Terpolymers. II. Mechanical properties and transition temperatures of terpolymers of vinyl stearate,vinyl acetate,and vinyl chloride

Vinyl stearate was studied as a major internal plasticizer in terpolymers containing vinyl acetate and vinyl chloride. The terpolymers were prepared by systematically replacing vinyl acetate by close increments of vinyl stearate starting with combinations of vinyl acetate and vinyl chloride, in increments, over all compositions. For comparison of properties, a complete range of copolymers of vinyl stearate and vinyl chloride, as well as mixtures of poly(vinyl chloride) and di-2-ethylhexyl phthalate (DOP) were also made. The external plasticizer was more efficient in reducing the glass temperature than was vinyl stearate. The decline in T_g with weight fraction of plasticizer was linear for the copolymers and terpolymers but concave downward with the liquid diluent. The linear decline was shown to involve mere additivity of the free volume contributed by each side-chain methylene (or methyl) group in both vinyl esters to reducing T_g. The mechanism of the diluent system was more complex. However, the magnitude of the reduction of tensile modulus at a given weight fraction of DOP could be equaled or exceeded by the same amount of vinyl stearate, by increasing the vinyl acetate content of the base copolymer to 40 mole-% or more. Unfortunately, the ultimate strengths and elongations of internally plasticized systems were reduced more than those of the mixtures at comparable compositions. Vinyl stearate was found to markedly retard photolytic degradation compared to both vinyl acetate and the external plasticizer in unstabilized samples having nearly the same thermal treatment. The effect was greater than could be ascribed to dilution by the long alkyl group. The production of a stearoyl radical more stable than the radicals initiating dehydrochlorination is suggested as a possible mechanism.     

Is the particle deposition in a cell exposure facility comparable to the lungs? A computer model approach

Abstract

Cell exposure experiments at the air-liquid interface (ALI) are used increasingly as indicators for health effects and for the impact of aerosols on the lung. Thereby the aerosol particles are kept airborne and can deposit on a cell surface area similar to the human respiratory tract (RT). However, geometry and air flow rates of an ALI system deviate considerably from the RT. As the tissue-delivered particle dose to the lungs (TD) can hardly be measured, computer models of particle deposition are used here to mimic both the particle deposition at ALI and in the RT. An ALI exposure setup (VitroCell GmbH) for an airflow rate of 100 cm³ min^?1 is selected, where the particle deposition model has been verified experimentally. For the RT we use the hygroscopic lung deposition model of Ferron et al. (2013 Ferron, G. A., S. Upadhyay, R. Zimmermann, and E. Karg. 2013. Model of the deposition of aerosol particles in the respiratory tract of the rat. II. Hygroscopic particle deposition. J. Aerosol Med. Pulm. Drug Deliv. 26 (2):101–19. doi:10.1089/jamp.2011.0965.[Crossref], [PubMed], [Web of Science ®] , [Google Scholar]). Model runs are performed for the particle deposition and for the deposited particles per surface area in both the ALI and the RT. The results show that the ALI-deposited mass is 1-2 orders of magnitude higher than in the alveolar region, because the surface area of the lung region is substantially larger. A particle size range from 40 to 450 nm is identified, where the ratio of both the deposition in a lung region and the deposition at the ALI varies by a factor less than two. Mean values for this ratio are 31 and 101 for the tracheo-bronchial and the alveolar region, respectively. The same size range is found for the ratio of the deposited particles per surface area in a lung region and at the ALI. For this range the mean surface deposition at the ALI is 23- and 1575-times larger than in the tracheo-bronchial and the alveolar lung region, respectively. The effect is partly compensated by different flow rate and cell size.

Copyright © 2020 American Association for Aerosol Research     

A mixed helix--beta-sheet model of the transmembrane region of the nicotinic acetylcholine receptor

We have modelled the transmembrane region of the 7 nicotinicacetylcholine receptor as a mixed -helical/ß-sheetstructure. The model was mainly based on the crystal structureof a pore-forming toxin, heat-labile enterotoxin. This is apentameric protein having a central pore or channel composedof five -helices, one from each of the 5 B subunits that formthis pentamer. The remainder of this structure is ß-sheet,loops and a short -helix, not included in the model. The modeluses this channel as a template to build the transmembrane region,from M1 to the middle of M3. The remainder of M3 and M4 werebuilt de novo as -helices. Great consideration was given tolabelling data available for the transmembrane region. In generalterms, the shape of the model agrees very well with that obtainedindependently by electron microscopic analysis and the secondarystructure predicted by the model is in accord with that estimatedindependently by Fourier transform infrared spectroscopy. TheM2 helical region of the model is only slightly kinked, contraryto what is inferred from electron microscopic analysis, buthas the same overall shape and form. On the membrane face ofthe model, the presence of deep pockets may provide the structuralbasis for the distinction between annular and non-annular lipidbinding sites. Also, the transmembrane region is clearly asymmetricin the direction perpendicular to the membrane, and this mayhave strong influence on the surrounding lipid composition ofeach leaflet of the cytoplasmic membrane.     

