Impurity ‘Hot Spots’ in MBE HgCdTe/CdZnTe

In this work, impurity ‘hot spot’ macro-defects—high impurity level macro-defect contaminates were examined. ‘Hot spots’ have very high localized concentrations of: K, Mg, Ni, Cr, Mn, Ca, Al, Na, Fe, and Cu. For example, these ‘hot spot’ macro-defects can have Cu concentrations >?1?×?10¹⁸ cm^?3. Focused ion beam scanning transmission electron microscopy analysis of four ‘hot spots’ was performed. The origin of ‘hot spot’ defects is unresolved—however, our analysis has shown ‘hot spots’ can arise due to molecular beam epitaxy spit defects and CdZnTe substrate defects. The estimated ‘hot spot’ density is ～?30 cm^?2. The presence of impurity ‘hot spot’ macro-defects in HgCdTe/CdZnTe is confirming evidence for the occurrence of L. Bubulac’s impurity ‘pipe’ mechanism.     

Surface modification technique to enhance metallurgical and mechanical properties of alloy C-276 weldment by laser shock peening without coating

Microsegregation of alloying elements is prone to hot cracking in the weldment of alloy C-276. The formation of topologically close packed phases P and µ is largely responsible for the hot cracking. The present study articulates the effect of laser shock peening (LSP) to improve the metallurgical and mechanical properties of the weld joint. The weld joint was fabricated by pulsed current gas tungsten arc welding (PCGTAW) using an ERNiCrMo-3 filler wire. LSP without coating was carried out on the cap surface of the weldment. Microstructural studies were carried out to compare the as-welded and laser-peened microstructure on the fusion zone. The results show that a fine equiaxed dendritic structure was observed in both conditions. EDS analysis was carried out to evaluate the microsegregation of alloying elements. EDS analysis indicates that there are no secondary intermetallic phases. X-ray diffraction analysis was carried out to evaluate the phase change and crystallite size in the as-welded and laser shock peened fusion zone. The result shows 48.99% reduction in crystallite size after LSP. Hardness and tensile strength results indicate there is a consequential increase in laser shock peened specimen compared with as-welded specimen.     

Pluronic lecithin organogel of 5-aminosalicylic acid for wound healing

5-Aminosalicylic acid (5-ASA) is an aminosalicylate anti-inflammatory drug, which is also known as mesalazine or mesalamine. Currently employed in treating inflammatory bowel disease, ulcerative colitis, inflamed anus or rectum, and maintain remission in Crohn's disease. Evidence from the researchers highlighted its significant re-epithelization in allergic asthma, aphthous, and gastric ulcerative conditions. The objective of the study was to formulate the pluronic lecithin organogel (PLO) containing 5-ASA and evaluate its wound-healing ability in a full thickness excision wound rat model. The data obtained from in silico docking studies revealed 5-ASA is having an affinity towards the transforming growth factor-beta (TGF-β) specifically towards beta1. Among various formulations prepared (F1 to F8), F1, and F6 have shown a maximum in vitro drug release with optimum pH and viscosity. From MTT assay it was found that selected PLO formulations showed no toxicity and enhanced cell proliferation in HaCaT cell lines. In vivo wound-healing studies in albino Wistar rats has revealed that PLO accelerates wound closure and reepithelization to the statistically significant level on day 3 (p?相似文献   

Students’ affective content analysis in smart classroom environment using deep learning techniques

Multimedia Tools and Applications - In the era of the smart classroom environment, students’ affective content analysis plays a vital role as it helps to foster the affective states that are...     

Influence of Grain Boundary Complexion on Deformation Mechanism of High Temperature Bending Creep Process of Cu Bicrystal

Despite of substantial advancement, the effect of grain boundary (GB) complexions on high temperature creep deformation process has not been fully understood. In this paper, we have studied the high temperature bending creep deformation of copper bicrystal with various GB complexions under different loads using molecular dynamics simulation. It has been found that specimen with normal kite GB complexion have better creep resistance properties when subjected to comparatively lower applied load. In case of monolayer Zr segregation, a drastic decrease in creep strength as well as creep plasticity is observed due to inhibition of GB migration. On the other hand, deviation between creep properties for specimen with split-kite GB complexion and split-kite bilayer Zr segregation GB complexion is minimal. Enhanced creep plasticity is observed in case of split-kite bilayer Zr segregation GB complexion, which is due to formation of interpenetrating icosahedral clusters in the necking region. Fracture in specimen with monolayer Zr segregation GB complexion has occurred by means of slip phenomenon at lower deformation load whereas amorphization and necking is observed at higher deformation load. In case of specimen with bilayer Zr segregation GB complexion, it is found that fracture has occurred through amorphization and necking at all deformation loads due to higher GB thickness.     

