Cationic polymerization of 2,4,6,8-tetramethylcyclotetrasiloxane processed by tuning the pH of the miniemulsion

The preparation of 2,4,6,8-tetramethylcyclotetrasiloxane () miniemulsions stabilized by commercial surfactants, i.e. sodium dodecylbenzenesulfonate (NaDBSA) and sodium laurate/lauric acid mixture, was studied and is first reported. Then, the pH was tuned in order to process polymerization through interfacial protonic initiation. With lauric acid, no polymerization was observed, even at high temperature or large acid contents. Such effect is ascribed to the poor dissociation and reactivity of high pKa's carboxylic acids. With NaDBSA, acidification by HCl was enough to initiate the polymerization, but the pH of the continuous phase was shown to have a strong effect on the polymerization process. Optimal conditions (at pH 5) gave chains with average number molar masses around 16,000 g mol⁻¹ and polydispersity index close to 1.6, for a total conversion in polymer of about 60% after 2 h reaction. Lower pH (4.2) quickly led to a cross-linked network whereas at higher pH (6.1), conversions were too slow (around 10% after 350 min).     

Methane calibration burner and C‐factor determination with cone calorimeter – validation of the standardized calibration protocol

The cone calorimeter is one of the major fire tests. In its reference standard ISO 5660‐1, the apparatus (and especially a characteristic of its orifice plate mass flow meter, called C‐Factor) is calibrated using a methane burner set at 5 kW. However, measurements performed in end‐use are in the range 1–10 kW. In addition, standard proposes to check linearity at 1 and 3 kW, which means in the lowest part of the range. This communication establishes the validation of the linearity on the whole range and determines the optimal condition for C‐factor determination. It justifies the technical choices of the standard. Copyright © 2014 John Wiley & Sons, Ltd.     

BRAF Modulates Stretch-Induced Intercellular Gap Formation through Localized Actin Reorganization

Mechanical forces acting on cell–cell adhesion modulate the barrier function of endothelial cells. The actively remodeled actin cytoskeleton impinges on cell–cell adhesion to counteract external forces. We applied stress on endothelial monolayers by mechanical stretch to uncover the role of BRAF in the stress-induced response. Control cells responded to external forces by organizing and stabilizing actin cables in the stretched cell junctions. This was accompanied by an increase in intercellular gap formation, which was prevented in BRAF knockdown monolayers. In the absence of BRAF, there was excess stress fiber formation due to the enhanced reorganization of actin fibers. Our findings suggest that stretch-induced intercellular gap formation, leading to a decrease in barrier function of blood vessels, can be reverted by BRAF RNAi. This is important when the endothelium experiences changes in external stresses caused by high blood pressure, leading to edema, or by immune or cancer cells in inflammation or metastasis.     

Adipose-Derived Stem Cells in the Treatment of Perianal Fistulas in Crohn’s Disease: Rationale,Clinical Results and Perspectives

Between 20 to 25% of Crohn’s disease (CD) patients suffer from perianal fistulas, a marker of disease severity. Seton drainage combined with anti-TNFα can result in closure of the fistula in 70 to 75% of patients. For the remaining 25% of patients there is room for in situ injection of autologous or allogenic mesenchymal stem cells such as adipose-derived stem/stromal cells (ADSCs). ADSCs exert their effects on tissues and effector cells through paracrine phenomena, including the secretome and extracellular vesicles. They display anti-inflammatory, anti-apoptotic, pro-angiogenic, proliferative, and immunomodulatory properties, and a homing within the damaged tissue. They also have immuno-evasive properties allowing a clinical allogeneic approach. Numerous clinical trials have been conducted that demonstrate a complete cure rate of anoperineal fistulas in CD ranging from 46 to 90% of cases after in situ injection of autologous or allogenic ADSCs. A pivotal phase III-controlled trial using allogenic ADSCs (Alofisel^®) demonstrated that prolonged clinical and radiological remission can be obtained in nearly 60% of cases with a good safety profile. Future studies should be conducted for a better knowledge of the local effect of ADSCs as well as for a standardization in terms of the number of injections and associated procedures.     

IL-33 Enhances IFNγ and TNFα Production by Human MAIT Cells: A New Pro-Th1 Effect of IL-33

Mucosal-associated invariant T (MAIT) cells represent a distinct T cell population restricted by the MHC-class-I-related molecule, MR1, which recognizes microbial-derived vitamin B2 (riboflavin) metabolites. Their abundance in humans, together with their ability to promptly produce distinct cytokines including interferon γ (IFNγ) and tumor necrosis factor α (TNFα), are consistent with regulatory functions in innate as well as adaptive immunity. Here, we tested whether the alarmin interleukin 33 (IL-33), which is secreted following inflammation or cell damage, could activate human MAIT cells. We found that MAIT cells stimulated with IL-33 produced high levels of IFNγ, TNFα and Granzyme B (GrzB). The action of IL-33 required IL-12 but was independent of T cell receptor (TCR) cross-linking. MAIT cells expressed the IL-33 receptor ST2 (suppression of tumorigenicity 2) and upregulated Tbet (T-box expressed in T cells) in response to IL-12 or IL-33. Electronically sorted MAIT cells also upregulated the expression of CCL3 (Chemokine C-C motif ligand 3), CD40L (CD40 Ligand), CSF-1 (Colony Stimulating Factor 1), LTA (Lymphotoxin-alpha) and IL-2RA (IL-2 receptor alpha chain) mRNAs in response to IL-33 plus IL-12. In conclusion, IL-33 combined with IL-12 can directly target MAIT cells to induce their activation and cytokine production. This novel mechanism of IL-33 activation provides insight into the mode of action by which human MAIT cells can promote inflammatory responses in a TCR-independent manner.     

