Carbon materials modified by plasma treatment as electrodes for supercapacitors

The carbon material was modified by RF plasma with various reactive gases: O₂, Ar and CO₂. Physicochemical properties of the final carbon products were characterized using different techniques such as gas adsorption method and XPS. Plasma modified materials enriched in oxygen functionalities were investigated as electrodes for supercapacitors in acidic medium. The electrochemical measurements have been carried out using cyclic voltammetry, galvanostatic charge/discharge and impedance spectroscopy. The electrochemical measurements have confirmed that capacity characteristics are closely connected with a type of plasma exposition. Modification processes have an influence on the kind and amount of surface functional groups in the carbon matrix. The moderate increase of capacity of carbon materials modified by plasma has been observed using symmetric two-electrode systems. Whereas investigations made in three-electrode system proved that the suitable selection of plasma modification parameters allows to obtain promising negative and positive electrode materials for supercapacitor application.     

Anti‐corrosion additive for concrete

The Building Research Institute in Warsaw has developed an organic concrete additive, known as Dikszopt, which is derived from tanning oak extract. Tests, mostly in the laboratory but some in application trials, show that it has a remarkable ability to protect reinforcing steel against corrosion, notably in carbonized concrete. It also appears to improve the consistency of the concrete mix and retard the setting time, as discussed in this article from the Institute.     

Calcium Ions Regulate K+ Uptake into Brain Mitochondria: The Evidence for a Novel Potassium Channel

The mitochondrial response to changes of cytosolic calcium concentration has a strong impact on neuronal cell metabolism and viability. We observed that Ca²⁺ additions to isolated rat brain mitochondria induced in potassium ion containing media a mitochondrial membrane potential depolarization and an accompanying increase of mitochondrial respiration. These Ca²⁺ effects can be blocked by iberiotoxin and charybdotoxin, well known inhibitors of large conductance potassium channel (BK_Ca channel). Furthermore, NS1619 – a BK_Ca channel opener – induced potassium ion–specific effects on brain mitochondria similar to those induced by Ca²⁺. These findings suggest the presence of a calcium-activated, large conductance potassium channel (sensitive to charybdotoxin and NS1619), which was confirmed by reconstitution of the mitochondrial inner membrane into planar lipid bilayers. The conductance of the reconstituted channel was 265 pS under gradient (50/450 mM KCl) conditions. Its reversal potential was equal to 50 mV, which proved that the examined channel was cation-selective. We also observed immunoreactivity of anti-β₄ subunit (of the BK_Ca channel) antibodies with ~26 kDa proteins of rat brain mitochondria. Immunohistochemical analysis confirmed the predominant occurrence of β₄ subunit in neuronal mitochondria. We hypothesize that the mitochondrial BK_Ca channel represents a calcium sensor, which can contribute to neuronal signal transduction and survival.     

Numerical modelling of radiative heat transfer in an internal indirect reforming-type SOFC

The present paper describes numerical modelling of the radiative heat transfer process in the module chamber of an internal indirect reforming-type SOFC. The ability to do internal reforming is one of the characteristics of high-temperature fuel cells, SOFC. As in any high-temperature system, radiative heat transfer is important. In this article, heat transfer between the fuel reformer surface and all other surfaces facing the reformer surfaces is modelled. Governing equations for radiative heat transfer are described using Hottel's zone method. The resulting radiation–conduction conjugate heat transfer problems are numerically solved with a combination of Gauss–Seidel and Newton–Raphson methods. The steam reforming reaction occurring inside the fuel reformer is described using Achenbach model. The obtained results indicate that, for the development of effective indirect internal reforming, the position of the reformer in the module chamber and emissivity of the surfaces of the reformer, cell and other elements in the SOFC module all play a key role.     

Structure and properties of 6061 + 26 mass% Si aluminum alloy produced via coupled rapid solidification and KOBO-extrusion of powder

Experiments on mechanical consolidation of rapidly solidified (RS) powder of 6061 + 26 mass% Si alloy were performed using the oscillating-die extrusion method. The RS powder was wrapped in thin-wall 6061-alloy cup 35 mm in diameter and vacuum-compressed by means of 100 ton press. Bars 8 mm in diameter were extruded with cross-section reduction of λ = 19 without any preheating of the charge. Tubes with a diameter/wall thickness of 14 mm/1 mm and cross-section reduction of λ = 33 were also manufactured with success. TEM/STEM observations revealed a very fine structure of as-extruded material and bimodal distribution of quasi-spherical silicon particles. Statistical analysis revealed a silicon fine fraction of 0.1–0.7 μm and a coarse fraction 2.1–2.5 μm in diameter. Examination by means of TEM did not reveal any significant changes in the morphology of the silicon particles, even when a high extrusion ratio and the material annealing after deformation were used. Hot compression tests on as-extruded rods (λ = 19) and preliminary annealed samples were performed at a constant true strain rate of 5 × 10^?3 s^?1 within the temperature range of 293–823 K. High strength of the material and relatively high ductility of samples deformed by compression up to ?_t ? 0.4 were observed. The maximum flow stress value for as-extruded material was reduced with deformation temperature from ～390 to ～3.5 MPa for 293 and 823 K, respectively. Annealing of the samples at 773 K/30 min was found to reduce the maximum flow stress by 30–40%. Tensile strengths of similar as-cast alloys and materials manufactured by means of other powder metallurgy methods were shown for the purpose of comparison.     