Texture Image Classification Using Deep Neural Network and Binary Dragon Fly Optimization with a Novel Fitness Function

Wireless Personal Communications - Texture is one of the most significant characteristics of an image for retrieving visually similar patterns. So far, researchers utilize large number of gray...     

Texture homogeneity and stability in severely warm-rolled and annealed ultrafine pearlite

The evolution of microstructure and texture was investigated in a severely warm-rolled ultrafine pearlitic steel. The steel was 95% warm-rolled at 600°C and annealed at 700°C for different time intervals. The spheroidisation of cementite initiated after 30% reduction and completed beyond 70% reduction. The 95% warm-rolled steel showed elongated as well as ultrafine equiaxed ferrite grains. Texture inhomogeneities were evidenced by the presence of Goss component ({011} <100>) on the surface originating due to surface shear and diffuse texture at the interior. Formation of equiaxed microstructure after annealing through continuous recrystallisation resulted in the retention of the surface Goss component. However, the Goss component was destroyed beyond annealing for 180?minutes due to the abnormal growth of other grains.     

Binary whale optimization algorithm: a new metaheuristic approach for profit-based unit commitment problems in competitive electricity markets

This article presents a metaheuristic approach, the binary whale optimization algorithm (BWOA), to solve complex, constrained, non-convex, binary-nature profit-based unit commitment (PBUC) optimization problems of a price-taking generation company (GenCo) in the electricity market. To simulate the binary-nature PBUC problem, the continuous, real-value whale position/location is mapped into binary search space through various transfer functions. This article introduces three variants of BWOA using tangential hyperbolic, inverse tangent (arctan) and sigmoidal transfer functions. The effectiveness of the BWOA approaches is examined in test systems with different market mechanisms, i.e. an energy-only market, and energy and reserve market participation with different reserve payment methods. The simulation results are presented, discussed and compared with other existing approaches. The convergence characteristics, solution quality and consistency of the results across different BWOA variants are discussed. The superiority and statistical significance of the proposed approaches with respect to existing approaches is also presented.     

Future technology challenges in distributed interactive simulation

The paper examines the changes in computer and communications capabilities over the next 10-15 years which are most likely to affect the central components of distributed interactive simulation (DIS): manned simulators, synthetic environments, and semi-automated forces (SAF). Because these components of DIS are currently very resource intensive, improvements in computer and communications capabilities translate into direct and immediate improvements in DIS capabilities. These improved capabilities in turn allow DIS to contribute in much broader arenas, enhancing troop readiness and reducing system acquisition costs. These improvements will not all come automatically, however. Substantial planning is required to ensure that DIS can take advantage of the coming changes, rather than being overcome by them     

Fundamental Limitations of Continuous-Time Delta–Sigma Modulators Due to Clock Jitter

We examine noise due to clock jitter in single-loop low-pass continuous-time delta-sigma (Delta Sigma) modulators (CT-DSMs) employing nonreturn to zero (NRZ) feedback digital-to-analog converters (DACs). Using the discrete-time version of the Bode sensitivity integral, we derive a lower bound on jitter noise and its relationship to the noise transfer function (NTF) of the modulator. We show that NTFs with optimized zeros result in lower jitter noise than those with all zeros at the origin. We give intuition to a recent observation (arrived through numerical optimization) that NTFs with peaking in their passbands have lower jitter noise than maximally flat NTFs. We propose a design procedure that minimizes the sum of the quantization and jitter noise. The arguments regarding Delta Sigma analog-to-digital converters are extended to Delta Sigma DACs and measurement results are presented.