基于VXI总线的机载火控系统自动测试仪的设计

目的　对作战飞机火控系统的故障检测 ,传统的方法是使用多种检测仪器对机载火控设备进行性能检查 ,不仅技术含量低 ,也给飞机转场后技术阵地的转移带来不便 ,不能满足现代战争的需要 ,为提高战机的作战效能和快速反应的能力 ,研制了机载火控系统自动测试仪 .方法　采用 VXI总线技术、合理的硬件配置和在 Lab Windows/CVI环境下的软件模块化设计方案 .结果　在实际应用中取得了良好效果 ,为技术人员进行机载火控系统的性能及故障检测提供了便利 .结论　该测试仪具有测试结果准确 ,自动化程度高 ,工作稳定可靠 ,操作简便 ,易于转移和维护等优点 ,并具有较高的抗干扰能力 ,不仅适用与内场 ,还可用于在外场对机载火控系统进行原位检测     

纳米β-Ni(OH)2与球型Ni(OH)2的热性能比较研究

用配位沉淀法合成出纳米级Ni（OH）2，并对其进行XRD，TEM，DSC分析，分析结果表明，所得纳米β-Ni（OH）2为可用作电极材料的β-Ni（OH）2，粒径为30－40nm，且热分解温度比普通球镍低10℃左右，摩尔分解热比普通球镍低4－7kJ，从理论上分析了产生此现象的原因。     

分割电极片状压电致动器——(二)位移特性及狭缝宽度对其影响的实验研究

研究了悬臂梁式分割电极片状压电致动器的位移特性。理论分析表明，分割电极狭缝宽度会减小致动器自由端的位移输出，但当狭缝宽度小于致动器电极宽度的１０％时，可忽略狭缝宽度的影响。致动器端部位移的测试结果大于理论计算值。与现有磁头悬浮臂尺寸相近的致动器，在２０Ｖ～５０Ｖ的电压驱动下均可获得１μｍ～２μｍ的致动位移。对９８５０道／厘米的密度磁盘，该位移能覆盖至少一个磁道宽度，满足磁头定位两级伺服系统对第二级致动器位移的基本要求。     

浅谈ispLSI及其应用

本文以ｉｓｐＬＩＳＩ１０００系列为例，对ｉｓｐ技术及ｉｓｐＬＳＩ器件进行了较为详细的介绍，并结合具体设计实例，介绍ｉｓｐＬＳ开发工具的使用。     

Synthesis, characteristics and oxygen-sensitive properties of SrMgxTi 1 − xO3 nanocrystals

SrMg_xTi_{1 - x}O₃ nanocrystals (x = 0.1–0.6) were synthesized by the stearic acid gel method. Powder samples were characterized by X-ray diffraction and X-ray photoelectron (XP) spectroscopy. The results showed that the lattice parameter a and the O 1s XP spectrum changed not only with the Mg content x but also with the grain size d of the samples. The conductivity of a thick film specimen fabricated on an aluminium oxide wafer was investigated in a nitrogen—oxygen atmosphere.     

Clinical and experimental observation of xilixin granule combined with radiotherapy in treating malignant-tumors

Thirty six patients of pulmonary or nasopharyngeal carcinoma were treated with Xilixin granule (XLXG) combined with radiotherapy and compared their efficacy with that of 31 patients treated by Zhenqi Fuzheng granule combined with radiotherapy for control. Results showed that the symptoms of Yin Deficiency syndrome in treated group were obviously improved, the leucocyte decreased by 5.6%, while in control group it reached 25.8%, the 3 year survival rate was significantly higher in treated group (75.0%) than that in control group (51.6%). Animal experiment revealed that XLXG had the effects of tumor inhibition, it could increase white blood cells, platelets and hemoglobin of patients, especially in using large dosage. These results suggested that XLXG have some protective effect against radiotherapeutic damage in patients with malignant tumor.     

Pore size control of porous silica by sol-gel process

Porous silica glass was prepared by sol-gel process from tetraethoxysilane (TEOS). The effects of solvents (water, ethanol), drying condition, heat treatment temperature on specific surface area and pore size distribution of porous silica were investigated. Gelation process accelerates with an increase of H₂O content, while retards with the increase of ethanol amount. Structure changes during heat treatment were studied by means of DTA, XRD. TEM micrographs show that the gel particles shrink after heated at 500°C, thus the average pore size decreases.     

Effect of processing history on the properties of Ag-based tapes

The Bi-system tapes and coils were prepared by the powder-in-tube method. The effect of processing and heat treatment on the properties of the tapes and coils was studied. It is found that the shearing stress produced by the rolling process may destroy the 2223 phase, and the destroyed 2223 phase cannot be recovered by heat treatment, whereas the pressing stress produced by the uniaxial pressing process only makes the 2223 phase grains break, and the broken 2223 phase can be closed by the heat treatment. TheJ _c values of the rolling samples, pressing sample, and the coil with a diameter of 35 mm are over 1.3×10⁴, 2.5×10⁴, and 4×10³ A/cm² (77 K, 0 T), respectively.     

溶胶－凝胶法制备Pb（Zr，Ti）O_3玻璃陶瓷过程中的结构变化

本文介绍溶胶－凝胶法制备均匀ＰｂＺｒ－Ｔｉ－Ｂ－Ｓｉ凝胶玻璃，并通过适当热处理在凝胶玻璃中原位生长Ｐｂ（Ｚｒ；Ｔｉ）Ｏ３微晶的新工艺·利用ＩＲ谱考察了凝胶玻璃中的元素键合结构随温度的变化．结合热分析和ＸＲＤ；ＳＥＭ技术，研究了Ｐｂ（Ｚｒ，Ｔｉ）Ｏ３微晶在凝胶玻璃中的生长过程及该材料的结构特点．发现Ｐｂ２（Ｚｒ，Ｔｉ）２Ｏ６＋ｘ立方焦绿石介稳过渡相的纳米微晶首先出现于该体系中，并在更高的温度下先后完全转变成三方和四方Ｐｂ（Ｚｒ，Ｔｉ）Ｏ３钙钛矿相．电子显微观察结果表明，该工艺制备的Ｐｈ（Ｚｒ；Ｔｉ）Ｏ３玻璃陶瓷具有均匀的细晶结构．     

A new algorithm for improving the accuracy of periodic signalanalysis

Digital periodic signal analysis often requires synchronized sampling with the signal being analyzed. In certain practical situations, however, this condition is difficult to satisfy. As a result, a number of undesirable effect such as the spectral leakage associated with the discrete Fourier transform (DFT), and the truncation errors in digital wattmeters arise and degrade system performance. This paper presents a new approach which attempts to remedy the underlying problem. The basic idea of the proposed method is to modify the actual sampled sequence such that it becomes an ideal sample sequence which is synchronized with the signal subjected to sampling. A simple algorithm for modifying the sampled sequence on-line is derived based on interpolation. The proposed approach requires quite modest additional computational burden which makes it suitable for real-time signal professing. To illustrate the practical applicability of the proposed algorithm, the paper considers two distinct but common cases. First, it shows how the proposed method can be used in the case of DFT analysis of harmonic signals, and secondly, it considers the digital wattmeter application area in electrical power-system measurement. Results show that the proposed algorithm is capable of reducing both the leakage effect in DFT analysis and truncation errors in digital wattmeters