Gravure printing for thin film ceramics manufacturing from nanoparticles

Printing technologies can offer high potential for the thin film deposition of functional materials. Among the printing techniques, the gravure is considered one of the most promising, although to date it is still little employed, especially for the inorganic functional materials. In this work, the study of the gravure printing process for the metal oxides thin film production on flexible polymer substrate is reported. For this purpose, zinc oxide (ZnO) was chosen due to its versatile properties and nanosize effects, which make it suitable for many high technology areas. The gravure printing was made using low viscosity inks of ZnO nanoparticles. The characteristics of the printed thin films were examined and discussed. Thanks to the understanding of the physics underlying the film forming during the printing process combined to the knowledge on such specific material, uniform, compact, very transparent and smooth films were obtained in different nanometric thicknesses. Moreover, the possibility of fabricating ceramic nanocomposite films directly through this printing technique is also presented. Thanks to its scientific approach, this work makes available to the world of ceramics an industrial versatile and low-cost production technique which can allow to study and develop high-quality thin film ceramics with technologically interesting properties as well as nanoparticles behavior and their treatments in order to develop and use their fascinating nanosize properties.     

Progress Towards an Acoustic Measurement of the Molar Gas Constant at INRIM

Progress in developing an experiment for the determination of the molar gas constant R and the Boltzmann constant k at INRIM is reported. The experiment involves simultaneous measurements of the acoustic and microwave resonance frequencies of a stainless steel spherical resonator for which its hemispheres were deliberately misaligned. For the present work, these frequencies were measured in helium near 273.16 K, in the pressure range from 100 to 800 kPa. From microwave data, the radius of the resonator was determined as a function of pressure with an estimated uncertainty of 6.0 ppm. Using acoustic data and the microwave determination of the resonator radius, the speed of sound in helium was deduced, and these values were compared with those predicted by recent accurate ab initio calculations. Over most of the pressure range, the present values agreed with the ab initio values within the uncertainty of the measurements (standard uncertainty of approximately 7.0 ppm). Many suggestions for reducing the uncertainty are provided.     

Sentinel node localization in breast cancer

The immutans (im) mutant of Arabidopsis shows a variegated phenotype comprising albino and green somatic sectors. We have cloned the IM gene by transposon tagging and show that even stable null alleles give rise to a variegated phenotype. The gene product has amino acid similarity to the mitochondrial alternative oxidase. We show that the IM protein is synthesized as a precursor polypeptide that is imported into chloroplasts and inserted into the thylakoid membrane. The albino sectors of im plants contain reduced levels of carotenoids and increased levels of the carotenoid precursor phytoene. The data presented here are consistent with a role for the IM protein as a cofactor for carotenoid desaturation. The suggested terminal oxidase function of IM appears to be essential to prevent photooxidative damage during early steps of chloroplast formation. We propose a model in which IM function is linked to phytoene desaturation and, possibly, to the respiratory activity of the chloroplast.     

Speed of Sound in Pure Water at Temperatures between 274 and 394 K and at Pressures up to 90 MPa

A newly designed experimental apparatus has been used to measure the speed of sound u in high-purity water on nine isotherms between 274 and 394 K and at pressures up to 90 MPa. The measurement technique is based on a traditional double-reflector pulse-echo method with a single piezoceramic transducer placed at unequal distances from two stainless steel reflectors. The transit times of an acoustic pulse are measured at a high sampling rate by a digital oscilloscope. The distances between the transducer and the reflectors were obtained at ambient temperature and pressure by direct measurements with a coordinate measuring machine. The speeds of sound are subject to an overall estimated uncertainty of 0.05 %. The acoustic data were combined with available values of density ρ and isobaric heat capacity c_p along one isobar at atmospheric pressure to calculate the same quantities over the whole temperature and pressure range by means of a numerical integration technique. These results were compared with those calculated from the IAPWS-95 formulation with corresponding relative deviations which are within 0.1%. Paper presented at the Fifteenth Symposium on Thermophysical Properties, June 22–27, 2003, Boulder, Colorado, U.S.A.     

Improving the gravure printed PEDOT:PSS electrode by gravure printing DMSO post-treatment

The poly(3,4ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) is one of the most attractive conducting polymers proposed as electrode for flexible electronics. Promising methods for enhancing its low conductivity, main limit for its use, are based on post-treatment. However, most of them are not suitable for mass production. In this study, the gravure printing technique was tried for the post-treatment of the PEDOT layer using dimethylsulfoxide (DMSO), as practical, safe and cost effective process for improving the printed electrode. An increase of the conductivity of the printed PEDOT:PSS layer was found and attributed to the rearrangement of the polymeric chains that leads to the formation of PEDOT-rich regions improving the conducting pathways. In addition, smoother film surface and improved stability to the humidity were obtained, representing further advantages for its employment in plastic electronics. Therefore, the feasibility and the efficacy of the DMSO post-treatment of the PEDOT:PSS films by gravure printing were demonstrated, showing the way for the low cost all in-line industrial production of large area PEDOT:PSS electrodes.     

