A Genetic Dissociation of Learning and Recall in Caenorhabditis elegans.

A learning event can be dissociated into 3 components: acquisition, storage, and recall. When the laboratory wild-type strain of Caenorhabditis elegans (N2 strain) is exposed to benzaldehyde in the absence of food, the worms display a reduction of their attractive response to this volatile odorant. This results from the association between benzaldehyde and a nutrient-deficient environment. Another wild-type isolate, the CB4856 strain, fails to display this decreased response to benzaldehyde after exposure to benzaldehyde in the absence of food. However, like the N2 strain, when tested to isoamyl alcohol after benzaldehyde conditioning, the CB4856 strain displays a decreased isoamyl alcohol response. Therefore, the CB4856 strain does not have an acquisition deficit, but it suffers from a recall deficit specific to benzaldehyde. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Non-point sources and the waste discharge charge system.

The development of a waste discharge charge system (WDCS) in South Africa has been proposed to promote waste reduction and water conservation. The WDCS is based on the polluter pays principle and is designed such that the management of waste discharges achieves resource quality objectives (RQOs) at the minimum total cost to the catchment. Two charges are distinguished: first a charge for optimising use of the resource (incentive charge); and secondly, a charge for development and operation of mitigation measures in the resource (mitigation charge). The WDCS is applied to both point sources and non-point sources (NPS) of contamination. In the inclusion of NPS, the charge system distinguishes between registered and non-registered NPS, with the charge applied to the former group only, in the first instance. This paper introduces the WDCS by describing the principles and the theoretical basis of the WDCS, highlighting the link to RQOs as the benchmark of acceptable externalities. The paper explores the inclusion of NPS in the WDCS, describing: first, the principles of NPS inclusion in the WDCS; secondly, the types of NPS included in the present version of the WDCS; thirdly, the methodology for charge estimation; and finally, non-registered NPS and their potential inclusion in future editions of the WDCS. The paper concludes with remarks and challenges facing the first edition of the WDCS.     

New climate change scenarios for the Netherlands.

A new set of climate change scenarios for 2050 for the Netherlands was produced recently. The scenarios span a wide range of possible future climate conditions, and include climate variables that are of interest to a broad user community. The scenario values are constructed by combining output from an ensemble of recent General Climate Model (GCM) simulations, Regional Climate Model (RCM) output, meteorological observations and a touch of expert judgment. For temperature, precipitation, potential evaporation and wind four scenarios are constructed, encompassing ranges of both global mean temperature rise in 2050 and the strength of the response of the dominant atmospheric circulation in the area of interest to global warming. For this particular area, wintertime precipitation is seen to increase between 3.5 and 7% per degree global warming, but mean summertime precipitation shows opposite signs depending on the assumed response of the circulation regime. Annual maximum daily mean wind speed shows small changes compared to the observed (natural) variability of this variable. Sea level rise in the North Sea in 2100 ranges between 35 and 85 cm. Preliminary assessment of the impact of the new scenarios on water management and coastal defence policies indicate that particularly dry summer scenarios and increased intensity of extreme daily precipitation deserves additional attention in the near future.     

Investigation of bounds on particle packing in pebble-bed high temperature reactors

Models and methods are presented for determining practical limits of the packing density of TRISO particles in fuel pebbles for a pebble-bed reactor (PBR). These models are devised for designing and interpreting fuel testing experiments. Two processes for particle failure are accounted for: failure of touching particles at the pressing stage in the pebble manufacturing process and failure due to inner pressure buildup during irradiation. The second process gains importance with increasing fuel temperature, which limits the particle packing density and the corresponding fuel enrichment. Suggestions for improvements to the models are presented.     

Upgrading coal-derived liquids to diesel fuel

Distilled fractions of a coal-derived liquid from the H-Coal process were upgraded to diesel fuel by catalytic hydrotreatment. The total hydrotreated products were distilled into naphtha (<180°C) and diesel fuel fractions (>180°C) and the diesel fractions were analysed for hydrocarbon-type composition, hydrogen content and some diesel fuel properties. GC—MS-analyses were carried out on the hydrocarbon-type fractions to identify individual chemical compounds. To investigate the effect of different distillation cut points on diesel fuel yield and properties, cut points for one hydrotreated product were varied. The diesel fuel cetane numbers were correlated with percentage hydrogen, total aromatics and saturates. Cetane numbers above 40 were obtained for diesel fuels containing (i) more than 75% saturates, (ii) less than 15% total aromatics and (iii) a hydrogen content above 12.8%. Compounds identified by GC—MS-analyses (in the diesel fractions) were typical aromatic and cycloparaffin compounds. Normal-and iso-paraffin compounds were not detected. By varying the distillation cut point from 135 to 180°C, the cetane number of the residual diesel fraction improved from 37 to 44. This increase is ascribed to the removal of aromatic compounds in the 135–180°C boiling point range.     

A case of cognac adulteration

Summary Linear discriminant analysis of GLC-aromagram data is used to separate several classes of wine distillates, namely cognac, armagnac and brandy. In this paper we demonstrate how this method was used to detect adulteration. The adulteration was confirmed by the presence of ethyl heptanoate and limonene, which are well-known flavour compounds. They were analysed by means of a Purge and Trap headspace technique. Mass spectrometry was used to identify these flavours.

---

Ein Beispiel für die Verfälschung von Cognac

Zusammenfassung Die Linear-Discriminanz-Analyse von GLC-Aromagramm-Daten wird zur Klassifizierung von Weindestillaten wie Cognac, Armagnac und Brandy verwendet. In dieser Arbeit werden mit dieser Methode Verfälschungen nachgewiesen, die durch die Gegenwart der Ethylester der Heptansäure und des Limonen belegt werden konnten. Diese Substanzen wurden mit der Purge- und Trap-Methode erfaßt und massenspektrometrisch identifiziert.