Microstructure and phase composition of cordierite-based co-clinker

The aim of this work is to study the effect of phase composition and microstructure of cordierite-based co-clinkers on the electrical properties and coefficient of thermal expansion of cordierite briquettes. To achieve this aim talc and kaolinite samples were collected from quarries in the Egyptian desert. The samples are characterized using XRD, XRF, polarized light, cathodoluminescence and SEM microscopy attached with EDAX, in addition to X-ray micro-computed tomography (3D- µXCT). The electrical properties and coefficient of thermal expansion of the cordierite briquettes are determined using HiTESTER instrument and automatic Netzsch DIL402 PC dilatometer, respectively.Five talc-based batches were shaped and fired in the temperature range 1000–1350 °C for 2 h. The microstructural and physical characteristics of the resulted cordierite-based co-clinkers depend mainly on the viscosity of the liquid phase developed during firing. The microchemistry of the cordierite briquettes confirms their enrichment of both cordierite and ferroan-cordierite crystallized directly from locally developed melts. The dielectric constant and loss factor values for cordierite briquettes allow their possible use as insulator components in electronic applications.     

Thin water films and particle morphology evolution in nanocrystalline MgO

A key question in the field of ceramics and catalysis is how and to what extent residual water in the reactive environment of a metal oxide particle powder affects particle coarsening and morphology. With X‐ray Diffraction (XRD) and Transmission Electron Microscopy (TEM), we investigated annealing‐induced morphology changes on powders of MgO nanocubes in different gaseous H₂O environments. The use of such a model system for particle powders enabled us to describe how adsorbed water that originates from short exposure to air determines the evolution of MgO grain size, morphology, and microstructure. While cubic nanoparticles with a predominant abundance of (100) surface planes retain their shape after annealing to T = 1173 K under continuous pumping with a base pressure of water p(H₂O) = 10^?5 mbar, higher water partial pressures promote mass transport on the surfaces and across interfaces of such particle systems. This leads to substantial growth and intergrowth of particles and simultaneously favors the formation of step edges and shallow protrusions on terraces. The mass transfer is promoted by thin films of water providing a two‐dimensional solvent for Mg²⁺ ion hydration. In addition, we obtained direct evidence for hydroxylation‐induced stabilization of (110) faces and step edges of the grain surfaces.     

Role of Plant Volatiles in Host Plant Recognition by <Emphasis Type="Italic">Listronotus maculicollis</Emphasis> (Coleoptera: Curculionidae)

The annual bluegrass weevil (ABW), Listronotus maculicollis Kirby, is an economically important pest of short cut turfgrass. Annual bluegrass, Poa annua L., is the most preferred and suitable host for ABW oviposition, larval survival and development. We investigated the involvement of grass volatiles in ABW host plant preference under laboratory and field conditions. First, ovipositional and feeding preferences of ABW adults were studied in a sensory deprivation experiment. Clear evidence of involvement of olfaction in host recognition by ABW was demonstrated. Poa annua was preferred for oviposition over three bentgrasses, Agrostis spp., but weevils with blocked antennae did not exhibit significant preferences. ABW behavioral responses to volatiles emitted by Agrostis spp. and P. annua were examined in Y-tube olfactometer assays. Poa annua was attractive to ABW females and preferred to Agrostis spp. cultivars in Y-tube assays. Headspace volatiles emitted by P. annua and four cultivars of Agrostis stolonifera L. and two each of A. capillaris L. and A. canina L. were extracted, identified and compared. No P. annua specific volatiles were found, but Agrostis spp. tended to have larger quantities of terpenoids than P. annua. (Z)-3-hexenyl acetate, phenyl ethyl alcohol and their combination were the most attractive compounds to ABW females in laboratory Y-tube assays. The combination of these compounds as a trap bait in field experiments attracted adults during the spring migration, but was ineffective once the adults were on the short-mown turfgrass. Hence, their usefulness for monitoring weevil populations needs further investigation.     

Long term stability of electrocaloric response in barium zirconate titanate

The stability of the electrocaloric effect under electric field cycling is an important consideration in the development of solid-state cooling devices. Here we report measurements carried out on Ba(Zr_0.2Ti_0.8)O₃ ceramics which reveal that the adiabatic temperature change, polarization-electric field hysteresis loops and dielectric permittivity/loss show stable behavior up to 10⁵ cycles. We further demonstrate that the loss in electrocaloric response observed after 10⁵ cycles is associated with the migration of oxygen vacancies. As a result, the electrical properties of the material are changed leading to an increase in leakage current and Joule heating. Reversing the polarity of the electric field after every 10⁵ cycles changes the migration direction of oxygen vacancies, thereby preventing charge accumulation at grain boundaries and electrodes. By doing so, the electrocaloric stability is improved and the adiabatic temperature remains constant even after 10⁶ cycles, much higher than achieved in commercially available barium titanate ceramics.     

Study of Lewis acid catalyzed chemical bromination and bromoalkylation of multi-walled carbon nanotubes

Chemical functionalization of carbon nanotubes (CNT) with nucleophiles requires introduction of electrophilic reactive sites on the CNTs. This can, for instance, be accomplished by the chemical bromination procedure with elemental bromine and a set of Lewis acids (BBr₃, BF₃ × Et₂O, AlBr₃, FeBr₃, ZnBr₂, TiBr₄, SiBr₄, SnBr₄, VBr₃) or a radical starter like dibenzoylperoxide (DBPO) in appropriate solvents at varied temperature. The present approach to electrophilic sites relies on the well-known electrophilic aromatic substitution or addition of bromine with aromatic structural units. In addition to the use of bromine, the introduction of haloalkyl groups was also investigated here using bis-electrophiles or haloalcohols and Brønsted acids. The advantages and drawbacks of the studied reaction conditions, the obtained degree of bromination as analyzed by X-ray photoelectron spectroscopy (XPS) and the amount of introduced bromine that can be substituted by a nucleophile are presented and discussed.     

Porous concrete as a template for the synthesis of porous carbon materials

The potential of industrial porous concrete for using as a template for the synthesis of porous carbon materials has been investigated. Carbon replicas of porous concrete have been prepared by carbonization of sucrose. The pores of the resulting carbon materials range from the macropore to the micropore region, pointing to a hierarchy.     

Interaction of 1-allyl-3-methyl-imidazolium chloride and carbon black and its influence on carbon black filled rubbers

The interactions of the ionic liquid 1-allyl-3-methyl-imidazolium chloride (AMIMCl) with different grades of carbon black have been investigated using rheological measurements, differential scanning calorimetry and Raman spectroscopy. We could prove strong attractive interactions of AMIMCl with the carbon black surface, which result, for example, in the formation of an AMIMCl–carbon black–bucky gel and in an increased glass transition temperature of the ionic liquid in the presence of carbon black. Raman spectroscopy revealed that the AMIMCl is preferably attached to the edges of graphitic crystals at the carbon black surface, which have the highest adsorption energies. A surface treatment of different grades of carbon black with AMIMCl led to significant changes of the mechanical and electrical properties of different rubber compounds filled with carbon black, which can be attributed to a decreased filler–polymer interaction and a local plasticising effect of the AMIMCl at the carbon black surface.     

Wood‐Plastic‐Composites: Rheologische Charakterisierung und Füllverhalten im Spritzgießprozess

Wood‐plastic composites (WPC) show a complex and completely different material and flow behavior in comparison to pure polymers. Especially the flow behavior is very important for the processing of these composites. In the following article results of rheological characterization and investigations of the filling behavior during the injection molding process are presented. Furthermore, appearing challenges and possible methods of resolution are discussed.