Penetration of nanoparticles through fibrous filters perforated with defined pinholes

This paper presents experimental data for penetration of nanoparticles in the 4–30 nm size range through fibreglass filters perforated with defined pinholes at 5 and 15 cm/s. Results show that, when the filter is damaged, penetration increases with decreasing particle diameter. This lower performance is more significant for filters with high airflow resistance. A model explaining the experimental data has been designed based on balanced, laminar airflow inside the pinhole; these conditions were confirmed by detailed study. The experimental points agreed very closely with this model.     

Potential of ionic liquids for VOC absorption and biodegradation in multiphase systems

This work aims to evaluate the feasibility of using imidazolium ionic liquids (ILs) in the design of multiphase bioreactors for the removal of volatile organic compounds (VOCs). The IL affinity for three model VOCs (dimethyl sulfide, dimethyl disulfide and toluene) was evaluated by means of the dimensionless partition coefficient (K). It was observed that ILs showed K values comparable to typical liquid solvents used in multiphase bioreactors for VOC biodegradation (K values ranged from 0.009 to 0.011, 0.0012 to 0.0013 and 0.00061 to 0.00096 for dimethyl sulfide, dimethyl disulfide and toluene, respectively). Toxicity tests showed that both ILs at concentrations of 5% and 10% (v/v) inhibited the glucose uptake of an activated sludge during approximately 24 h. After such lag period, the microorganisms were able to recover its metabolic activity. However, VOC biodegradation experiments showed that ILs at 5% (v/v) were toxic for the activated sludge and a toxic synergistic effect of the IL–VOC combination likely occurred. After acclimation to the target VOCs, only the toluene biodegradation capacity was significantly increased in the presence of ILs. These toxic effects represent a key drawback for the potential of IL-based multiphase systems devoted to VOC biodegradation. Therefore, this study suggests that microbial acclimation only to the VOCs is not enough to get an efficient biodegradation in multiphase systems including ILs as non-aqueous phases.     

Clinical Determination of Dry Body Weight

While nephrologists wait for the ideal, non invasive, inexpensive, precise, and reproducible tool to evaluate extracellular volume (ECV), they need to exert their clinical acumen in the quest of that holy grail, dry weight (DW). Estimation of DW using a clinical approach based on blood pressure (BP) and ECV is feasible and reliable as shown by successful experiences in various dialysis modes over more than three decades. But a need still exists to resolve difficulties associated with accurate assessment of BP (methods and circumstances of measurement, and the confounding effects of antihypertensive drugs) and ECV (evaluation of weight changes unrelated to ECV, lack of specificity and sensitivity of clinical symptoms, lag time, confusion in terminology). An essential point in clinical assessment of DW is that a normal BP is at the same time the target and the crucial index of DW achievement. For this reason, a trialand‐error “probe” process has to be used at intervals to make sure that the dry weight target point is correctly estimated. The various “non clinical” methods proposed for dry weight assessment increase the complexity and the cost of hemodialysis. They are, in the present state of things, more clinical research than practice tools. They do not replace clinical judgment.     

Nonlinear Modeling of Flexible Cable Loads on Large Sheaves

Stress analysis of the components of a sheave used to transfer loads between the lift span and counterweight in a movable span bridge is investigated. Stress analysis is a requirement for properly designing such sheaves. Modeling of the mechanism of load transfer from the wire ropes to the sheave is accomplished in three ways: (1) the traditional manner using a uniform pressure distribution; (2) using a varying pressure distribution developed from belt/pulley theory; and (3) using the finite-element method with nonlinear contact elements between the wire rope and the sheave. Internal stresses in the sheave are calculated using uniform distributed pressure and a varying pressure distribution. It is determined that the load distribution on the sheave from the wire ropes is precisely the same for the nonlinear contact analysis and the belt/pulley analysis. The internal stress analysis results show that the traditional, uniformly distributed load representation is less conservative than the more realistic belt/pulley load representation. A methodology is developed that can be utilized to more accurately model the load transfer representation without the complexity of nonlinear analyses.     

Sintering Behavior and Optical Properties of Yttria

Sintering in air of a pure yttria powder was investigated on green samples shaped by slip casting. The "relative density/grain size" trajectory has been drawn and hypotheses concerning the mechanisms controlling grain growth and densification were formulated. Samples were fully densified by an additional hot isostatic pressing step on pre-sintered samples. After optimal polishing, optical properties were measured in the UV, visible, and infrared ranges.     

Morphological and stance interpolations in database for simulating bipedalism of virtual humans

We present a computer tool for testing walk hypotheses for human beings. This tool aims to generate plausible walking movements according to anatomical knowledge. To this end, we introduce an interpolation method based, on one hand, on morphological data and, on the other hand, on stance hypotheses and on footprint hypotheses. We want to test these hypotheses for application to the reconstruction of early hominid walking. We interpolate from a specific representation of the movement—a characteristic relative displacement. First, we use a motion capture system to acquire real movements of a walk cycle, and we propose to represent them by using a generic parametric model. Thus, we create a database of movements. The interpolation process produces, thanks to this database, a retargeted motion adapted to the morphology of the considered targeted skeleton. The interpolation is done according to three main hypotheses. The first concerns the reference stance, the second the lateral spacing between the feet, and the third the length of the step. In the introduction, we refer to related work. Then we propose the two following points of our method: the 3D representation of our motion representation and the multidimensional interpolation method applied to this representation. The interpolation method addresses morphological adaptation, and the use of an inverse kinematics solver addresses the computation of skeleton movements. The self-coherent validation process aims to test the coherence of the proposed method. The results propose an application to a virtual skeleton of Lucy (Australopithecus afarensis A.L. 288-1) reconstructed from real data. Finally, the relevance of the method for anthropological investigations and for animation purposes is discussed and future work is discussed with respect to the limitations of the proposed method.     

