Nanoparticle surface as activation site

The immense surface-to-volume (S/V) ratio in nanoparticles leads to large surface energy density. These high densities play the role of sites for activities that are not triggered in bulk materials. Here we present some examples of such distinctive activities taking place at nanoparticle surfaces. Our first example involves the morphological changes in silkworm (Bombyx mori L.) nuclear polyhedrosis virus (BmNPV) brought about by lipophilic amorphous silica nanoparticles (LASN). Microscopy studies show that nanoparticles severely alter the structure of the virus envelope by a 'deflation' of the viral polyhedron and formation of elongated structures. The second example shows the spatial variation in aggregation potential with temperature, for dodecanethiol-capped Au nanoparticles on an amorphous polystyrene film surface. We find that on increasing the temperature from 32 degrees C to 50 degrees C the aggregating potential becomes almost completely confined to the film surface, whereas going over to 100 degrees C the confining potential is overcome and out-of-plane growth takes place. A tentative and qualitative explanation has been attempted.     

Toxic effect of environmental acid-stress on the sperm of a hill-stream fish Devario aequipinnatus: a scanning electron microscopic evaluation

Environmental stress due to acidic pH of water was found to be one of the major factors leading to toxic effects on the sperm of a hill-stream fish Devario aequipinnatus of Meghalaya, India. The Scanning Electron Microscopy of the transverse section of testes of the fish collected from its natural habitat with acidic pH (5.6-6.0) showed that the sperms were clumped together and their tails were either absent or were of extremely small length. The acrosome and midpiece were also not well differentiated. When the fingerlings from the natural habitat were reared to maturity in aquarium with water from natural habitat after changing the pH to alkaline range (8.0-8.2), the clumping of the sperm was not observed. The sperm tail was found to be well-developed along with well-differentiated acrosome and midpiece. Since the only change in the water quality parameters of the experimental aquarium as compared to those of the natural habitat was the pH, it is evident that the abnormal features of the sperm observed in fish from natural habitat is mainly because of environmental acid stress.     

Product feature and functionality driven integrated framework for product commercialization in presence of qualitative consumer reviews

The purpose of this research is to aid manufacturers operating in multiple market segments (characterised by a number of product variants) to formulate and synchronise their product commercialisation strategy. Product commercialisation is primarily characterised by upgrading/launching product features aimed at meeting customer’s preferences, while at the same time, enabling the enterprise to achieve its major commercial objectives. Firstly, by employing the semi-automated crowd sourcing-based approach and considering qualitative customer evaluations, customer-preferred product features have been identified and their relative weights determined. Thereafter, a detailed mixed integer quadratic programming formulation has been evolved taking into account pertinent commercial objectives of the enterprise and engineering-level constraints of the product. The developed formulation has been solved using the Branch and Cut method of commercial solver, LINGO. Detailed sensitivity analysis has been carried out, followed by populating key managerial insights. The proposed framework has been illustrated using a real-life case example of operator cabin used in heavy construction equipment industry. Our focus has been on development and illustration of devised framework; hence, the superiority of results has not been claimed. Better results may be obtained using other heuristics/algorithms.     

The defluoridation of water by acidic alumina

Fluoride is considered as a major inorganic pollutant present in drinking water. To remove this excess fluoride, defluoridation was done by alumina. In the present study, alumina used was acidic in nature and hence considered as a good fluoride removing adsorbent. Characterization of the adsorbent was done by XRD, SEM, BET and FTIR with BET surface area of 144.27 m²/g. Systematic adsorption experiments were carried out with different process parameters such as contact time, adsorbent mass, pH, temperature and stirring speed. Fluoride adsorption by alumina was highly pH dependent. Maximum fluoride was removed from water at pH 4.4. At very low and very high pH, fluoride removal efficiency was affected. The study of thermodynamic parameters inferred that physical adsorption was dominant with activation energy of 95.13 kJ/mol and endothermic behavior of the process. The kinetics study concluded that pseudo second order kinetics was followed by the adsorption process. Adsorption equilibrium was studied with Langmuir and Freundlich isotherm models. The adsorption process followed Langmuir isotherm with an adsorption capacity of 8.4 mg/g. A regeneration study was proposed in order to reuse the adsorbent for better economy of the process. Finally, a process design calculation was reported to know the amount of adsorbent required for efficient removal of fluoride from aqueous medium.     

Improving Anodes for Lithium Ion Batteries

As energy demands increase for applications such as automotive, military, aerospace, and biomedical, lithium-ion battery capacities are forced to increase in a corresponding manner. For this reason, much research is directed toward the development of improved battery anodes. Carbon nanotubes (CNTs), silicon, tin, and nanocomposites with these metals are the leading candidates for the next generation of lithium-ion battery anodes, leading to capacities 3 to 10 times that of graphite alone. This review looks at some of the studies addressing high capacity lithium-ion battery anodes.     

Use of low dose e-beam irradiation to reduce E. coli O157:H7, non-O157 (VTEC) E. coli and Salmonella viability on meat surfaces

This study determined the extent that irradiation of fresh beef surfaces with an absorbed dose of 1 kGy electron (e-) beam irradiation might reduce the viability of mixtures of O157 and non-O157 verotoxigenic Escherichia coli (VTEC) and Salmonella. These were grouped together based on similar resistances to irradiation and inoculated on beef surfaces (outside flat and inside round, top and bottom muscle cuts), and then e-beam irradiated. Salmonella serovars were most resistant to 1 kGy treatment, showing a reduction of ≤ 1.9 log CFU/g. This treatment reduced the viability of two groups of non-O157 E. coli mixtures by ≤ 4.5 and ≤ 3.9 log CFU/g. Log reductions of ≤ 4.0 log CFU/g were observed for E. coli O157:H7 cocktails. Since under normal processing conditions the levels of these pathogens on beef carcasses would be lower than the lethality caused by the treatment used, irradiation at 1 kGy would be expected to eliminate the hazard represented by VTEC E. coli.     

A clocked high-pass-filter-based offset cancellation technique for high-gain biomedical amplifiers

In this article, a simple offset cancellation technique based on a clocked high-pass filter with extremely low output offset is presented. The configuration uses the on-resistance of a complementary metal oxide semiconductor (CMOS) transmission gate (X-gate) and tunes the lower 3-dB cut-off frequency with a matched pair of floating capacitors. The results compare favourably with the more complex auto-zeroing and chopper stabilisation techniques of offset cancellation in terms of power dissipation, component count and bandwidth, while reporting inferior output noise performance. The design is suitable for use in biomedical amplifier systems for applications such as ENG-recording. The system is simulated in Spectre Cadence 5.1.41 using 0.6 μm CMOS technology and the total block gain is ～83.0 dB while the phase error is <5°. The power consumption is 10.2 mW and the output offset obtained for an input monotone signal of 5 μVpp is 1.28 μV. The input-referred root mean square noise voltage between 1 and 5 kHz is 26.32 nV/√Hz.