Ultrasonic air-coupled testing of square-shape CFRP composite rods by means of guided waves

In aerospace industry, one of the most important parts of gliders and motor-gliders is a lightweight longeron reinforcement made of carbon fibre reinforced plastics (CFRP) rods, known as Graphlite SM315 composite. During manufacturing, the rods as constructional elements are glued together in epoxy-filled matrix in order to build the arbitrary spar profile. The defects present in single rods such as breakage of fibres, multiple delaminations due to the lack of bonding between fibres and reduction in density affect essentially the strength and the fail-safety of the overall construction.The aim of the present work is to investigate the effects (transmission, reflection, scattering and mode conversion) of guided waves propagation along a square-shape CFRP rod in the case of contactless excitation/reception and interaction with region of multiple delaminations applying the numerical model and performing experiments.The square-shape CFRP composite rods possessing internal artificial delamination type defects have been investigated by numerical modelling and experiments employing the developed air-coupled technique (pitch-catch set-up) for cases of conventional transmission and advanced back-scattering configurations. Numerical predictions of guided wave interaction with a multiple delamination type defect in a CFRP composite rod have been made and the interaction mechanism explained. It is possible to conclude, that the actual sizes of the internal defects have been clearly detected using reception of the back-scattered waves over the edges of the defective regions only.     

LIBS based spectroscopic analysis and antidiabetic evaluation of a polyherbal formulation

Although plants have long been a major source of medicine, there is renewed interest in studying the phytochemistry and use of herbal formulations. This paper reports spectroscopic analysis using Laser Induced Breakdown Spectroscopy (LIBS) of a polyherbal formulation, whose antidiabetic activity has also been demonstrated on rat models. LIBS analysis revealed the presence of elements such as Na, K, Mg, Ca, H, O and N. The antidiabetic study showed that amongst the four doses studied (50, 100, 150 and 200 mg/kg bw), the dose of 150 mg/kg bw registered the maximum fall in Blood Glucose Level (BGL) in both normal and diabetic (sub and mild) rats in the Glucose Tolerance Test (GTT) study—normal rats (22 %), sub-diabetic (36.6 %) and mild-diabetic (39 %). The dose of 150 mg/kg also showed the maximum fall of 23.7 % and 22 % in BGL during fasting BGL and GTT studies of normal rats, respectively. The formulation also showed significant antioxidant activity assessed using in vitro assays. The study validates for the first time the therapeutic use of an antidiabetic polyherbal formulation.     

Dielectric properties of iron doped calcium copper titanate,CaCu<Subscript>3</Subscript>Ti<Subscript>3.9</Subscript>Fe<Subscript>0.1</Subscript>O<Subscript>12</Subscript> ceramic

Dielectric properties of iron doped CaCu₃Ti₄O₁₂ (CCTO), viz. CaCu₃Ti_3.9Fe_0.1O₁₂ (CCTFO) prepared by a novel semi-wet route have been investigated. X-ray diffraction of powder sintered at 900 °C show formation of single phase solid solution. Energy dispersive X-ray spectroscopy (EDX) confirmed the presence of CuO rich phase at grain boundaries of CCTFO. Nature of dielectric relaxation observed above room temperature is studied using complex plane impedance analysis and modulus spectroscopy. It has been found that out of the two relaxations reported earlier above room temperature, one occurring at lower temperature is due to grainboundaries interfacial polarization.     

Adaptive Congestion Controller for ABR Traffic in ATM Network

One of the imperatives for improving the quality-of-service (QoS) of high-speed networks of next generation is to reduce congestion. Congestion occurs when the resource demand exceeds the capacity of the network. The purpose of this paper is to analyze the performance of Robust Adaptive Congestion Control algorithm for available bit rate traffic in asynchronous transfer mode networks and suggest improvements of the algorithm for better performance and fairness. The results of simulation presented here corroborates the fact that the improved algorithm reduces settling time and cell loss ratio and thus maximizes utilization of the network.     

Sheet gamma TiAl: Status and opportunities

Gamma TiAl alloys have attractive properties such as low density, high-temperature strength, and high modulus, oxidation, and burn resistance. As a result, these alloys have the potential to replace heavier superalloys in aircraft engine components. Gamma TiAl alloys were investigated in the 1950s but were too brittle for thermo-mechanical processing. However, interest in this class of material rekindled with several U.S. aerospace programs: the National Aerospace Plane, the Integrated High Performance Turbine Engine Technology, and Enabling Propulsion Materials/High Speed Civil Transport, as well as German hypersonic technology programs. Intense metallurgical and metal processing research during the last two decades led to significant progress in this area. As a result, gamma TiAl alloys are now available in all conventional product forms: ingots, forgings, extrusions, and sheets. This article reviews the current status of sheet gamma TiAl technology and its future opportunities. For more information, contact Gopal Das, Pratt & Whitney, 400 Main Street, E. Hartford, CT 06108 USA; (860) 557-1413; e-mail gopal.das@pw.utc.com.     

Atomic layer deposition of HfO2 thin films and nanolayered HfO2–Al2O3–Nb2O5 dielectrics

Smooth, 4–6-nm thick hafnium oxide films were grown by atomic layer deposition from HfI₄ or HfCl₄ and H₂O on SiO₂/Si(1 0 0) substrates at 300 °C. Non-uniform films were obtained on hydrogen-terminated Si(1 0 0). The stoichiometry of the films corresponded to that of HfO₂. The films contained small amounts of residual chlorine and iodine. The films deposited on SiO₂/Si(1 0 0) were amorphous, but crystallized upon annealing at 1000 °C. In order to decrease the conductivity, the HfO₂ films were mixed with Al₂O₃, and to increase the capacitance, the films were mixed with Nb₂O₅. The capacitance–voltage curves of the Hf–Al–O mixture films showed hysteresis. The capacitance–voltage curves of HfO₂ films and mixtures of Hf–Al–Nb–O were hysteresis free.     

Modes of Operation and Analysis of a Separately Excited Motor Fed by a Three-Phase Converter with a Freewheeling Diode

Low-speed performance of a three-phase fully controlled converter-fed dc separately excited motor drive can be improved by connecting a freewheeling diode. This paper describes the modes of operation and a method of analysis taking these modes of operation into account. Normalized curves are presented which allow the selection of a suitable value of filter inductor to keep the ripple within permissible values.     

Response of an Unconfined Aquifer Induced by Time Varying Recharge from a Rectangular Basin

An analytical solution is developed to predict spatio-temporal variation of the water table in a 2-D aquifer system which is receiving transient recharge from an overlying basin of rectangular shape. The transient recharge function is approximated by a number of line segments. Application of the solution is demonstrated with the help of an example problem.     

1.55-μm picosecond all-optical switching by using intersubbandabsorption in InGaAs-AlAs-AlAsSb coupled quantum wells

We report on the first all-optical switching operation of intersubband absorption at an optical communication wavelength (~1.55 μm). The 1.55-μm intersubband absorption was achieved by InGaAs-AlAs-AlAsSb coupled quantum wells. A switching operation on an ultrafast signal (equivalent to 1 THz) was successfully demonstrated with a control pulse energy as low as 27 pJ