Astringency sub-qualities of red wines and the influence of wine–saliva aggregates

Astringency is a sensory attribute, related to the quality and mouthfeel of red wines. However, the origin of astringency sub-qualities, such as the typical drying astringency found in immature grapes, is still unknown. Astringency of red wines with similar tannin content but different astringency sub-qualities, from different harvest dates, is studied. Astringency was characterised in terms of friction coefficient, polyphenol content, sensory analysis and tannin/salivary–proteins aggregates characterisation. A different evolution during ripening was found for both Cabernet Sauvignon and Carménère, and tannin–protein aggregates showed differences in size, shape and surface. The velvety sub-quality appears to be related to aggregates with low precipitation, and with specific surface characteristics as roundness and Feret diameter. Results from this work propose an effect of aggregates on sensory perception and opens the possibility to explore their effect on oral lubrication.     

Applicability of electrical resistance tomography to the analysis of fluid distribution in haemodialysis modules

This work aims to explore the applicability of electrical resistance tomography (ERT) in the analysis of fluid distribution in haemodialysis modules, which is not straightforward due to the complex geometry of the hollow fibre bundles and the small sizes of the modules. On the other hand, ERT is potentially a suitable and convenient technique for investigation in this field due to its cost-effectiveness and capacity to perform measurements in opaque systems. After a preliminary estimation of the fibre bundle local distribution, the assessment of the technique is performed by observing the time evolution of the measured conductivity maps during the module filling and emptying operations with water and air, which are alternatively fed inside or outside the fibre bundle. Reliable conductivity maps are obtained by placing the module vertically or horizontally. Additional experimental data collected by feeding liquid mixtures of different sodium chloride concentrations show that the technique is suitable for detecting concentration variations, due to the mass transfer through the fibres, and flow maldistribution, due to the specific geometry of the module. From the preliminary results collected in this work, the technique appears to be adequate for the collection of data that can support the optimization of the module geometry and computational model validation.     

Detailed Insight into the Interaction of Bicyclic Somatostatin Analogue with Cu(II) Ions

Somatostatin analogues are useful pharmaceuticals in peptide receptor radionuclide therapy. In previous studies, we analyzed a new bicyclic somatostatin analogue (BCS) in connection with Cu(II) ions. Two characteristic sites were present in the peptide chain: the receptor- and the metal-binding site. We have already shown that this ligand can form very stable imidazole complexes with the metal ion. In this work, our aim was to characterize the intramolecular interaction that occurs in the peptide molecule. Therefore, we analyzed the coordination abilities of two cyclic ligands, i.e., P1 only with the metal binding site and P2 with both sites, but without the disulfide bond. Furthermore, we used magnetic circular dichroism (MCD) spectroscopy to better understand the coordination process. We applied this method to analyze spectra of P1, P2, and BCS, which we have described previously. Additionally, we analyzed the MCD spectra of P3 ligand, which has only the receptor binding site in its structure. We have unequivocally shown that the presence of the Phe-Trp-Lys-Thr motif and the disulfide bond significantly increases the metal binding efficiency.     

A new test cell for the evaluation of thermo-physical performance of facades building components

How do the new building façade components work under real climatic conditions? The question is especially related to the dynamic behaviour of new and complex components such as the ventilated walls, the Phase Change Material, or others that use nano-technologies and aerogels. One of the objectives of the undergoing research activity, named Abitare Mediterraneo, is the evaluation of their thermal behaviour through the use of an outdoor test cell, in order to reproduce under the real external conditions the performance of these components, and consequently define the main thermal parameters such as the attenuation factor and the thermal inertia, characterising the component; moreover, the results will be used to write new algorithms for dynamic simulation tools allowing an appropriate evaluation of the complex behaviour of the whole building at a real scale condition. The new test cell is realised in Florence, Italy. The design starts from the study of the experience of the existing PASSYS test cells, overtaking the main weakness of the building structure and of the heat-flux sensors.     

Conjugation of amino-bioactive glasses with 5-aminofluorescein as probe molecule for the development of pH sensitive stimuli-responsive biomaterials

Bioceramics, such as silica-based glasses, are widely used in bone and teeth restoration. Nowadays, the association between nanotechnology and pharmacology is one of the most promising research fields in cancer therapy. The advanced processing methods and new chemical strategies allow the incorporation of drugs within them or on their functionalized surfaces. Bioceramics can act as local drug delivery systems to treat bone and teeth diseases. The present paper reports data related to the development of a pH-stimuli responsive bioactive glass. The glass conjugation with 5-aminofluorescein (5-AF), through a pH-sensitive organic spacer, allows to produce a pH-responsive bioactive biomaterial: when it is exposed to specific pH changes, it can favour the release of 5-AF directly at the target site. 5-AF has been chosen as a simple, low cost, non toxic model to simulate doxorubicin, an anticancer drug. As doxorubicin, 5-AF contains an amino group in its structure in order to form an amide bond with the carboxylic functionalities of the glass. Raman spectroscopy and thermal analysis confirm the glass conjugation of 5-AF by means of an amide bond; the amount of 5-AF loaded was very high (≈65 and 44 wt%). The release tests at two different pH (4.2 and 7.4) show that the amount of released 5-AF is higher at acid pH with respect to physiological one. This preliminary datum evidenced that a pH-sensitive drug delivery system has been developed. The low amount of 5-AF released (<1 wt% of the total 5-AF) is due to the very low solubility of 5-AF in aqueous medium. This disadvantage, may be overcome in a dynamic environment (physiological conditions), where it is possible to obtain a drug release system ensuring an effective therapeutic dose for long times and, at the same time, avoiding the drug toxicity.     

