Characteristics of tiger nut milk: effects of milling

A standard method for the extraction of tiger nut milk has been introduced. It has been shown that, although milling duration improves the yield of tiger nut milk solids and its nutrient composition, there is a quantifiable loss of nutrient in the pressing residue during milk extraction. Milling duration improved the colloidal stability of the milk against creaming during 16 h of storage. A higher milling intensity resulted in the aggregation of biological polymers which resulted in colloidal destabilisation. Milling improved the lightness and stability and reduced browning rate of the tiger nut milk during storage. This report is important for the production of tiger nut milk of consistent and comparable characteristics. Milling has been introduced as a processing method for the qualitative and quantitative modulation of the properties of tiger nut milk. It is recommended to develop further strategies to improve the colloidal stability of tiger nut milk as a beverage.     

Digital self-control interventions for distracting media multitasking - A systematic review

Digital distractions can interfere with goal attainment and lead to undesirable habits that are hard to get red rid of. Various digital self-control interventions promise support to alleviate the negative impact of digital distractions. These interventions use different approaches, such as the blocking of apps and websites, goal setting, or visualizations of device usage statistics. While many apps and browser extensions make use of these features, little is known about their effectiveness. This systematic review synthesizes the current research to provide insights into the effectiveness of the different kinds of interventions. From a search of the ‘ACM’, ‘Springer Link’, ‘Web of Science’, ’IEEE Xplore’ and ‘Pubmed’ databases, we identified 28 digital self-control interventions. We categorized these interventions according to their features and their outcomes. The interventions showed varying degrees of effectiveness, and especially interventions that relied purely on increasing the participants' awareness were barely effective. For those interventions that sanctioned the use of distractions, the current literature indicates that the sanctions have to be sufficiently difficult to overcome, as they will otherwise be quickly dismissed. The overall confidence in the results is low, with small sample sizes, short study duration, and unclear study contexts. From these insights, we highlight research gaps and close with suggestions for future research.     

Synthesis and evaluation of some functionalized difuran diesters as plasticizers for PVC

Butyl, hexyl, and 2-ethylhexyl diesters of 1,1-bis(5-carboxyl-2-furyl)-2,2-dichloroethene, hexyl and 2-ethylhexyl diesters of 1,1-bis(5-carboxyl-2-furyl) ketone, and the hexyl diester of 1,1-bis(5-carboxyl-2-furyl)methane were synthesized from furfural and evaluated for their plasticizing abilities toward PVC, by the application of dynamic mechanical thermal analysis and [di(2-ethylhexyl) phthalate] as a standard of reference. © 1995 John Wiley & Sons, Inc.     

Laparoscopic operation of a Morgagni hernia

Morgagni hernias are the least common form of diaphragmatic hernias. Although they are congenital, most of them are not diagnosed until later in life. The indication for surgery is based on the patient's symptoms or on the radiological evidence of incarcerated tissue, and until quite recently involved a laparotomy or thoracotomy. Laparoscopy not only permits the suspected diagnosis to be confirmed--which is otherwise often difficult--but also makes it possible to close the hernia site by suturing. For improved security, the hernia site is augmented by fixing in place a non-absorbable mesh. The operative technique employed is described.     

Review of the Robotica software package for robotic manipulators

Robotica is a computer-aided design package for robotic nmanipulators developed at the Coordinated Science Laboratory at the University of Illinois at Urbana- Champaign. The package is a collection of function definitions for the Mathematica symbolic mathematics program. Robotica can be used either with an X- Windows graphical user interface (GUI) on a Sun Workstation or as an included function definition file within Mathematica. The primary feature of Robotica is the ability to compute, symbolically or numerically, the kinematic and dynamic equations of arbitrary robot systems utilizing the standard Denevit-Hartenburg (DH) kinematic convention. Robotica also provides the ability to visualize these arbitrary manipulators using the X- Windows graphical interface to the Mathematica graphics routines. The paper looks at the usage of Robotica at the Air Force Institute of Technology, comments on the features of Robotica, and needs for improvement and suggestions for future development     

