A design-oriented approach for managing colored light sources in lighting design software

In the last decade, the extensive introduction of LED lighting sources has brought elements of innovation to interior lighting design in terms of color. Besides the new tunable white LED source, lighting is no longer exclusively white; indeed, colored lighting has entered the design practice thanks to the positive effects on people's health and mood. Unfortunately, this element of lighting innovation, color, cannot be computed correctly in commercial lighting design software. These computations are based on the assumption that light is only white or defined in terms of RGB triplets in the relative digital color space of computer graphics, which does not have a physically correct relationship with the actual spectral power distribution (SPD) of luminaires. In this paper, attention is focused on a practical design-oriented approach for describing luminaires in lighting design software that also considers the real SPD and the luminous intensity distribution. The focus is on information available to lighting designers who do not have a laboratory to measure light sources and luminaires. This information could be available in online datasheets or as a Cartesian graph from luminaires and light sources manufacturers. Following this approach, a set of functions is proposed that can be easily implemented in lighting design software to improve light sources' color management and allow lighting designers to add SPD data to luminaires.     

Internal structure of bitumen/polymer/wax ternary mixtures for warm mix asphalts

Polymer modified asphalts (PMA) and warm mix asphalts (WMA) are technologies widely adopted in the paving industry. The first one is well established, while the second one is relatively new, but rapidly growing since it guarantees economic and environmental advantages. Until now PMA and WMA have been used disjointedly, but it would be useful to combine them to keep the advantages of both. One of the adopted solutions to obtain a warm effect is the addition of waxes to the asphaltic binder. Therefore, a “warm mix polymer modified asphalt” may be potentially obtained with a ternary asphalt/polymer/wax system. However, the final warm effect and performances of the binder will depend on the interactions between the three components. A preliminary investigation was done by mixing asphalt, styrene‐butadiene‐styrene block copolymer and a wax chosen among the following three categories: paraffinic, partially oxidized and maleic anhydride functionalized. The morphological and calorimetric analyses and solubility tests allowed identifying different behaviors depending on the wax type, which may preferentially interact either with the asphalt or with the polymer, thus influencing the whole binder structure. With regard to the ternary mixes, it was found that: (i) the paraffinic wax preferentially resides in the polymer‐rich phase, and slightly enhances the asphalt‐polymer compatibility; (ii) the partially oxidized wax prefers the asphaltene‐rich phase and reduces the compatibility; (iii) it is not clear where the functionalized wax is located, but it has a considerable compatibilizing effect and strongly alters the colloidal equilibrium of the asphalt‐polymer blend. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Synthesis of Indole Derivatives from 2-Alkynylanilines by Means of Gold Catalysis

The peculiar features of gold(III) and gold(I) species include exceptional carbophilicity and, at the same time, lone pair affinity. Such a combination offers many advantages for the development of more sustainable approaches to the synthesis of indole derivatives from readily available 2-alkynylanilines. This mini-review critically summarizes the literature reports in this field, with the aim to encourage further research activities in this promising area.     

Electrostatic effects on the thermodynamics of protonation of reduced plastocyanin

The L12E, L12K, Q88E, and Q88K variants of spinach plastocyanin have been electrochemically investigated. The effects of insertion of net charges near the metal site on the thermodynamics of protonation and detachment from the copper(I) ion of the His87 ligand have been evaluated. The mutation-induced changes in transition enthalpy cannot be explained by electrostatic considerations. The existence of enthalpy/entropy (H/S) compensation within the protein series indicates that solvent-reorganization effects control the differences in transition thermodynamics. Once these compensating contributions are factorized out, the resulting modest differences in transition enthalpies turn out to be those that can be expected on purely electrostatic grounds. Therefore, this work shows that the acid transition in cupredoxins involves a reorganization of the H-bonding network within the hydration sphere of the molecule in the proximity of the metal center that dominates the observed transition thermodynamics and masks the differences that are due to protein-based effects.     