Borago officinalis oil: Fatty acid fractionation by immobilized Candida rugosa lipase

γ-Linolenic acid (Z,Z,Z-6,9,12-octadecatrienoic acid), a very important polyunsaturated fatty acid is found in the free fatty acid fraction prepared by the hydrolysis of borage oil. Our aim was to enrich this fraction in γ-linolenic acid using selective esterification. Candida rugosa lipase was used as catalyst after immobilization on the following ion-exchange resins: Amberlite IRC50, IRA35, IRA93, and Duolite A7, A368, A568. In every case, immobilization modified the lipae’s specificity: palmitic, stearic, oleic, and linoleic acids were preferentially esterified compared to γ-linolenic acid, thus allowing a γ-linolenic acid enrichment of 3.0.     

Photoclickable Surfaces for Profluorescent Covalent Polymer Coatings

The nitrile imine‐mediated tetrazole‐ene cycloaddition reaction (NITEC) is introduced as a powerful and versatile conjugation tool to covalently ligate macromolecules onto variable (bio)surfaces. The NITEC approach is initiated by UV irradiation and proceeds rapidly at ambient temperature yielding a highly fluorescent linkage. Initially, the formation of block copolymers by the NITEC methodology is studied to evidence its efficacy as a macromolecular conjugation tool. The grafting of polymers onto inorganic (silicon) and bioorganic (cellulose) surfaces is subsequently carried out employing the optimized reaction conditions obtained from the macromolecular ligation experiments and evidenced by surface characterization techniques, including X‐ray photoelectron spectroscopy and FT‐IR microscopy. In addition, the patterned immobilization of variable polymer chains onto profluorescent cellulose is achieved through a simple masking process during the irradiation.     

3D modeling of uranium-bearing solution-collapse breccias in Proterozoic sandstones (Athabasca Basin,Canada)—Metallogenic interpretations

Unconformity-related uranium deposits are the highest grade, large tonnage uranium resources in the world. In the Athabasca Basin (northern Saskatchewan, Canada), which is the premier host for unconformity-type deposits, the ore deposits are frequently hosted and surrounded by breccias in sandstone. The significance of these breccias and their relation to mineralization are of major importance for the genesis of these high-grade deposits. Therefore, a modeling study, integrating results from structural geology and petrology, was performed with the gOcad 3D modeling software, in order to decipher geometrical and geological relationships between breccias, faults and mineralization zones. Mineralized bodies and the sudoite–dravite breccia bodies display strong spatial correlations. They appear to be controlled by reverse shear zones cross-cutting the unconformity and containing graphite in the basement. Geochemical computations evidenced that volumetric water–rock ratios up to 10,000 could be obtained in these breccia bodies for volume losses of up to 90%. Assuming reasonable values for quartz saturation, hydraulic conductivity and connected porosity, the minimal fluid volume and the time duration necessary to generate the sudoite–dravite breccia bodies were estimated at ca. 2 km³ and ca. 1 Myr, respectively. The comparison of these results with literature data suggests that the formation of sudoite–dravite breccia and mineralization could have been coeval. It may be proposed that within the space created by the quartz dissolution in the breccia body, a mixing between basement and basinal fluids could have induced U deposition and allowed the development of high-grade mineralization. The first-order uranium solubility that this coeval formation would imply is consistent with literature data, which suggests that this conceptual model is reasonable.     

Thermo-mechanical characteristics of concrete at elevated temperatures up to 310 °C

Both, the normal strength concretes (NSC) and high strength concretes (HSC) have been used in structures which may be exposed to elevated temperatures. Concretes have also been used in the construction of radiation shielding structures. Data on the behaviour of concrete at high temperature is of prime concern in predicting the constructions and safety of buildings in response to certain accidents or particular service conditions. Prediction of mechanical behaviour, thermo-mechanical deformations and moisture migration in non-uniformly heated concrete is important for safe operation of concrete containment.This paper presents the results of an experimental investigation carried out to predict the behaviour of concrete intended for nuclear applications. For this purpose, normal concrete having compressive strength of 40 MPa was designed using limestone aggregates. Cylindrical specimens (110 mm × 22 mm) were made and subjected to heating-cooling cycles at 110, 210 and 310 °C. Measurements were taken for thermal gradient, mass loss, deformations, residual mechanical properties, thermal conductivity, and porosity. This investigation developed some important data on the properties of concrete exposed to elevated temperatures up to 310 °C. Comparisons and interesting conclusions were drawn about the thermal stability at high temperature and the residual mechanical properties of the tested concrete.