Hydraulic Design and Preliminary Performance Evaluation of Countermeasure against Debris Accumulation and Resulting Local Pier Scour on River Po in Italy

This paper presents a protection structure built for a bridge pier consisting of six narrow piles. Accumulation of large woody debris upstream of the pile group during high-flow terms might have induced much larger scour depths compared with those expected for the single pile. A phenomenological sketch of the system suggested that accumulation of debris material during peak flows and subsequent descent of the same material during the tail of the events represented a very dangerous two-stage process owing to the high expected scour. Consequently, a countermeasure was designed, consisting of a plate preventing the descent of debris below its elevation. The performance of the plate in reducing local scour was subjected to some preliminary laboratory tests, and satisfactory results were obtained. This paper reports some tentative performance observations for the real structure built on the river, based on the amount of debris trapped during a recent event with moderate flow.     

Accurate Analysis of Planar Microstrip Antenna Array

For the microstrip patch resonator, as a planar antenna of a microstrip, a set of equations that represents the electromagnetic fields in the x and z direction as function of the electric field in the y direction are obtained applying the TTL method. This method is very suitable at microwave and antenna applications, and gives accurate complex resonant frequency, which contributes definitively to obtain higher precision antenna parameters. For each type of array is calculated the array factor, considering the excitation, phase and the relative displacement between the elements as well as the dimensions and number of elements.     

Reliability Improvement for Simplex Communication Systems with Multiple Channels

The reliability of a communication system can be improved by using channel coding. Complex coding and decoding are often required to achieve high performance. An alternative approach is channel redundancy in which the same information is transmitted over two or more channels at the same time. In this way, the coding complexity required to achieve a given error probability can be appreciably reduced. However, a decoder is required for each channel. This paper describes a method which uses channel redundancy to obtain higher performance compared to similar systems and requires only one channel decoder.     

Ultra-wideband detect and avoid procedure for WiMAX victims

Detect and avoid (DAA) procedures aim at improving ultra-wideband (UWB) coexistence with existing narrowband/wideband licenced/unlicenced victim terminals operating in the same band at the same time and area. The authors propose a DAA procedure that can be used to reduce the percentage of time the UWB interferes with victims operating in a time division duplexing (TDD) mode. The authors consider a system scenario where a TDD terminal has a primary role and UWB devices create a secondary network on a local area basis. A DAA procedure is implemented only in the UWB devices that adapt their transmissions in order to avoid or reduce interference on primary device(s) in the same area. The performance of the proposed DAA procedure is presented and discussed and its dependence on some key UWB transmission parameters, bit rate and the emitted power is evidenced. It is shown that the DAA timeout parameters can be tuned so as to arbitrarily reduce the average percentage of time the UWB interferes with the considered victim systems even well below the limits imposed by regulatory bodies. It is shown that interference reduction is obtained at the expense of reduced performance of the UWB transmission. The proper selection of DAA timeouts for a desired percentage of UWB interference and UWB link efficiency is discussed.     

Toxic elements at a disused mine district: Particle size distribution and total concentration in stream sediments and mine tailings

Heavy metal and metalloid pollution at a disused pyrite mine was investigated. Five solid samples collected in the area (three stream sediments with different soil texture, a background soil sample and a mine tailing) were characterised by mineral and element composition, particle size distribution (by wet and dry sieving and laser diffraction) and total concentration by acid digestion (Mn, Zn, Cu, Pb, Hg, Cd, Sb and As). X-ray and element analyses denoted a common mineralogical and chemical composition of mainly quartz, clinochlore, muscovite, anorthite, and hematite. Particle size distributions of the five samples showed that stream sediments were characterised by larger percentage of sand range classes (2000-60 microm) while background sample and tailing are mainly characterised by gravel particles (>2000 microm). Wet and dry sieving procedures gave different particle size distributions, which can be interpreted by laser diffraction analysis and represented by Rosin-Rammler model. Concentrations of Zn, Cu and Cd were higher in the stream sediments than the tailing and background soil, while Mn, As, Sb and Hg are mainly concentrated in the tailing sample. Metal concentrations in the three stream sediment samples are correlated with both particle size dimensions (D(63.2)) and concentration of geochemical normalizers (iron and aluminium). These correlations are observed also for the pollutants that are mainly concentrated in tailing sample (Mn and As), denoting the importance of surface interactions also for the binding of these elements onto stream sediments.