Digital light processing stereolithography of hydroxyapatite scaffolds with bone-like architecture,permeability, and mechanical properties

This work deals with the additive manufacturing and characterization of hydroxyapatite scaffolds mimicking the trabecular architecture of cancellous bone. A novel approach was proposed relying on stereolithographic technology, which builds foam-like ceramic scaffolds by using three-dimensional (3D) micro-tomographic reconstructions of polymeric sponges as virtual templates for the manufacturing process. The layer-by-layer fabrication process involves the selective polymerization of a photocurable resin in which hydroxyapatite particles are homogeneously dispersed. Irradiation is performed by a dynamic mask that projects blue light onto the slurry. After sintering, highly-porous hydroxyapatite scaffolds (total porosity ~0.80, pore size 100-800 µm) replicating the 3D open-cell architecture of the polymeric template as well as spongy bone were obtained. Intrinsic permeability of scaffolds was determined by measuring laminar airflow alternating pressure wave drops and was found to be within 0.75-1.74 × 10⁻⁹ m², which is comparable to the range of human cancellous bone. Compressive tests were also carried out in order to determine the strength (~1.60 MPa), elastic modulus (~513 MPa) and Weibull modulus (m = 2.2) of the scaffolds. Overall, the fabrication strategy used to print hydroxyapatite scaffolds (tomographic imaging combined with digital mirror device [DMD]-based stereolithography) shows great promise for the development of porous bioceramics with bone-like architecture and mass transport properties.     

Serum lipid analysis and isotopic enrichment is suggestive of greater lipogenesis in young long-term cannabis users: A secondary analysis of a case–control study

Cannabis is now legal in many countries and while numerous studies have reported on its impact on cognition and appetite regulation, none have examined fatty acid metabolism in young cannabis users. We conducted an exploratory analysis to evaluate cannabis impact on fatty acid metabolism in cannabis users (n = 21) and non-cannabis users (n = 16). Serum levels of some saturated and monounsaturated fatty acids, including palmitic, palmitoleic, and oleic acids were higher in cannabis users compared to nonusers. As palmitic acid can be derived from diet or lipogenesis from sugars, we evaluated lipogenesis using a de novo lipogenesis index (palmitate/linoleic acid) and carbon-specific isotope analysis, which allows for the determination of fatty acid ¹³C signature. The significantly higher de novo lipogenesis index in the cannabis users group along with a more enriched ¹³C signature of palmitic acid suggested an increase in lipogenesis. In addition, while serum glucose concentration did not differ between groups, pyruvate and lactate were lower in the cannabis user group, with pyruvate negatively correlating with palmitic acid. Furthermore, the endocannabinoid 2-arachidonoylglycerol was elevated in cannabis users and could contribute to lipogenesis by activating the cannabinoid receptor 1. Because palmitic acid has been suggested to increase inflammation, we measured peripheral cytokines and observed no changes in inflammatory cytokines. Finally, an anti-inflammatory metabolite of palmitic acid, palmitoylethanolamide was elevated in cannabis users. Our results suggest that lipogenic activity is increased in cannabis users; however, future studies, including prospective studies that control dietary intake are required.     

Fast and Minimally Invasive Determination of the Unsaturation Index of White Fat Depots by Micro-Raman Spectroscopy

In the last 20 years increasing interest has been devoted to the investigation of white adipose tissue (WAT) because hypo- or hyperfunction of WAT is involved in the pathogenesis of obesity and other pathologies. The investigation and discrimination of different characteristics in adipose tissues by means of spectroscopic techniques appears as a topic of current interest, also in view of possible medical–technological applications. The aim of this work was to establish micro-Raman spectroscopy as a tool for the characterization of mammals fat tissue. After preliminary tests aimed at defining a suitable sample preparation protocol, Raman spectra of WAT specimens excised from mice of different ages were recorded in the energy range 750–3,350 cm⁻¹. Quantitative values of the unsaturation index were obtained through the calibration with HR-NMR spectra of lipid extracts. Raman spectroscopy detected a sharp increase in the unsaturation index between 22 and 30 days of age in close correspondence with the weaning of mice (21 days). The present results show that Raman spectroscopy is an inexpensive, fast and robust technique to analyze the unsaturation index of mammals fat tissues that could be routinely used in bioptic samples.     

