The capacity of multi‐channel multi‐interface wireless networks with multi‐packet reception and directional antenna

The capacity of wireless networks can be improved by the use of multi‐channel multi‐interface (MCMI), multi‐packet reception (MPR), and directional antenna (DA). MCMI can provide the concurrent transmission in different channels for each node with multiple interfaces; MPR offers an increased number of concurrent transmissions on the same channel; DA can be more effective than omni‐DA by reducing interference and increasing spatial reuse. This paper explores the capacity of wireless networks that integrate MCMI, MPR, and DA technologies. Unlike some previous research, which only employed one or two of the aforementioned technologies to improve the capacity of networks, this research captures the capacity bound of the networks with all the aforementioned technologies in arbitrary and random wireless networks. The research shows that such three‐technology networks can achieve at most capacity gain in arbitrary networks and capacity gain in random networks compared with MCMI wireless networks without DA and MPR. The paper also explored and analyzed the impact on the network capacity gain with different , θ, and k‐MPR ability. Copyright © 2012 John Wiley & Sons, Ltd.     

城轨列车超级电容储能系统仿真分析

本文针对城市轨道交通中再生制动能量吸收系统展开了研究。文中主要探讨了超级电容储能系统的控制策略,针对系统的储能模式进行了建模与仿真,定性分析了仿真结果,提出了安全可靠的控制策略,对城轨列车超级电容储能系统的实际应用具有一定的指导和借鉴意义。     

血管介入手术器械运动控制系统

医学教育是非常重视实践操作的,没有临床实践就不能培养出合格的医生。现代医学人才培养的瓶颈之一就是学生被迫远离了临床真实环境下的操作练习,特别是血管内介入治疗这种要求高精确度的手术技术。为了配合用于介入手术培训的血管介入手术模拟教学系统,自主开发了一套血管介入手术器械运动控制系统。该系统能够将介入手术器械导丝的位移信号发送给上位机,准确描述上位机软件系统中虚拟导丝的位移,实现同步运动。同时导丝受力反馈装置的设计能够模拟导丝在血管中运动时遇到的阻力,提供良好的手感,达到真实医学培训目的。     

Performance analysis of uplink spatial multiplexing MIMO MT‐CDMA over multipath fading channels

In this paper, we consider multiple‐input multiple‐output (MIMO) multi‐tone code division multiple access (MT‐CDMA) uplink transmission over multipath fading channels. The zero‐forcing vertical Bell Laboratories layered space‐time architecture (ZF V‐BLAST) algorithm and maximum ratio combining scheme are applied at the receiver. The average bit error rate (BER) expression is derived provided that the number of receive antennas is not less than that of transmit antennas. The BER expression is verified by simulations. Numerical results show that the numbers of transmit and receive antennas have significant effects on the BER performance of the considered system. Spatial and path diversity show different capabilities to improve the BER performance. The MIMO MT‐CDMA system based on the ZF V‐BLAST algorithm is capable of achieving a better BER performance and a higher capacity than the conventional MT‐CDMA system. Copyright © 2011 John Wiley & Sons, Ltd.     

New Signature Waveforms for Multi-rate QS-CDMA System with QPSK Modulation

This paper presents a multi-rate quasi-synchronous CDMA (QS-CDMA) system with QPSK modulation based on the new signature waveforms, namely GPZ-chip waveforms which are constructed by the generalized pairwise Z-complementary (GPZ) codes and optimal chip waveforms. According to the properties of GPZ-chip waveforms, the multiple access interference of different users can be reduced or eliminated. The interferences among different streams of the same user are handled by an optimal (or suboptimal) multi-stream detector(s). The performance of the proposed system is simulated and analyzed in a cellular communication environment consisting of multipath fading. The result shows that the proposed system has similar performance as compared to the single-rate QS-CDMA system employing GPZ codes with one chip waveform due to the properties of multi-stream detection. Also, the proposed system can achieve a significant interference reduction as compared to the multi-rate system employing concatenated WH/m sequence sets with one chip waveform due to the zero correlation zone properties of the GPZ-chip waveforms, thus resulting better BER performance.     

具有多种输出模式微弧氧化电源的研制

基于对微弧氧化工艺和负载特性的研究,提出一种新的带放电回路脉冲模式。并在此基础上研制了一种以80C196KB单片机为控制系统核心,具有多种输出模式的微弧氧化电源。通过对主电路结构的拓扑及对可控硅触发和IGBT驱动的控制,该电源能够产生带放电回路脉冲、单极性脉冲和双极性脉;中3种输出模式,而且其脉冲幅值、频率、占空比具有很宽的调节范围。此外还实现了对微弧氧化过程中电流和电压的实时采集和显示。经实践表明,该电源能很好地应用于实验研究及工业化生产。     

RIP路由器的开发

本文叙述了在有线电视网、计算机网和电话网三网合一之系统环境中,开发RIP路由器的基本原理、软件实现技术和数据结构,并对所用的Winsock1.1做了相应介绍.     

数字信号处理器芯片新进展

数字信号处理器(DSP)芯片及其应用近年来得到了飞速发展.简单地介绍了这一领域的领头羊德州仪器(TI)公司和模拟设备(AD)公司的几代DSP芯片的性能,重点比较了两公司市场上具有最高性能的浮点DSP产品:TI 的TMSC6701和AD 的ADSP-21160.     

逆层析彩虹全息光路参数与色差分析

本文应用横向面积分割和非相干多次曝光相结合的方法在一幅合成彩虹全息图上记录 10～ 6 0片CT平面断层图象 ,并提出了各层再现像亮度均匀、颜色相近的光路设计方法。本文还对白光再现像的色差进行了讨论。     

基于非对称形变的全光纤宽阻滞滤波器的制作

本文提出的基于长周期光纤光栅（LPFG）的全光纤宽阻带滤波器的制做方法，基本原理是在光纤纤芯中引入周期性的非对称形变，从而使光纤纤芯的折射率发生周期性变化；提出了两种实现光纤纤芯非对称形变的方法，进而制做出阻带中心波长分别为1310nm和1550nm的全光纤宽阻带滤波器插入损耗分别小于0.8dB和1.4dB，后向反射损耗小于-70dB。这样的器件可用于提高WDM系统的隔离度。