A parametric study of the deposition of the TiN thin films by laser reactive ablation of titanium targets in nitrogen: the roles of the total gas pressure and the contaminations with oxides

The multipulse excimer laser-reactive ablation of a titanium target in nitrogen has been found to result in a total pressure of the ambient gas in the range 7–70 bar, in the deposition on to a silicon collector surface of high-purity f c c TiN thin films. These films were hard and adherent to substrate. The deposition rate was 0.03–0.05 nm per pulse for an incident laser fluence of 5 J cm^–2. For a lower gas pressure of a few microbars the deposits were amorphized with an excess of titanium. For a nitrogen pressure larger than 100 bar, the layers were contaminated with oxides. The oxides became more abundant with further increase in the gas pressure, and the deposited layer consisted of oxides only when the pressure reached several millibars.     

Characterization and applications of a new composite material obtained by green synthesis,through deposition of zinc oxide onto calcium carbonate precipitated in green seaweeds extract

Zinc oxide was deposited onto calcium carbonate precipitated using a template of polysaccharides from Ulva lactuca green seaweeds (Black Sea). The resulted composite material was characterized by X-ray diffraction, scanning electron microscopy, energy-dispersive X-ray spectroscopy, UV–vis and FTIR spectroscopy. The therapeutic effect of prepared composite material was assessed in vivo as a topical application for the burns treatment and compared with that of ZnO. An increased antioxidant activity by combining zinc oxide with calcium carbonate capped with polysaccharides from green seaweeds extract in a composite material was demonstrated.     

Optimization of synthesis parameters in interfacial polycondensation using design of experiments

The reaction of phenylphosphonic dichloride with 4,4′-cyclohexylidenebisphenol by a gas–liquid interfacial polycondensation was investigated. The design of experiments (DoE) method is used for determination of the best reaction conditions. The correlation of simultaneous influence of the parameters (reaction time, reaction temperature, alkaline medium, reagents molar ratio) on yield and inherent viscosity was studied.     

Novel nanomaterials based on 5,10,15,20-tetrakis(3,4-dimethoxyphenyl)-21H,23H-porphyrin entrapped in silica matrices

The present study is dealing with the obtaining of transparent hybrid silica materials encapsulating 5,10,15,20-tetrakis(3,4-dimethoxyphenyl)-21H,23H-porphyrin designated for advanced optoelectronic devices. The porphyrin was synthesized by three methods: an Adler-type reaction between pyrrole and 3,4-dimethoxybenzaldehyde in propionic acid medium; by Lindsey condensation of pyrrole with 3,4-dimethoxybenzaldehyde in the presence of BF₃·OEt₂ and by a multicomponent reaction by simultaneously using of pyrrole and two different aldehydes: 3,4-dimethoxybenzaldehyde and 3-hydroxybenzaldehyde. The 3,4-dimethoxyphenyl substituted porphyrin was characterized by HPLC, TLC, UV-vis, FT-IR, ¹H NMR and ¹³C NMR analysis. Excitation and emission spectra were also discussed in terms of pH conditions. The hybrid materials, consisting in the porphyrin encapsulated in silica matrices, have been prepared successfully via the two steps acid-base catalyzed hydrolysis and condensation of tetraethylorthosilicate using different approaches of the sol-gel process: in situ, by impregnation and by sonication. The synthetic conditions and the compositions were monitored and characterized by using spectroscopic methods such as FT-IR, fluorescence and UV-vis. Atomic force microscopy (AFM) has been applied to observe the columnar or pyramidal nanostructures which are formed by the immobilization of porphyrin on the silica matrices.     

Kinetic studies on the irinotecan release based on structural properties of functionalized mesoporous-silica supports

Building a detailed kinetic model for the drug release from an ordered mesoporous support is a difficult task due to various physico-chemical processes involved, including complex adsorption-desorption and diffusion steps. A compartmented mechanistic model for the drug release from a silica mesoporous (functionalized) support is elaborated to correlate the experimental drug release data under various release conditions. The identified model parameters are interpreted in relationship to the delivery system characteristics (drug, support, and linker properties) to be used for designing a system with a controlled release. Extended model predictions are compared with those of various semi-empirical or overall diffusion models in terms of quality (adequacy, validity, reliability) and parameter significance to determine the information loss when simplified models are used for design purposes. Exemplification is made for the release of irinotecan from a MCM-41 support unfunctionalized vs. functionalized with 3-aminopropyl triethoxysilane or triethoxyvinylsilane in a synthetic intestinal fluid.     