Coating carbon nanotubes with a polystyrene-based polymer protects against pulmonary toxicity

Background  

carbon nanotubes (CNT) can have adverse effects on health. Therefore, minimizing the risk associated with CNT exposure is of crucial importance. The aim of this work was to evaluate if coating multi-walled CNT (MWCNT) with polymers could modify their toxicity, thus representing a useful strategy to decrease adverse health effects of CNT. We used industrially-produced MWCNT uncoated (NT1) or coated (50/50 wt%) with acid-based (NT2) or polystyrene-based (NT3) polymer, and exposed murine macrophages (RAW 264.7 cell line) or Balb/c mice by intratracheal administration. Biological experiments were performed both in vitro and in vivo, examining time- and dose-dependent effects of CNT, in terms of cytotoxicity, expression of genes and proteins related to oxidative stress, inflammation and tissue remodeling, cell and lung tissue morphology (optical and transmission electron microscopy), and bronchoalveolar lavage fluid content analysis.     

Nickel-free manganese bearing stainless steel in alkaline media—Electrochemistry and surface chemistry

The use of austenitic nickel-containing stainless steels as concrete reinforcement offers excellent corrosion protection for concrete structures in harsh chloride bearing environments but is often limited due to the very high costs of these materials. Manganese bearing nickel-free stainless steels can be a cost-effective alternative for corrosion resistant reinforcements. Little, however, is known about the electrochemistry and even less on surface chemistry of these materials in alkaline media simulating concrete pore solutions. In this work a combined electrochemical (ocp = open circuit potential) and XPS (X-ray photoelectron spectroscopy) surface analytical investigation on the austenitic manganese bearing DIN 1.4456 (X8CrMnMoN18-18-2) stainless steel immersed into 0.1 M NaOH and more complex alkaline concrete pore solutions was performed. The results show that the passive film composition changes with immersion time, being progressively enriched in chromium oxy-hydroxide becoming similar to the conventional nickel-containing stainless steels. The composition of the metal interface beneath the passive film is strongly depleted in manganese and enriched in iron; chromium has nearly the nominal composition. The results are discussed regarding the film growth mechanism (ageing) of the new nickel-free stainless steel in alkaline solutions compared to traditional austenitic steels. Combining the results from pitting potential measurements with the composition of the passive film and the underlying metal interface, it can be concluded that the resistance against localized corrosion of the new nickel-free stainless steel relies on the strong chromium(III) and molybdenum (VI) oxy-hydroxide enrichment in the passive film.     

Screening of Soluble Rhodium Nanoparticles as Precursor for Highly Active Hydrogenation Catalysts: The Effect of the Stabilizing Agents

We report the preparation of rhodium nanoparticles (NPs) stabilized by 1-octadecanethiol (ODT), polyvinyl alcohol (PVA), and tetraoctylammonium bromide (TOAB), and their application for hydrogenation catalysis. The three metal–ligand systems correspond to different mechanism of NPs stabilization via strong covalent linkage, chemisorbed atoms and electrostatic interactions, respectively. We found a strong effect of the interaction between the stabilizer and the surface of the metal nanoparticle on the catalytic activity. The Rh NPs were studied as soluble nanoparticle catalysts and as precursors for the synthesis of supported catalysts. All catalysts were tested in the hydrogenation of cyclohexene under similar conditions as a model reaction. Generally, Rh–ODT NPs were inactive, Rh–PVA NPs exhibited distinct activities in solution (aqueous biphasic catalysis) and as a supported catalyst, and Rh–TOAB NPs exhibited similar activities in solution and after immobilization. This last result opens the opportunity for the preparation of highly active Rh NP catalysts both in solution and as a heterogeneous catalyst. Additionally, the stability of the nanoparticles depends on the choice of ligand and on the functionalization of the support surface before immobilization. By optimizing the catalyst synthesis and reaction conditions, turnover frequencies as high as 700,000 h^?1 where observed for stable and recyclable catalyst.