Computational models of a nano probe tip for static behaviors

It is difficult to predict the measurement bias arising from the compliance of the atomic force microscope (AFM) probe. The issue becomes particularly important in this situation where nanometer uncertainties are sought for measurements with dimensional probes composed of flexible carbon nanotubes mounted on AFM cantilevers. We have developed a finite element model for simulating the mechanical behavior of AFM cantilevers with carbon nanotubes attached. Spring constants of both the nanotube and cantilever in two directions are calculated using the finite element method with known Young's moduli of both silicon and multiwall nanotube as input data. Compliance of the nanotube-attached AFM probe tip may be calculated from the set of spring constants. This paper presents static models that together provide a basis to estimate uncertainties in linewidth measurement using nanotubes. In particular, the interaction between a multiwall nanotube tip and a silicon sample is modeled using the Lennard-Jones theory. Snap-in and snap-out of the probe tip in a scanning mode are calculated by integrating the compliance of the probe and the sample-tip interacting force model. Cantilever and probe tip deflections and points of contact are derived for both horizontal scanning of a plateau and vertically scanning of a wall. The finite element method and the Lennard-Jones model provide a means to analyze the interaction of the probe and sample and measurement uncertainty, including actual deflection and the gap between the probe tip and the measured sample surface.     

A preliminary design and structural analysis of the lifting tools for 40° sector sub-assembly and handling ITER components

The purpose-built, ITER tokamak assembly tools, which are to be provided by Korea, should be designed to meet: the assembly plan, space reservations, safety standards, simple operations, efficient maintenance, and so on. It is very important that the ITER assembly tools are able to lift and transfer ITER components or their sub-assemblies to their assembled position safely. Furthermore, the lifting tools will lift and handle very heavy loads that can be more than 1200 tonnes sometimes. Therefore, the ITER lifting tools must be designed to endure these heavy load conditions with regard to their structural integrity. Also, these designs should be verified through an appropriate method. The preliminary design of the sector lifting tool and associated lifting attachments are introduced in this paper. The sector lifting tool was designed especially to lift and handle various ITER components by adjusting the lifting centre. The structural analysis results using ANSYS are described considering the heaviest load condition. The results of the analysis show that; all stresses applied on the lifting tool are lower than the allowable stress of the applied material.     

Max Penson in Uzbekistan

Photography reached the Ottoman Empire soon after its invention, at about the time that painting began to be practised there as part of a broader project of assimilating aspects of European culture. This was in marked contrast to the situation in Europe, where photography had to contend with visual traditions from which it adopted pictorial conventions and subject matter. Instead of supplanting existing traditions of realistic visual representation, photography in the Ottoman Empire served as a discrete source of inspiration. This paper examines how this inversion of European experience within the Ottoman Empire provides an alternative to dominant narratives of photographic history. If one of the salient characteristics of modernist movements in Western art is their ability to break with tradition, then the adoption of Western practices of representation by artists within the Ottoman Empire may be viewed as a radical modernist success.     

Impact of air‐handling system exhaust failure on dissemination pattern of simulant pathogen particles in a clinical biocontainment unit

Biocontainment units (BCUs) are facilities used to care for patients with highly infectious diseases. However, there is limited guidance on BCU protocols and design. This study presents the first investigation of how HVAC (heating, ventilation, air‐conditioning) operating conditions influence the dissemination of fluorescent tracer particles released in a BCU. Test conditions included normal HVAC operation and exhaust failure resulting in loss of negative pressure. A suspension of optical brightener powder and water was nebulized to produce fluorescent particles simulating droplet nuclei (0.5‐5 μm). Airborne particle number concentrations were monitored by Instantaneous Biological Analyzers and Collectors (FLIR Systems). During normal HVAC operation, fluorescent tracer particles were contained in the isolation room (average concentration = 1 × 10⁴ ± 3 × 10³/L_air). Under exhaust failure, the automated HVAC system maximizes airflow into areas adjacent to isolation rooms to attempt to maintain negative pressure differential. However, 6% of the fluorescent particles were transported through cracks around doors/door handles out of the isolation room via airflow alone and not by movement of personnel or doors. Overall, this study provides a systematic method for evaluating capabilities to contain aerosolized particles during various HVAC scenarios. Recommendations are provided to improve situation‐specific BCU safety.     

Effect of midblock on the morphology and properties of blends of ABA triblock copolymers of PDLA-mid-block-PDLA with PLLA

A method to overcome the brittleness of poly (l-lactic acid) (PLLA) by kinetically trapping a continuous low T_g amorphous phase is presented. This morphology is accomplished by exploiting the significant difference in the crystallization temperatures of PLLA vs its stereocomplex with the poly (d-lactic acid) (PDLA) isomer. In our studies, the D isomer is the end block of a triblock copolymer with a configuration of the form PDLAn–Soft Blockm–PDLAn. As demonstrated in this study, when blended with PLLA, the obtained morphology, and improvement in the sample toughness and flexibility, strongly depend on the miscibility of the midblock in the triblock copolymer with the matrix PLLA. The difference in the chemical nature of the midblock clearly affected the stereocomplex crystallization between the PDLA end blocks, the PLLA matrix polymer, and the morphology formed. It is found that the miscible midblock gives rise to a soft continuous amorphous phase while in the case of an immiscible midblock, a glassy phase separated amorphous phase is formed. Dramatically different physical properties can be obtained for various PLLA/triblock copolymer blends giving access to tough, yet flexible, semicrystalline PLLA blends.     

A participatory process for the design of housing for a First Nations Community

First Nation (Indigenous) on-reserve housing in Canada is in crisis due to severe shortages, high reported instances of mould contamination, overcrowding and structural deficiencies. The Kitamaat reserve of the Haisla First Nation provides one example. The intent of the study reported here was to engage with the Haisla to develop a culturally appropriate, environmentally responsive and energy-efficient housing type that the Haisla could implement in the future. This work was undertaken by Marceau-Evans-Johnson Architects in collaboration with researchers at the University of Victoria. In this article, the circumstances leading to the present housing crisis are reviewed, the consultative design process with the Haisla and its outcomes are described, and the concept design solution which was co-developed for future housing is presented.     

Building dampness diagnosing the causes

In our January/February issue last year, Jim Smith described the insights he had gained as the human expert being ‘mined’ by the knowledge engineers for an expert system to aid diagnosis of the causes of dampness in buildings. An overview of that BREDAMP project is presented here, explaining the background to the project and its objectives, and the way the expert system was created, discussing in detail the methods used to capture the depth of knowledge available.     

Reconceptualising territoriality and spatial planning: insights from the sea

The concept of territoriality and its relationship to the focus and substance of spatial planning is the subject of much interest at the present time and this paper seeks to contribute to the debate by stepping into the sea. The first part of the paper establishes a framework for considering the spatial planning implications of changing conceptions of territoriality, outlining key sources of territorial innovation and their implications in terms of the development of new units and styles of governance, new challenges for planning practice, and the potential for feedback informing the development of planning theory. The application of the framework is then illustrated in the second part of the paper with reference to the emerging field of maritime spatial planning and in particular to the pioneering work that is being undertaken in Europe. This work is testing established notions of territoriality by highlighting the strong and growing connections between the land and the sea. Here some of the key implications for future spatial planning practice are identified. These indicate that there is a growing recognition of the need for innovation in the territorial units of governance in maritime regions and in the themes, processes and methods of spatial planning in these areas. The paper concludes with some observations on the implications of these findings for the theory of spatial planning.