Electroantennographic and behavioral responses of the sphinx moth Manduca sexta to host plant headspace volatiles

Coupled gas chromatography with electroantennographic detection (GC-EAD) using antennae of adult female Manduca sexta was employed to screen for olfactory stimulants present in headspace collections from four species of larval host plants belonging to two families: Solanaceae—Lycopersicon esculentum (tomato), Capiscum annuum (bell pepper), and Datura wrightii; and Martyniaceae—Proboscidea parviflora. Headspace volatiles were collected from undamaged foliage of potted, living plants. GC–EAD revealed 23 EAD-active compounds, of which 15 were identified by GC-mass spectrometry. Identified compounds included aliphatic, aromatic, and terpenoid compounds bearing a range of functional groups. Nine EAD-active compounds were common to all four host plant species: (Z)-3-hexenyl acetate, nonanal, decanal, phenylacetaldehyde, methyl salicylate, benzyl alcohol, geranyl acetone, (E)-nerolidol, and one unidentified compound. Behavioral responses of female moths to an eight-component synthetic blend of selected tomato headspace volatiles were tested in a laboratory wind tunnel. Females were attracted to the blend. A comparison of responses from antennae of males and females to bell pepper headspace volatiles revealed that males responded to the same suite of volatiles as females, except for (Z)-3-hexenyl benzoate. EAD responses of males also were lower for (Z)- and (E)-nerolidol and one unidentified compound. Electroantennogram EAG dose–response curves for the 15 identified EAD-active volatiles were recorded. At the higher test doses (10–100 g), female antennae yielded larger EAG responses to terpenoids and to aliphatic and aromatic esters. Male antennae did respond to the higher doses of (Z)-3-hexenyl benzoate, indicating that they can detect this compound. On the basis of ubiquity of the EAD-active volatiles identified to date in host plant headspace collections, we suggest that M. sexta uses a suite of volatiles to locate and identify appropriate host plants.     

CREEP DEFORMATION OF INTERMETALLIC ALLOYS

ＣＲＥＥＰＤＥＦＯＲＭＡＴＩＯＮＯＦＩＮＴＥＲＭＥＴＡＬＬＩＣＡＬＬＯＹＳＧｅｒｈａｒｄＳａｕｔｈｏｆｆ（Ｍａｘ－Ｐｌａｎｃｋ－ＩｎｓｔｉｔｕｔｆｕｒＥｉｓｅｎｆｏｒｓｃｈｕｎｇＧｍｂＨ．，Ｄ－４００７４Ｄｕｓｓｅｌｄｏｒｆ，Ｇｅｒｍａｎｙ）Ａｂｓｔ...     

3D ActionSLAM: wearable person tracking in multi-floor environments

We present 3D ActionSLAM, a stand-alone wearable system that can track people in previously unknown multi-floor environments with sub-room accuracy. ActionSLAM stands for action-based simultaneous localization and mapping: It fuses dead reckoning data from a foot-mounted inertial measurement unit with the recognition of location-related actions to build and update a local landmark map. Simultaneously, this map compensates for position drift errors that accumulate in open-loop tracking by means of a particle filter. To evaluate the system performance, we analyzed 23 tracks with a total walked distance of 6,489 m in buildings with up to three floors. The algorithm robustly (93 % of runs converged) mapped the areas with a mean landmark positioning error of 0.59 m. As ActionSLAM is fully stand-alone and not dependent on external infrastructure, it is well suited for patient tracking in remote health care applications. The algorithm is computationally light-weight and runs in real-time on a Samsung Galaxy S4, enabling immediate location-aware feedback. Finally, we propose visualization techniques to facilitate the interpretation of tracking data acquired with 3D ActionSLAM.     

