Modeling and simulation of mixed traffic on a prioritized shared medium

Network access systems (NAS) such as digital loop carriers (DLC) are increasingly utilizing a shared medium, such as Hybrid Fiber Coax (HFC) to provide point‐to‐multi‐point access from the public switched telephone network (PSTN) to the end user (consumer). New services, such as direct access to the packet switched network (PSN, WWW) have been added to DLC equipment in such a way as to provide for a prioritized set of services over a shared medium in an effort to take advantage of otherwise unused bandwidth. The introduction of such services requires the modeling and analysis of these network access systems. This becomes complex when considering the variability in different service type traffic characteristics. This work identifies a traffic engineering problem of prioritized circuit switched and packet switched (PSTN/PSN) traffic over the same shared medium as it may relate to “perceived” quality of service (QoS). Copyright © 2002 John Wiley & Sons, Ltd.     

Organizational Media Affordances: Operationalization and Associations with Media Use

The concept of affordances has been increasingly applied to the study of information and communication technologies (ICTs) in organizational contexts. However, almost no research operationalizes affordances, limiting comparisons and programmatic research. This article briefly reviews conceptualizations and possibilities of affordances in general and for media, then introduces the concept of organizational media affordances as organizational resources. Analysis of survey data from a large Nordic media organization identified six reliable and valid organizational media affordances: pervasiveness, editability, self-presentation, searchability, visibility, and awareness. Eight media scales based on frequency of use of 10 media within each of three organization levels were differentially associated with these affordances. The conceptualization, measurement approach, and results from this study provide the foundation for considerable future organizational communication and ICT research.     

A Generalized System for Photo-Responsive Membrane Rupture in Polymersomes

Polymersomes are vesicles whose membranes are comprised of self-assembled block co-polymers. We recently showed that co-encapsulating conjugated multi-porphyrin dyes in a polymersome membrane with ferritin protein in the aqueous lumen confers photo-lability to the polymersome. In the present study, we illustrate that the photo-lability can be extended to vesicles containing dextran, an inert and inexpensive polysaccharide, as the luminal solute. Here we explore how structural features of the polymersome/porphyrin/dextran composite affect its photo-response. Increasing dextran molecular weight, decreasing block copolymer molecular weight, and altering fluorophore-membrane interactions results in increasing the photo-responsiveness of the polymersomes. Amphiphilic interactions of the luminal encapsulant with the membrane coupled with localized heat production in the hydrophobic bilayer likely cause differential thermal expansion in the membrane and the subsequent membrane rupture. This study suggests a general approach to impart photo-responsiveness to any biomimetic vesicle system without chemical modification, as well as a simple, bio-inert method for constructing photo-sensitive carriers for controlled release of encapsulants.     

Simulation, modeling, and crystal growth of Cd0.9Zn0.1Te for nuclear spectrometers

High-quality, large (10 cm long and 2.5 cm diameter), nuclear spectrometer grade Cd_0.9Zn_0.1Te (CZT) single crystals have been grown by a controlled vertical Bridgman technique using in-house zone refined precursor materials (Cd, Zn, and Te). A state-of-the-art computer model, multizone adaptive scheme for transport and phase-change processes (MASTRAP), is used to model heat and mass transfer in the Bridgman growth system and to predict the stress distribution in the as-grown CZT crystal and optimize the thermal profile. The model accounts for heat transfer in the multiphase system, convection in the melt, and interface dynamics. The grown semi-insulating (SI) CZT crystals have demonstrated promising results for high-resolution room-temperature radiation detectors due to their high dark resistivity (ρ≈2.8 × 10¹¹ Θ cm), good charge-transport properties [electron and hole mobility-life-time product, μτ_e≈(2–5)×10⁻³ and μτ_h≈(3–5)×10⁻⁵ respectively, and low cost of production. Spectroscopic ellipsometry and optical transmission measurements were carried out on the grown CZT crystals using two-modulator generalized ellipsometry (2-MGE). The refractive index n and extinction coefficient k were determined by mathematically eliminating the ∼3-nm surface roughness layer. Nuclear detection measurements on the single-element CZT detectors with ²⁴¹Am and ¹³⁷Cs clearly detected 59.6 and 662 keV energies with energy resolution (FWHM) of 2.4 keV (4.0%) and 9.2 keV (1.4%), respectively.     

