Processing of CaLa2S4 infrared transparent ceramics: A comparative study of HP and FAST/SPS techniques

The densification of CaLa₂S₄ (CLS) powders prepared by combustion method was investigated by the use of Field-Assisted Sintering Technique (FAST) and Hot Pressing (HP). CLS powders were sintered using FAST at 1000°C at different pressures and heating rates and sintered by HP under 120 MPa from 800°C to 1100°C for 6 hours with a heating rate of 10°C/min. Comparison of both techniques was further realized by use of the same conditions of pressure, dwell time, and heating rate. Complementary techniques (XRD, SEM-EDS, density measurements, FTIR spectroscopy) were employed to correlate the sintering processes/parameters to the microstructural/compositional developments and optical transmission of the ceramics. Both sintering techniques produce ceramics with submicrometer grain size and relative density of about 99%. Nevertheless, HP is more suitable to densify CLS ceramics without fragmentation and also reach higher transmission than FAST. Transmission of 40%–45% was measured out of a possible maximum of 69% based on the Fresnel losses in the 8-14 μm window when HP is applied at 1000°C for 6 hours under 120 MPa. In both techniques, ceramics undergo reduction issues that originate from graphitic sintering atmosphere.     

Temperature stability of a pure metakaolin based K-geopolymer: Part 2. Variations in the mesoporous network and its rehydration stability

The thermal behavior of a model MK-based K-geopolymer was investigated between room temperature and 1400°C in order to evaluate its potentiality for high-temperature applications. The purpose of our study was to monitor the behavior of a geopolymer during a temperature rise in order to better understand its variations with respect to temperature. The works from the present paper focus only changes in the porous network; it follows a first part devoted to variations in the mineral matrix. The results obtained here show that the geopolymer material preserves its porous integrity up to 800°C, while maintaining the reversibility of water exchanges corresponding to about 25 weight percent. Together with the results of part 1, the findings of this study allow us to affirm that geopolymer materials are only very little affected by temperatures up to 800°C, or even 900°C (keeping its mesoporous amorphous structure).     

Synthesis and Anticancer Properties of Oxazepines Related to Azaisoerianin and IsoCoQuines

In this article, we report the synthesis and biological properties of a series of novel oxazepines related to isoCA-4 having significant antitumor properties. Among them, three oxazepin-9-ol derivatives display a nanomolar or a sub-nanomolar cytotoxicity level against five human cancer cell lines (HCT116, U87, A549, MCF7, and K562). It was demonstrated that the lead compound in this series inhibits tubulin assembly with an IC₅₀ value of 1 μM and totally arrests the cellular cycle in the G2/M phase at the low concentration of 5 nM in HCT116 and K562 cells. Molecular modeling studies perfectly corroborates these promising results.     

A Single Bout of Ultra-Endurance Exercise Reveals Early Signs of Muscle Aging in Master Athletes

Middle-aged and master endurance athletes exhibit similar physical performance and long-term muscle adaptation to aerobic exercise. Nevertheless, we hypothesized that the short-term plasticity of the skeletal muscle might be distinctly altered for master athletes when they are challenged by a single bout of prolonged moderate-intensity exercise. Six middle-aged (37Y) and five older (50Y) master highly-trained athletes performed a 24-h treadmill run (24TR). Vastus lateralis muscle biopsies were collected before and after the run and assessed for proteomics, fiber morphometry, intramyocellular lipid droplets (LD), mitochondrial oxidative activity, extracellular matrix (ECM), and micro-vascularisation. Before 24TR, muscle fiber type morphometry, intramyocellular LD, oxidative activity, ECM and micro-vascularisation were similar between master and middle-aged runners. For 37Y runners, 24TR was associated with ECM thickening, increased capillary-to-fiber interface, and an 89% depletion of LD in type-I fibers. In contrast, for 50Y runners, 24TR did not alter ECM and capillarization and poorly depleted LDs. Moreover, an impaired succinate dehydrogenase activity and functional class scoring of proteomes suggested reduced oxidative phosphorylation post-24TR exclusively in 50Y muscle. Collectively, our data support that middle-aged and master endurance athletes exhibit distinct transient plasticity in response to a single bout of ultra-endurance exercise, which may constitute early signs of muscle aging for master athletes.     