Wetting Behavior and Reactivity of Molten Silicon with h-BN Substrate at Ultrahigh Temperatures up to 1750 °C

For a successful implementation of newly proposed silicon-based latent heat thermal energy storage systems, proper ceramic materials that could withstand a contact heating with molten silicon at temperatures much higher than its melting point need to be developed. In this regard, a non-wetting behavior and low reactivity are the main criteria determining the applicability of ceramic as a potential crucible material for long-term ultrahigh temperature contact with molten silicon. In this work, the wetting of hexagonal boron nitride (h-BN) by molten silicon was examined for the first time at temperatures up to 1750 °C. For this purpose, the sessile drop technique combined with contact heating procedure under static argon was used. The reactivity in Si/h-BN system under proposed conditions was evaluated by SEM/EDS examinations of the solidified couple. It was demonstrated that increase in temperature improves wetting, and consequently, non-wetting-to-wetting transition takes place at around 1650 °C. The contact angle of 90° ± 5° is maintained at temperatures up to 1750 °C. The results of structural characterization supported by a thermodynamic modeling indicate that the wetting behavior of the Si/h-BN couple during heating to and cooling from ultrahigh temperature of 1750 °C is mainly controlled by the substrate dissolution/reprecipitation mechanism.     

Nafion‐115/aromatic poly(etherimide) with isopropylidene groups/imidazole membranes for polymer fuel cells

Proton exchange membrane fuel cells (PEMFCs) with Pt/C gas diffusion electrodes and graphite single‐serpentine monopolar plates were constructed based on an aromatic poly(etherimide) with isopropylidene groups (PI)/imidazole (Im) and a popular Nafion‐115 matrix. The electrochemical properties of PEMFCs were tested at 25 and 60°C. The maximum power density of 171 mW/cm² and the maximum current density of 484 mA/cm² were detected for Nafion‐115/PI membrane. For both constructed PEMFCs the efficiency at 0.6 V was found about 41%. Immersion of Nafion‐115 in PI or PI/Im increased the thermal stability and mechanical properties of membranes. Thermal, mechanical properties and morphology of membranes were characterized by TGA, and AFM techniques including force spectroscopy. Interactions between the components in composite membranes were established by FT‐IR. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42436.     

Conversion of a Mono‐ and Diacylglycerol Lipase into a Triacylglycerol Lipase by Protein Engineering

Despite the fact that most lipases are believed to be active against triacylglycerides, there is a small group of lipases that are active only on mono‐ and diacylglycerides. The reason for this difference in substrate scope is not clear. We tried to identify the reasons for this in the lipase from Malassezia globosa. By protein engineering, and with only one mutation, we managed to convert this enzyme into a typical triacylglycerol lipase (the wild‐type lipase does not accept triacylglycerides). The variant Q282L accepts a broad spectrum of triacylglycerides, although the catalytic behavior is altered to some extent. From in silico analysis it seems that specific hydrophobic interactions are key to the altered substrate specificity.     

Investigation of Serine‐Proteinase‐Catalyzed Peptide Splicing in Analogues of Sunflower Trypsin Inhibitor 1 (SFTI‐1)

Serine‐proteinase‐catalyzed peptide splicing was demonstrated in analogues of the trypsin inhibitor SFTI‐1: both single peptides and two‐peptide chains (C‐ and N‐terminal peptide chains linked by a disulfide bridge). In the second series, peptide splicing with catalytic amount of proteinase was observed only when formation of acyl–enzyme intermediate was preceded by hydrolysis of the substrate Lys–Ser peptide bond. Here we demonstrate that with an equimolar amount of the proteinase, splicing occurs in all the two‐peptide‐chain analogues. This conclusion was supported by high resolution crystal structures of selected analogues in complex with trypsin. We showed that the process followed a direct transpeptidation mechanism. Thus, the acyl–enzyme intermediate was formed and was immediately used for a new peptide bond formation; products associated with the hydrolysis of the acyl–enzyme were not observed. The peptide splicing was sequence‐ not structure‐specific.     

Correlation Between Cutting Data Selection and Chip Form in Stainless Steel Turning

This article presents investigations related to the turning of stainless steel as a representative of difficult-to-cut materials and the effectiveness of selected chip breakers working in the local machining environment. Martensitic steel AISI 416 was used to test two commercially available types of chip breaker. The efficiency of a chip breaker working in the range of cutting conditions recommended (by the tool manufacturers) was the aim of the turning tests. As a result of the investigations an algorithm of cutting condition selection, combining both the cutting tests and the simulation procedure for the efficiency of the chip breaker was created. The vision system, equipped with a high-speed camera was used for chip form estimation. Simultaneously, the cutting force components were measured to check if the simulation calculation was correct. The FEM simulation was applied to estimate the manner in which the chip groove was filled. The article presents certain recommendations for cutting condition correction in the local machining environment for the purpose of achieving an acceptable chip form.