Sellmeier dispersion for phase-matched terahertz generation in ZnGeP2

A Sellmeier dispersion of zinc germanium diphosphide (ZnGeP2) crystal has been formulated to determine the phase-matching characteristics of the crystal for the generation of coherent tunable terahertz radiation by difference-frequency mixing techniques. The results computed with the formulated Sellmeier dispersion provide an excellent fit to the experimental data.     

Hardware vs software reliability—A comparative study

High levels of reliability can be predicted and achieved as far as the hardware portions of modern large and complex real-time computer-based control systems are concerned but software is a critical part and plays a vital role in influencing the overall system reliability. This paper presents a comparative study between hardware reliability and software reliability from three definitions: top level, intermediate level and low level based on user's point of view, system designer's point of view and quantitative measurement point of view, respectively. Also discussed is the hardware reliability theory vs software reliability theory on the basis of analysis of malfunctions and prevailing reliability trends.     

Dependability Under Priority Repair Disciplines

We have studied the operational behaviour of a complex system consisting of two classes of units (with standby redundancy in one class) under two repair disciplines, viz., preemptive-resume and preemptive-repeat. Units have constant failure rate, while repair follows general probability distributions. Supplementary variable and Laplace transform techniques have been used to obtain the transient state probabilities for such a system. From these, steady state behaviour of the complex system has been examined.     

Methods for calculating point-to-point congestion in switched communication networks

This paper presents two simple algorithms for computing the point-to-point congestion probability in a switched communication network. Methods are straightforward and can easily be computerized. Examples illustrate the methods.     

Linear and nonlinear optical properties of ZnGeP2 crystal for infrared laser device applications: revisited

Measurement of refractive indices in the spectral bands 9-11 microm and 1.32 microm from a cw CO2 laser and a Q-switched Nd:YAG laser, respectively, is reported in a ZnGeP2 crystal. A new set of Sellmeier dispersion relations has been derived from the measured refractive indices data in this crystal. Second-harmonic generation (SHG) of CO2 laser radiation in this crystal is also reported. It is also seen that the previously reported phase-matching data for others experiments in SHG and optical parametric devices is explained satisfactorily with this new set of Sellmeier dispersion relation.     

Application of Fuzzy Logic to Estimate Flow of Methane for Energy Generation at a Sanitary Landfill

This paper proposes the use of a multicriteria assessment technique to evaluate the methane flow during gas extraction from a sanitary landfill. A number of parameters determine the gas generation and the feasibility for its extraction from a landfill. These parameters form a complex set of information with unknown mathematical interrelationships making potential gas flow evaluations difficult and elusive. In addition, the data available for a particular landfill are very often imprecise, uncertain, or subjective, making it even more difficult to evaluate the potential for gas extraction without conducting pilot tests. The method proposed in this paper uses fuzzy composite programming that allows for the use of imprecise information. A landfill gas potential index has been defined, which can be determined by easily obtainable climatological, geological, and landfill parameters. The landfill gas (LFG) potential index is related to the landfill gas flow using an empirical equation. The LFG potential model was calibrated and verified using data obtained from 61 landfills where gas extraction is being conducted. A sensitivity analysis was done to study the impact of variations in the input data on model output.     

Electroactive Shape Memory Effect of Polyurethane Composites Filled with Carbon Nanotubes and Conducting Polymer

We report the electroactive shape memory composites obtained by shape memory polyurethane block copolymer (PU) and multi-walled carbon nanotubes (MWNTs), and polypyrrole (PPy). An addition of combined MWNTs and PPy contributed to an enhancement in conductivity of PU-MWNTs composites. PU containing 2.5% MWNTs showed better mechanical and thermal properties than other composites, but conductivity was not sufficient for showing the shape memory effect by applying electrical voltages. However, when the composite was lightly coated by PPy (2.5%), its conductivity was the highest than other composites. Such the conductivity of this composite was enough to show electroactive shape recovery by heating above transition temperature of 40-48°C due to melting of polycaprolactone soft segment domain. The good shape recovery of 90-96% could be obtained in the shape recovery test when an electric field of 25 V was applied.     

On Lifetime-Based Node Failure and Stochastic Resilience of Decentralized Peer-to-Peer Networks

To model P2P networks that are commonly faced with high rates of churn and random departure decisions by end-users, this paper investigates the resilience of random graphs to lifetime-based node failure and derives the expected delay before a user is forcefully isolated from the graph and the probability that this occurs within his/her lifetime. Using these metrics, we show that systems with heavy-tailed lifetime distributions are more resilient than those with light-tailed (e.g., exponential) distributions and that for a given average degree, k-regular graphs exhibit the highest level of fault tolerance. As a practical illustration of our results, each user in a system with n = 100 billion peers, 30-minute average lifetime, and 1-minute node-replacement delay can stay connected to the graph with probability 1 - 1/n using only 9 neighbors. This is in contrast to 37 neighbors required under previous modeling efforts. We finish the paper by observing that many P2P networks are almost surely (i.e., with probability 1 - o(1)) connected if they have no isolated nodes and derive a simple model for the probability that a P2P system partitions under churn.     

A Novel Electroless Process for Embedding a Thin Film Resistor on the Benzocyclobutene Dielectric

To realize embedded resistors on multilayer benzocyclobutene (BCB) either on-chip or on-board, a low-cost large format electroless process for deposition of NiP and NiWP thin-film resistors using both low-temperature (25°C) and high-temperature (90°C) baths has been developed. The electroless process exhibits uniform resistor thickness in the submicron range and offers low profile and excellent adhesion to the BCB dielectric layer. The resistor films also act as a seed layer for direct electroplating of copper traces. The NiP alloys can also be tailored to a variable temperature coefficient of resistance (TCR) with different alloy compositions. The electroless process can be adopted in the PCB manufacturing industries with no additional investment. This article is the first report on electroless plated thin film resistors on low loss BCB dielectric.     

Photocatalytic degradation of indigo carmine dye using TiO<Subscript>2</Subscript> impregnated activated carbon

The photocatalytic degradation of indigo carmine dye was studied using hydrothermally prepared TiO₂ impregnated activated carbon (TiO₂: AC). A comparison between the degradation of the indigo carmine dye using commercial TiO₂ and TiO₂: AC revealed the efficiency of the title compound. The degradation reaction was optimized with respect to the dye concentration and catalyst amount. The reduction in the chemical oxygen demand (COD) revealed the mineralization of dye along with colour removal. The active compound like TiO₂ was impregnated onto the activated carbon surface under mild hydrothermal conditions (<250°C, P ∼ 40 bars). The impregnated activated carbon samples were characterized using powder X-ray diffraction (XRD) and scanning electron microscope (SEM).