Comparison of methods of differentiating between fresh and frozen–thawed fish or fillets

Freezing is an efficient way of storing fish. Objectively though, it is very hard to determine whether a fish has been previously frozen. Following an appraisal of various methods, we selected a physical determination (torrymeter), a physiological examination (eye lens) and three enzymatic assays (α‐glucosidase, β‐N‐acetylglucosaminidase and β‐hydroxyacyl‐CoA‐dehydrogenase) and applied them to three species: plaice (Pleuronectes platessa), whiting (Merlangus merlangus) and mackerel (Scomber scombrus). We also compared the results obtained following slow and rapid freezing and investigated how spoilage affects the torrymeter measurements and α‐glucosidase assay values. For whole fish the physical method using the torrymeter is a reliable indicator. For fish fillets we recommend the enzymatic method using the α‐glucosidase assay, which should be accompanied by measurement of the freshness to avoid confusing a frozen–thawed fish and a fish in an advanced stage of spoilage. The values noted for fresh and thawed whiting and plaice indicated cut‐off values of 0.15 for whiting and 0.5 for plaice, above which it can be asserted that the sample had been frozen. © 2002 Society of Chemical Industry     

Borago officinalis oil: Fatty acid fractionation by immobilized Candida rugosa lipase

γ-Linolenic acid (Z,Z,Z-6,9,12-octadecatrienoic acid), a very important polyunsaturated fatty acid is found in the free fatty acid fraction prepared by the hydrolysis of borage oil. Our aim was to enrich this fraction in γ-linolenic acid using selective esterification. Candida rugosa lipase was used as catalyst after immobilization on the following ion-exchange resins: Amberlite IRC50, IRA35, IRA93, and Duolite A7, A368, A568. In every case, immobilization modified the lipae’s specificity: palmitic, stearic, oleic, and linoleic acids were preferentially esterified compared to γ-linolenic acid, thus allowing a γ-linolenic acid enrichment of 3.0.     

Synthesis and characterization of the polyols by air oxidation of soybean oil and its effect on the morphology and dynamic mechanical properties of poly(vinyl chloride) blends

The use of natural additives, with low toxicity and good compatibility, for PVC is becoming increasingly attractive. In this study, soybean oil additives were prepared by air oxidation reactions and blending with PVC. The oxidation reaction produced a significant increase in the number of hydroxyl groups in soybean oil; however, this kind of reaction results in the formation of a heterogeneous structure due to free radical reactions in the medium. The oxidized soybean oil improved the compatibility with PVC due to an increase in the number of polar groups, such as hydroxyls, and thus a reduction in the amount of atactic polymer was observed. Furthermore, an increase in the molecular weight of the oxidized oil, as well as large amounts of polar groups contributes to reducing the migration of oil in the PVC. Regarding the crystallinity of PVC, the use of pure and oxidized soybean oil causes small changes in the crystalline phase of the polymer. Oxidized soybean oil has great potential for usage as a secondary plasticizer for PVC. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42102.     

Operational transfer path analysis

One of the tools used to study the NVH behaviour of a system is the transfer path analysis. It aims to identify the operational forces and the propagation paths of the vibrations and is especially interesting in the case when the system is composed of different subsystems. The classical techniques identify the transfer paths when the system is disassembled. This way one eliminates flanking transfer paths. Yet it is very time-consuming and the boundary conditions are not correct anymore. The presented method makes it possible to identify the transfer paths without disassembling the system. The advantages are that the overall testing time is reduced and that the real boundary conditions are present. In this article the theory will be reviewed and it will be validated using data generated by finite element simulations.     

Wheat gluten-coated papers for bio-based food packaging: Structure,surface and transfer properties

The objective of the present work was to understand how the structural, surface, water vapour and gas barrier properties of wheat gluten (WG) coated paper could be influenced by the features of paper. For this purpose, a surface treated paper (TP) and an untreated paper (UTP) were compared. Penetration of WG-coating into the bulk of paper was more pronounced in UTP than TP. This led to the formation of a significant junction zone resulting in an interpenetrated structure for WG–UTP, suggesting a composite-like structure, while a bi-layer one was obtained for WG–TP. Differences in WG penetration were related to the hydrophilicity, roughness and porosity of the paper used. Even though the extent of penetration did not greatly affect the surface properties (water and oil resistance), the transfer properties (water vapour, O₂ and CO₂) of WG-coated papers were significantly improved when WG-coating highly penetrated: while the WG–TP behaved as a micro-perforated material, the WG–UTP behaved as WG-film.