Integrating urban and port planning policies in a sustainable perspective: the case study of Naples historic harbour area

ABSTRACT

This paper explores the case of the historic harbour area of Naples, considered highly significant, due to its physical and cultural characteristics, with the aim of reflecting on the contemporary need for building renewed and synergic city–port relations in a sustainable perspective. Focusing on the physical and functional city–port integration, the study investigates Naples harbour planning policy between twentieth and twenty-first centuries in order to identify the limitations of older instruments and to exam the current proposal, finally suggesting perspectives for the future. The analysis highlights the fact that, in the port of Naples, with a landlord governance, the main obstacles to a more inclusive planning policy have been related to land use conflict between on one hand the public interest of the Port Authority and Municipality and the private interest of port operators on the other. In conclusion, the need for city–port plan integration is outlined as a central planning issue so as to combine the economic development of the harbour with social, cultural and ecological themes and to overcome the conflicts between the different actors involved in the complex planning process.     

Antioxidant Activity of γ-Oryzanol: A Complex Network of Interactions

γ-oryzanol (Orz), a steryl ferulate extracted from rice bran layer, exerts a wide spectrum of biological activities. In addition to its antioxidant activity, Orz is often associated with cholesterol-lowering, anti-inflammatory, anti-cancer and anti-diabetic effects. In recent years, the usefulness of Orz has been studied for the treatment of metabolic diseases, as it acts to ameliorate insulin activity, cholesterol metabolism, and associated chronic inflammation. Previous studies have shown the direct action of Orz when downregulating the expression of genes that encode proteins related to adiposity (CCAAT/enhancer binding proteins (C/EBPs)), inflammatory responses (nuclear factor kappa-B (NF-κB)), and metabolic syndrome (peroxisome proliferator-activated receptors (PPARs)). It is likely that this wide range of beneficial activities results from a complex network of interactions and signals triggered, and/or inhibited by its antioxidant properties. This review focuses on the significance of Orz in metabolic disorders, which feature remarkable oxidative imbalance, such as impaired glucose metabolism, obesity, and inflammation.     

Ignition mechanism of flammable dust and dust mixtures: An insight through thermogravimetric/differential scanning calorimetry analysis

Understanding flame propagation mechanism and thermal behavior of flammable dusts is of crucial importance, since they strongly affect the flammability and explosion parameters. In a previous work, we found that the volatile point of anthraquinone/nicotinic acid mixtures can be lower than the one of the pure dusts, suggesting a synergistic effect. In this work, thermogravimetric and differential scanning calorimetry analyses of anthraquinone/niacin mixtures were carried out both in open and closed cup, to explain the observed synergistic behavior. FTIR analysis on solid residue and evolved gaseous species showed that the mixtures change compositions during the thermal treatment, without undergoing any chemical transformation. The thermal behavior of dust mixtures reveals the presence of a eutectic point, resulting in a volatiles production at lower temperature and accelerating the flame propagation.     

Evaluation of tritium diffusion through the Neutral Beam Injector calorimeter panel

The Neutral Beam Test Facility (NBTF) to be realized in Padoa will test the Neutral Beam Injection (NBI), one of the Heating and Current Drive Systems foreseen for ITER. The NBI is based on the acceleration of hydrogen or deuterium negative ions up to 1 MeV. This work has been aimed at assessing the tritium release from the NBTF in order to provide data for the safety analysis. In particular, the diffusion of the tritium through the neutral beam target material (the CuCrZr alloy calorimeter panels) has been assessed by using literature data of the diffusion coefficient. The tritium generated inside the calorimeter panels moves into both the vacuum and water side: the tritium diffusion flux has been evaluated during the beam-on (200 °C) and the beam-off (20 °C) phases of the NBTF experiments consisting of an interim campaign and a final test. The penetration depth of the tritium through the 2 mm thick CuCrZr alloy material has been also evaluated by using a Monte-Carlo code. As main result, the assessed diffusion flux of tritium during both the beam-on and the beam-off phases are modest. In fact, at the end of the interim campaign (100 days), about the 96% of the all generated tritium (626.5 MBq) exits the calorimeter while the residual tritium inventory (25 MBq) leaves the copper alloy with a diffusion time of about 1 month. At the end of the final test (14 days) about the 99% of the total generated tritium (1.023 × 10⁴ MBq) leaves the copper alloy and the remaining tritium inventory (152.2 MBq) is released by about 32 days. In both the interim campaign and the final test, more than the 99% of the total tritium is transferred into the vacuum side of the calorimeter panel while negligible tritium amounts enter the cooling water system thus showing a very low impact on the environment.     

Characterisation of Italian commercial apricot juices by high-performance liquid chromatography analysis and multivariate analysis

The modern fruit juice industry needs their products to be characterized by high-quality attributes to meet consumers’ expectation. In this view, the composition of 26 Italian commercial apricot juices obtained from organic, integrated and conventional agriculture was analysed for carbohydrates, organic acids, amino acids, phenolic compounds and furanic compounds by high-performance liquid chromatography (HPLC). The content of 5-hydroxymethylfurfural in apricot juices (range 0.1–18 mg/l) was within the regulatory limit of 20 mg/l. The lack of furanic compounds in apricot fresh fruits confirmed their importance as quality markers of heating condition during processing and storage of fruit juices. Univariate analysis disclosed some significant differences among the composition of the apricot juices in terms of glucose, fructose, malic acid, glycine, chlorogenic acid, rutin, and a^∗-parameter (redness). Principal component analysis on chemical composition of apricot juices resulted in two principal components (PCs) that accounted for 66% of the total variance. Organic apricot juices showed some separation from the other juices, whereas a lack of distinction between integrated and conventional juices appeared.