Quasi-elliptic compact high-power notch filters using a mixedlumped and distributed circuit

A quasi-elliptic notch filter response is defined as one in which the ultimate stopband depth is sacrificed in favor of a faster transition from the passband to a specified minimum equiripple stopband attenuation level (i.e., steeper attenuation slope) with no increase in filter order (as compared to a Chebyshev or similar transfer function design). Such notch-filter responses can be achieved if the topology synthesized includes arbitrary frequency invariant impedances and line lengths in the main series line of filters. Using lumped approximations to the series coaxial sections but with the series sections not at 50 Ω (for a 50-Ω filter), it is possible to improve upon the Chebyshev-based results. The resulting network provides lower passband insertion loss, with no reduction in minimum notch depth or power handling, improved temperature performance and additional harmonic reduction. The improvements are due to the implementation of the quasi-elliptic response defined above, and are made possible by the larger range of main line impedances and line lengths available using inductors and capacitors rather than lengths of transmission line. In principle, the technique can be extended to achieve full-elliptic responses     

A comparison of noninvasive reconstruction of epicardial versus transmembrane potentials in consideration of the null space

We compare two source formulations for the electrocardiographic forward problem in consideration of their implications for regularizing the ill-posed inverse problem. The established epicardial potential source model is compared with a bidomain-theory-based transmembrane potential source formulation. The epicardial source approach is extended to the whole heart surface including the endocardial surfaces. We introduce the concept of the numerical null and signal space to draw attention to the problems associated with the nonuniqueness of the inverse solution and show that reconstruction of null-space components is an important issue for physiologically meaningful inverse solutions. Both formulations were tested with simulated data generated with an anisotropic heart model and with clinically measured data of two patients. A linear and a recently proposed quasi-linear inverse algorithm were applied for reconstructions of the epicardial and transmembrane potential, respectively. A direct comparison of both formulations was performed in terms of computed activation times. We found the transmembrane potential-based formulation is a more promising source formulation as stronger regularization by incorporation of biophysical a priori information is permitted.     

Modular Assembly of Red Blood Cell Superstructures from Metal–Organic Framework Nanoparticle-Based Building Blocks

Bio/artificial hybrid nanosystems based on biological matter and synthetic nanoparticles (NPs) remain a holy grail of materials science. Herein, inspired by the well-defined metal–organic framework (MOF) with diverse chemical diversities, the concept of “armored red blood cells” (armored RBCs) is introduced, which are native RBCs assembled within and protected by a functional exoskeleton of interlinked MOF NPs. Exoskeletons are generated within seconds through MOF NP interlocking based on metal-phenolic coordination and RBC membrane/NP complexation via hydrogen-bonding interactions at the cellular interface. Armored RBC formation is shown to be generalizable to many classes of MOF NPs or any NPs that can be coated by MOF. Moreover, it is found that armored RBCs preserve the original properties of RBCs (such as oxygen carrier capability and good ex ovo/in vivo circulation property) and show enhanced resistance against external stressors (like osmotic pressure, detergent, toxic NPs, and freezing conditions). By modifying the physicochemical properties of MOF NPs, armored RBCs provide the capability for blood nitric oxide sensing or multimodal imaging. The synthesis of armored RBCs is straightforward, reliable, and reversible and hence, represent a new class of hybrid biomaterials with a broad range of functionalities.     

Self‐Assembled Conjugated Thiophene‐Based Rotaxane Architectures: Structural,Computational, and Spectroscopic Insights into Molecular Aggregation

A comparative study of the self‐assembly at a variety of surfaces of a dithiophene rotaxane 1 ?β‐CD and its corresponding dumbbell, 1, by means of atomic force microscopy (AFM) imaging and scanning tunneling microscopy (STM) imaging on the micrometer and nanometer scale, respectively. The dumbbell is found to have a greater propensity to form ordered supramolecular assemblies, as a result of π–π interactions between dithiophenes belonging to adjacent molecules, which are hindered in the rotaxane. The fine molecular structure determined by STM was compared to that obtained by molecular modelling. The optical properties of both rotaxane and dumbbell in the solid state were investigated by steady‐state and time‐resolved photoluminescence (PL) experiments on spin‐cast films and diluted solutions. The comparison between the optical features of the threaded and unthreaded systems reveals an effective role of encapsulation in reducing aggregation and exciton migration for the rotaxanes with respect to the dumbbells, thus leading to higher PL quantum efficiency and preserved single‐molecule photophysics for longer times after excitation in the threaded oligomers.     

Impact of “terminal effect” on Cu electrochemical deposition: Filling capability for different metallization options

The 300 mm wafer copper electrochemical deposition (ECD) process for dual damascene metallization of semiconductor advanced interconnects is critically reviewed and the breakthroughs that enable further scaling of this process are examined. Special emphasis is placed on analyzing the critical issues, such as barrier/seed options, terminal effect and future plating prospects for this technology. The smallest plateable feature size values are estimated for different metallization integration schemes, such as conventional Physical Vapor Deposited (PVD) TaN/Ta/Cu, hybrid RuTa/Cu, CuMn (8%) self-forming barrier/seed, and Plasma-Enhanced Atomic Layer Deposition (PEALD) Ru, limiting the allowed maximum sheet resistance to 14 Ohms/sq for the Cu-based seeds and the effective maximum filling aspect ratio to 5-6.