Infinite anti-uniform sources

In this paper we consider the class of anti-uniform Huffman (AUH) codes for sources with infinite alphabet. Poisson, negative binomial, geometric and exponential distributions lead to infinite anti-uniform sources for some ranges of their parameters. Huffman coding of these sources results in AUH codes. We prove that as a result of this encoding, we obtain sources with memory. For these sources we attach the graph and derive the transition matrix between states, the state probabilities and the entropy. If c₀ and c₁ denote the costs for storing or transmission of symbols “0” and “1”, respectively, we compute the average cost for these AUH codes.     

Nanoscale mapping of contact stiffness and damping by contact resonance atomic force microscopy

In this work, a new procedure is demonstrated to retrieve the conservative and dissipative contributions to contact resonance atomic force microscopy (CR-AFM) measurements from the contact resonance frequency and resonance amplitude. By simultaneously tracking the CR-AFM frequency and amplitude during contact AFM scanning, the contact stiffness and damping were mapped with nanoscale resolution on copper (Cu) interconnects and low-k dielectric materials. A detailed surface mechanical characterization of the two materials and their interfaces was performed in terms of elastic moduli and contact damping coefficients by considering the system dynamics and included contact mechanics. Using Cu as a reference material, the CR-AFM measurements on the patterned structures showed a significant increase in the elastic modulus of the low-k dielectric material compared with that of a blanket pristine film. Such an increase in the elastic modulus suggests an enhancement in the densification of low-k dielectric films during patterning. In addition, the subsurface response of the materials was investigated in load-dependent CR-AFM point measurements and in this way a depth dimension was added to the common CR-AFM surface characterization. With the new proposed measurement procedure and analysis, the present investigation provides new insights into characterization of surface and subsurface mechanical responses of nanoscale structures and the integrity of their interfaces.     

Microfluidic devices modulate tumor cell line susceptibility to NK cell recognition

This study aims to adoptively reduce the major histocompatibility complex class I (MHC-I) molecule surface expression of cancer cells by exposure to microfluid shear stress and a monoclonal antibody. A microfluidic system is developed and tumor cells are injected at different flow rates. The bottom surface of the microfluidic system is biofunctionalized with antibodies (W6/32) specific for the MHC-I molecules with a simple method based on microfluidic protocols. The antibodies promote binding between the bottom surface and the MHC-I molecules on the tumor cell membrane. The cells are injected at an optimized flow rate, then roll on the bottom surface and are subjected to shear stress. The stress is localized and enhanced on the part of the membrane where MHC-I proteins are expressed, since they stick to the antibodies of the system. The localized stress allows a stripping effect and consequent reduction of the MHC-I expression. It is shown that it is possible to specifically treat and recover eukaryotic cells without damaging the biological samples. MHC-I molecule expression on treated and control cell surfaces is measured on tumor and healthy cells. After the cell rolling treatment a clear reduction of MHC-I levels on the tumor cell membrane is observed, whereas no changes are observed on healthy cells (monocytes). The MHC-I reduction is investigated and the possibility that the developed system could induce a loss of these molecules from the tumor cell surface is addressed. The percentage of living tumor cells (viability) that remain after the treatment is measured. The changes induced by the microfluidic system are analyzed by fluorescence-activated cell sorting and confocal microscopy. Cytotoxicity tests show a relevant increased susceptibility of natural killer (NK) cells on microchip-treated tumor cells.     

Spark-plasma-sintering temperature dependence of structural and piezoelectric properties of BNT–BT<Subscript>0.08</Subscript> nanostructured ceramics

(Bi_0.5Na_0.5)TiO₃ doped with 8 mol% BaTiO₃ powder prepared by sol–gel was compacted and sintered by spark-plasma-sintering method. The influence of spark-plasma-sintering temperature on the densification and piezoelectric properties of these ceramics was studied. Starting from BNT–BT_0.08 powder gel with a microstructure consisting of particles with average size of 50 nm, ceramics with grain size of 60–90 nm and density of about 98.9–99.6% of the theoretical density were obtained by spark-plasma-sintering at 800–900 °C. Increasing the sintering temperature by SPS from 800 to 900 °C lead to the increase of d ₃₃, k _p, ε₃₃^T and, decrease of Q _m. Typical d ₃₃ and k _p values of BNT–BT_0.08 ceramics sintered by spark-plasma-sintering at 900 °C were 8 and 0.029, respectively.