Mechanical properties and transition temperatures of copolymers of N-n-alkylacrylamides and vinylidene chloride

Mechanical and solution properties, melting transitions, torsional stiffness temperatures, T_f, and selected modulus-temperature curves are presented for copolymers of the N-n-alkylacrylamides with vinylidene chloride. Copolymers were prepared at 60°C across the range of compositions, using as comonomers N-n-butyl-, octyl-, dodecyl- and oleyl-acrylamide, which have amorphous side-chains, and N-n-octadecyl acrylamide and n-octadecyl acrylate whose side-chains are crystalline. The mechanical properties reflected the effect of the decline in backbone crystallinity and the simultaneous development of strong intermolecular interactions in the amorphous stage. Copolymers were stiff or showed brittle failure across the compositional range except when intermolecular forces were reduced (with n-octadrcyl acrylate) and side-chain crystallization eliminated (with N-oleylacrylamide). These systems and the n-dodecylacrylamide copolymers had yield strengths less than brittle strengths and substantial elongations. Backbone crystallinity was eliminated at about 15 mole % amide and side-chain crystallinity vanished at less than 10 mole % of the amide in the N-n-octadecylacrylamide series. No depression in side-chain melting point occurred with dilution by segments of vinylidene chloride. Over-all decline in the flex-temperature was the normal monotonic function of composition except that values increased in magnitude at high vinylidene chloride contents, the effect presumably being caused by the presence of crystallinity. An empirical equation was developed which permitted the calculation of T_f for any N-n-alkylacrylamide composition with any number of carbon atoms in the side-chain, above 3.     

Approximate similarity search for online multimedia services on distributed CPU–GPU platforms

Similarity search in high-dimensional spaces is a pivotal operation for several database applications, including online content-based multimedia services. With the increasing popularity of multimedia applications, these services are facing new challenges regarding (1) the very large and growing volumes of data to be indexed/searched and (2) the necessity of reducing the response times as observed by end-users. In addition, the nature of the interactions between users and online services creates fluctuating query request rates throughout execution, which requires a similarity search engine to adapt to better use the computation platform and minimize response times. In this work, we address these challenges with Hypercurves, a flexible framework for answering approximate k-nearest neighbor (kNN) queries for very large multimedia databases. Hypercurves executes in hybrid CPU–GPU environments and is able to attain massive query-processing rates through the cooperative use of these devices. Hypercurves also changes its CPU–GPU task partitioning dynamically according to the observed load, aiming for optimal response times. In our empirical evaluation, dynamic task partitioning reduced query response times by approximately 50 % compared to the best static task partition. Due to a probabilistic proof of equivalence to the sequential kNN algorithm, the CPU–GPU execution of Hypercurves in distributed (multi-node) environments can be aggressively optimized, attaining superlinear scalability while still guaranteeing, with high probability, results at least as good as those from the sequential algorithm.     

Coal liquefaction in nitrogen compounds

Model compound studies have shown that 1,2,3,4-tetrahydroquinoline is an exceptionally good coal solvent. In the pure compound, subbituminous coal conversion to THF-soluble products approaches 100% under relatively mild reaction conditions. The effectiveness of tetrahydroquinoline for coal conversion appears to be related to its concentration relative to coal. The unique behaviour of tetrahydroquinoline is ascribed to its being a highly active H-donor; the fact that it is regenerable under reaction conditions by the reaction of hydrogen and quinoline; and that its polarity allows penetration of the coal structure and aids in dispersion of the dissolved coal. It has been found that, during reaction with coal, tetrahydroquinoline and other nitrogen compounds undergo extensive condensation reactions which result in an increase in the nitrogen content of the high boiling and non-distillable liquefaction products.     

Surface Modification of Titania Nanoparticles Using Ultrathin Ceramic Films

Surface modification of titania nanoparticles was achieved by coating them with ultrathin alumina films using atomic layer deposition. The coating process was performed in a fluidized bed reactor at low pressure and under mechanical vibration. Films were deposited using self-limiting, sequential surface reactions of trimethylaluminum and water. The composition of alumina-coated particles was verified using infrared spectroscopy. The deposited films had an average growth rate of 0.2 nm/coating cycle and were highly uniform and conformal as demonstrated by transmission electron microscopy and X-ray spectroscopy. Deposited alumina films were amorphous as verified through X-ray diffraction and high-resolution electron microscopy. The coating process did not promote particle sintering as validated via particle size and surface area analysis.     

The effect of molecular structure on the gas transmission rates of aromatic polyimides

A series of high-molecular weight condensation polyimides was evaluated to determine the effect of polymer molecular structure on the transmission rate of oxygen, carbon dioxide, and water vapor. The polyimide films were prepared from either 3,3′,4,4′-benzophenone tetracarboxylic dianhydride (BTDA) or pyromellitic dianhydride (PMDA) with various diamines. The study shows that molecular structure had a strong influence on gas transmission rates with results for some films varying three orders of magnitude from that of other polyimide films. In general, the BTDA series of polyimides had overall lower gas transmission rates than the PMDA-derived series. Polymers prepared with meta-oriented diamines characteristically displayed lower gas transmission than those prepared with para-oriented diamines.     

Viscometric determination of the molecular weight of polymers in the low molecular weight region

In order to overcome the difficulty of the determination of the molecular weight of a polymer in the low molecular weight region by viscometry using the Mark–Houwink–Sakurada (MHS) equation, we have proposed the Dondos–Benoit relationship [η]^?1 = A₂ + AM^?1/2, for a number of polymer–solvent systems, for which we give the numerical values of the parameters A₁ and A₂. Furthermore, we suggest a method for the determination of the above parameters using the MHS constants a and k.