Motion Planning with Pulley, Rope, and Baskets

We study a motion planning problem where items have to be transported from the top room of a tower to the bottom of the tower, while simultaneously other items have to be transported in the opposite direction. Item sets are moved in two baskets hanging on a rope and pulley. To guarantee stability of the system, the weight difference between the contents of the two baskets must always stay below a given threshold. We prove that it is $\varPi_{2}^{p}$ -complete to decide whether some given initial situation of the underlying discrete system can lead to a given goal situation. Furthermore we identify several polynomially solvable special cases of this reachability problem, and we also settle the computational complexity of a number of related questions.     

Towards long term monitoring of electrodermal activity in daily life

Manic depression, also known as bipolar disorder, is a common and severe form of mental disorder. The European research project MONARCA aims at developing and validating mobile technologies for multi-parametric, long term monitoring of physiological and behavioral information relevant to bipolar disorder. One aspect of MONARCA is to investigate the long term monitoring of Electrodermal activity (EDA) to support the diagnosis and treatment of bipolar disorder patients. EDA is known as an indicator of the emotional state and the stress level of a person. To realize a long-term monitoring of the EDA, the integration of the sensor system in the shoe or sock is a promising approach. This paper presents a first step towards such a sensor system. In a feasibility study including 8 subjects, we investigate the correlation between EDA measurements at the fingers, which is the most established sensing site, with measurements of the EDA at the feet. The results indicate that 88% of the evoked skin conductance responses (SCRs) occur at both sensing sites. When using an action movie as psychophysiologically activating stimulus, we have found weaker reactivity in the foot than in the hand EDA. The results also suggest that the influence of moderate physical activity on EDA measurements is low and has a similar effect for both recording sites. This suggests that the foot recording location is suitable for recordings in daily life even in the presence of moderate movement.     

TeraGrid Science Gateways and Their Impact on Science

The Science Gateways program seeks to provide researchers with easy access to TeraGrid's high-performance computing resources. A look at four successful gateways illustrates the program's goals, challenges, and opportunities.     

Prediction-based methods for teleoperation across delayed networks

The remote nature of telepresence scenarios can be seen as a strongpoint and also as a weakness. Although it enables the remote control of robots in dangerous or inaccessible environments, it necessarily involves some kind of communication mechanism for the transmission of control signals. This communication mechanism necessarily involves adverse network effects such as delay. Three mechanisms aimed at improving the effects of network delay are presented in this paper: (1) Motion prediction to partially compensate for network delays, (2) force prediction to learn a local force model, thereby reducing dependency on delayed force signals, and (3) haptic data compression to reduce the required bandwidth of high frequency data. The utilized motion prediction scheme was shown to improve operator performance, but had no influence on operator immersion. The force prediction provided haptic feedback through synchronous forces from the local model, thereby stabilizing the control loop. The developed haptic data compression scheme reduced the number of packets sent across the network by 90%, while improving the quality of the haptic feedback.     

Attacking smart card systems: Theory and practice

Smart card technology has evolved over the last few years following notable improvements in the underlying hardware and software platforms. Advanced smart card microprocessors, along with robust smart card operating systems and platforms, contribute towards a broader acceptance of the technology. These improvements have eliminated some of the traditional smart card security concerns. However, researchers and hackers are constantly looking for new issues and vulnerabilities. In this article we provide a brief overview of the main smart card attack categories and their corresponding countermeasures. We also provide examples of well-documented attacks on systems that use smart card technology (e.g. satellite TV, EMV, proximity identification) in an attempt to highlight the importance of the security of the overall system rather than just the smart card.     

Transport ticketing security and fraud controls

For many years, public transportation systems have been an essential part of day-to-day life and so the principle of needing a “ticket” has been familiar to generations of travellers. However as technology has advanced it has become possible to make use of electronic tickets that have significant advantages both for travellers and for the transport system operators. There has been a lot of recent publicity regarding weaknesses in some electronic ticket solutions; which whilst based on some solid facts tend to suggest that transport ticket security and fraud control is primarily a smart card/RFID technology issue. However this cannot be the case as systems exist that do not use such technology; or use it along side legacy systems. This paper will consider technology problems, but will first establish the bigger picture of transport ticketing and will finally make suggestions for future evolution of such systems.