Assessing the Antimicrobial Activity of Polyisoprene Based Surfaces

There has been an intense research effort in the last decades in the field of biofouling prevention as it concerns many aspects of everyday life and causes problems to devices, the environment, and human health. Many different antifouling and antimicrobial materials have been developed to struggle against bacteria and other micro- and macro-organism attachment to different surfaces. However the “miracle solution” has still to be found. The research presented here concerns the synthesis of bio-based polymeric materials and the biological tests that showed their antifouling and, at the same time, antibacterial activity. The raw material used for the coating synthesis was natural rubber. The polyisoprene chains were fragmented to obtain oligomers, which had reactive chemical groups at their chain ends, therefore they could be modified to insert polymerizable and biocidal groups. Films were obtained by radical photopolymerization of the natural rubber derived oligomers and their structure was altered, in order to understand the mechanism of attachment inhibition and to increase the efficiency of the anti-biofouling action. The adhesion of three species of pathogenic bacteria and six strains of marine bacteria was studied. The coatings were able to inhibit bacterial attachment by contact, as it was verified that no detectable leaching of toxic molecules occurred.     

Biomonitoring of the adverse effects induced by the chronic exposure to lead and cadmium on kidney function: usefulness of alpha-glutathione S-transferase

A successful prevention of renal diseases induced by occupational exposure to lead (Pb) and/or cadmium (Cd) largely relies on the capability to detect nephrotoxic effects at a stage when they are still reversible or at least not yet compromising renal function. Hence, the aim of this cross-sectional study was to evaluate the usefulness of a set of early biological markers of oxidative stress or nephrotoxicity for the biomonitoring of workers occupationally exposed to Pb and/or Cd in a non-ferrous metal smelter, and gender, age, socioeconomic status, smoking habits, and drug use-matched control individuals. In exposed subjects, mean levels of Pb in blood and urine were also 387.1+/-99.1 microg Pb/L (1.868+/-0.478 micromol Pb/L) and 217.7+/-117.7 microg Pb/g creatinine (1.051+/-0.568 micromol Pb/g creatinine), and mean levels of Cd in blood and urine were 3.26+/-2.11 microg Cd/L (0.029+/-0.019 micromol Cd/L) and 2.51+/-1.89 microg Cd/g creatinine (0.022+/-0.017 micromol Cd/g creatinine), suggesting thereby relatively low occupational exposure levels. Statistically significant variations in zinc protoporphyrin, malondialdehyde, retinol binding protein, alpha-glutathione S-transferase, and urinary protein levels were reported between the two groups, and were closely correlated with Pb and/or Cd exposure levels. Variations in alphaGST levels were closely associated with Pb exposure. Taken together, these results suggest the use of alpha-glutathione S-transferase excretion in urine as a hallmark of early changes in the proximal tubular integrity.     

Sooting tendencies of primary reference fuels in atmospheric laminar diffusion flames burning into vitiated air

In this study, the sooting tendencies of primary reference fuels (PRFs) are measured in term of yield sooting indices (YSIs) in methane diffusion flames doped with the vapors of PRFs. The present paper represents an incremental advance complementing the original methodology prescribed by McEnally and Pfefferle. The influence of both PRF formulation and CO₂ dilution of the coflowing air on the YSIs is also assessed. The diffusion flames burning in a coflowing oxidizer stream are established over the Santoro’s burner and vapor of the liquid fuel to be investigated is injected into the fuel stream. Laser extinction measurements are performed to map the two-dimensional field of soot volume fraction in the flame. For the pure liquid hydrocarbons investigated, i.e., n-hexane, n-heptane, isooctane, and benzene, the YSI reported in the original paper by McEnally and Pfefferle quantitatively predict the sooting propensities, measured here at much higher dopant concentrations. The present study therefore extends the consistency of the YSI methodology on the Santoro’s burner. For blends of n-heptane and isooctane, the sooting tendency of doped flames exhibits regular and monotonic trends and decreases with increasing n-heptane mole fraction or CO₂ dilution. Interestingly, the evolution of YSI with the isooctane mole fraction exhibits a strong similarity for varying CO₂ mole fraction. A quadratic least-squares fit is then derived, providing a phenomenological model of YSI as a function of both isooctane mole fraction in the fuel stream and CO₂ mole fraction in the oxidizer. A non-negligible cross effect of PRF formulation and CO₂ dilution on YSI is revealed. The method elaborated within the framework of the present paper could be extended to surrogate fuels. This would help develop a comprehensive database and empirical correlations that could predict the sooting propensities of different surrogate fuels, therefore their potentially mitigationed soot production through control of fuel composition and/or exhaust gas recirculation. This database would also be useful for the validation of CFD simulations incorporating sophisticated model of soot production.     

New insights into the peculiar behavior of laminar burning velocities of hydrogen–air flames according to pressure and equivalence ratio

Hydrogen is a clean and energetic fuel, and its oxidation mechanism is a subset of the oxidation mechanisms of all hydrocarbons. Therefore, the validation of the available kinetic schemes is of great importance. In the current study, experimental measurements of laminar flame speeds and modeling studies were performed for H₂–air premixed flames over a wide range of equivalence ratios (0.5–4.0) and pressures (0.2–3 bar). The large scale in mixture and thermodynamic conditions allows a better understanding of the peculiar behavior of hydrogen flame speeds with pressure. Two very recent detailed chemical kinetic mechanisms for hydrogen combustion were selected. Excellent agreement was observed between calculations and experimental results, confirming the validity of the kinetic schemes selected. The kinetic analyses performed allow proposing an explanation for the nonmonotonic variation of hydrogen/air flame speed with pressure observed in the experiments.