A comparison of two conformal methods for FDTD modeling

Two conformal finite-difference time-domain (FDTD) methods are considered, the contour path (CPFDTD) method of Jurgens et al. (see IEEE Trans. Antennas Propagat., vol.40, p.357, 1992) and the overlapping grid (OGFDTD) method of Yee et al. (see IEEE Trans. Antennas Propagat., vol.40, p.1068, 1992). Both TE and TM scattering from a two-dimensional (2-D), perfectly conducting circular cylinder are used to test the accuracy of the methods for curved surfaces. Also, TE and TM scattering from a 2-D, perfectly-conducting rotated square cylinder are used to test the accuracy for corners and edges. It is shown that the conformal method proposed by Yee et al. provide significant improvement in accuracy over the original FDTD algorithm for most of the geometries studied. However, implementation becomes more difficult as the geometries become more complex. The conformal method proposed by Jurgens et al. provide significant improvement in accuracy as well for most of the geometries studied. However, improvement does not occur for the TM case when the square cylinder is not aligned properly with the grid. Implementation of the CPFDTD method is relatively straightforward. For the majority of the cases studied, the OGFDTD method is more accurate than the CPFDTD method     

A discontinuous buffer system increasing resolution and reproducibility in DNA sequencing on high voltage horizontal ultrathin-layer electrophoresis

A novel discontinuous buffer system for DNA sequencing based on horizontal ultrathin-layer gel electrophoresis is described. The optimized system, named unbuffered stacking gel/discontinuous borate EDTA-buffer system, is composed of a 0.5 mm thick stacking gel, where standard sequencing reactions (1 microL volume) are easily loaded, and a 50 microns ultrathin running gel, where DNA fragments are separated. The novel discontinuous buffer system allows for sample concentration and efficient injection from the stacking gel into the capillary slab gel. Increased resolution, assessed by autoradiography, can be achieved within 25 min running time already over a 10.1 cm distance from the gel slot compared to the conventional gel system. An advantage of the new system is the capacity to resolve compressions in GC-rich regions, usually causing migrating artifacts in standard gels. The described system affords a major improvement in speed, resolution and reproducibility in DNA sequencing.     

Duration of spinal anaesthesia is determined by the partition coefficient of local anaesthetic

We have compared the duration of motor block produced by four local anaesthetics administered into a chronically implanted subarachnoid catheter in rabbits. Each group (n = 6) received four different doses of amethocaine, bupivacaine, lignocaine or procaine, and the duration of the resulting motor block was assessed. Dose-response curves were plotted for each drug. As a measure of activity of the anaesthetics, we used the dose of each drug required to produce block of 60-min duration (D60 min) and the correlation between D60 min and different drug properties was examined. An inverse linear correlation (r = 0.995; P < 0.01) was observed between log D60 min and the log of the partition coefficient of the local anaesthetics. No correlation was found between the effect and degree of protein binding, pKa or molecular weight. These results suggest that, in spinal anaesthesia, the partition coefficient could be used as a predictor of the duration of anaesthetic action.     

High yield formation of carbon nanotubes using a rotating cathode in open air

Carbon nanotubes (CNTs) have been synthesized using the arc discharge method with a rotating graphite disc as the cathode. Arcing was carried out in open air and without the use of catalysts. The current density was maintained constant through out the experiment, while, the rate of rotation of the cathode and atmosphere under which arcing was carried out were changed during experimentation. Characterization of the samples produced indicates that rotation of the cathode has a significant impact on the quality and yield of the process. It is proposed that rotation of the cathode drags plasma formed between two electrodes away from high temperature region. This results in a sudden quenching of the reactive plasma. The time available for nucleation and growth phenomena is significantly reduced and thus leads to the formation of highly graphitic multi walled CNTs (yield 60%) and traces of double walled CNTs.