Self-Diffusion of Iron in Molten Fe-C Alloys

Self-diffusion coefficients of iron in molten Fe-C alloys have been measured by using the capillary method. In addition, the samples have been autoradiographed and sectioned to insure that no significant convection has occurred during the diffusion. The results can be represented by the equation D = 4.3×10^?3 exp (—12.200/RT) for carbon = 4.6 pct and T = 1513° to 1633°K; and D = 1.0×10^?2 exp (—15,700/RT) for carbon = 2.5 pct and T = 1613° to 1673°K. The D values are higher and the heat of activation for diffusion lower in alloys containing more carbon. Calculation based on the Einstein-Stokes equation indicates that the diffusing species is iron ion.     

A computational fluid dynamic analysis of gas and particle flow in flame spraying

The flame spraying process, which is a common industrial thermal spraying application, has been analyzed by means of three-dimensional computational fluid dynamics (CFD) simulations. The process used at the Volvo Aero Corporation for the coating of fan and compressor housings has been modeled. The process uses the Metco 6P torch (Metco, Westbury, NY), which ejects a mixture of acetylene and oxygen at high speed through a ring of 16 orifices to form the flame. A stream of argon gas flowing through an orifice in the center of the ring carries a powder of nickel-covered bentonite through the flame to the spray substrate. The torch is cooled by a flow of air through an outer ring of 9 orifices. The simulation emulated reality closely by including the individual inlets for fuel, cooling air, and injected particles. The gas combustion was simulated as a turbulent, multicomponent chemically reacting flow. The standard, two-equation k-ε turbulence model was used. The chemical reaction rates appeared as source terms in the species transport equations. They were computed from the contributions of the Arrhenius rate expressions and the Magnussen and Hjertager eddy dissipation model. The first simulations included several intermediate chemical substances whose predicted concentration agreed favorably with measurements. Later, more simplified simulations incorporated only the global chemical reaction involving the initial and the final products, with corrections to the thermal properties being made to account for the missing intermediaries. The gas velocity and temperature fields predicted by the later simulations compared satisfactorily to those predicted by the earlier, more elaborate, ones. Therefore, the final simulations, which incorporated injected particles, were conducted employing the simplified model with only the global reaction. An in-house finite difference code was developed to calculate particle properties. Allowance was made for elliptical shapes, phase changes, and internal heat transfer with regard to the composite material. The particle velocities and temperatures predicted by the final simulations compared fairly well with experimental results obtained with the optical DPV2000 system.     

保温条件下过共晶Al-Si合金半固态浆料的组织演变

研究了保温时间和保温温度对电磁搅拌ZL117合金半固态浆料稳定性的影响.试验结果表明：半固态浆料中初生Si的颗粒直径随着保温时间的延长而逐渐增大,但在前15 min内增长速度比较缓慢,15 min后增长较快;随着保温温度的升高而缓慢增大;初生Si的形状系数随着保温时间的延长而变得越来越大,但也在前15 min内变化较为缓慢,15 min后变大速度突然加快;初生Si的形状系数在620 ℃下保温时最小,在610～620 ℃之间随着保温温度的升高而缓慢变小;在620～650 ℃之间随着保温温度的升高而逐渐增加.     

烷基磺酸钠型砂的质量控制

介绍了控制烷基磺酸钠型砂的混砂工艺、配制要点及保存使用等控制要点，并就实际生产中可能出现的一些问题作了探讨，提出了解决的办法。     

Investigation of the grain coarsening behavior of some Aluminum alloys

Grain coarsening tests were carried out on Al-4.5 pct Cu and Al-4.5 pct Si alloys. The effects of three variables, melt composition, pour temperature, and mold temperature, were determined. It was found that the macrostructure generally coarsened with increased pour and mold temperatures. Coarsening was extreme in the unrefined alloys but was retarded by the active grain refiners like titanium and columbium. The effect of boron was spectacular in suppressing coarsening tendencies. The results of the investigation support the carbide theory of nucleation as opposed to the peritectic theory.     

活性炭吸附硫脲溶液中的金离子之形态

由实验得出活性炭从硫脲溶液中吸附金的特点,根据络合化学原理找到溶液中被吸附离子形态是AuTu~+,AuTu_2~+和Au~+,并解释了实验现象。     

Chromium distribution between liquid iron and molten basic slags

An equilibrium study was made of the distribution of chromium and oxygen between liquid iron, containing less than 1 pct Cr, and simple slags of the CaO(MgO)-SiO₂-FeO-Cr₂O₃ type in the temperature range 1526° to 1734°C The effects of slag oxidation, temperature, and basicity were observed.     

一种基于RGV、AGV的柔性输送系统

随着现代制造业的迅速发展,我国的物流行业也随之崛起,并且逐渐受到全社会的广泛关注。早期的人工物流、机械化物流方式,已经远远不能满足现在大规模生产流水线的需求。本文提出了一种基于RGV、AGV的柔性输送系统,其中环形RGV输送系统通过成对的码头和码头之间的流水线与AGV输送系统、非环形往复式RGV输送系统相接驳;AGV输送系统和非环形往复式RGV输送系统用于将物流货品从环形RGV输送系统送入或送出指定物流系统。该系统有效地克服传统单一RGV输送系统对使用场所的适应性差、轨道占用空间大等缺点,同时避免使用单一AGV输送系统带来的输送效率较低、设备及维护成本较高等问题。     

External sorting on flash storage: reducing cell wearing and increasing efficiency by avoiding intermediate writes

This paper studies the problem of how to conduct external sorting on flash drives while avoiding intermediate writes to the disk. The focus is on sort in portable electronic devices, where relations are only larger than the main memory by a small factor, and on sort as part of distributed processes where relations are frequently partially sorted. In such cases, sort algorithms that refrain from writing intermediate results to the disk have three advantages over algorithms that perform intermediate writes. First, on devices in which read operations are much faster than writes, such methods are efficient and frequently outperform Merge Sort. Secondly, they reduce flash cell degradation caused by writes. Thirdly, they can be used in cases where there is not enough disk space for the intermediate results. Novel sort algorithms that avoid intermediate writes to the disk are presented. An experimental evaluation, on different flash storage devices, shows that in many cases the new algorithms can extend the lifespan of the devices by avoiding unnecessary writes to the disk, while maintaining efficiency, in comparison with Merge Sort.