Experimental determination of effective moisture diffusivities of whole- and cut-rosehips in convective drying

Average effective moisture diffusivities for both the whole- and cut-rosehips were obtained during convective drying. The effects of process variables such as air temperature, air velocity and air absolute humidity on effective moisture diffusivity were studied. The average effective moisture diffusivity in rosehip ranged between 1.45 × 10^?10 and 10.3 × 10^?10 m²/s for whole-rosehip and between 1.44 × 10^?9 and 5.13 × 10^?9 m²/s for cut-rosehip at the temperatures studied. Activation energies for convective drying were found to be 62 kJ/mol for whole-rosehips and 58 kJ/mol for cut-rosehips.     

Frequency response of thin film heads with longitudinal andtransverse anisotropy

A transmission surface model (TSM) that analyzes the conduction of flux by rotation and wall motion is reported. It has been used to quantitatively compare the predicted performance of thin-film heads with longitudinal and transverse magnetic anisotropy. The TSM analysis predicts that a transversely oriented type of thin-film head can be operated at much higher frequencies than a longitudinally oriented head. In addition, its group delay dispersion is much less. Finally, its susceptibility to wall pinning is an order of magnitude less. Therefore, it is concluded that the traditional aversion of head designers to the longitudinal orientation is justified for frequencies above several megahertz     

One step densification of SDC—Na2CO3 nano-composite electrolytes for SOFC applications by cold sintering process

Sm_0.2Ce_0.8O_1.9- 30% Na₂CO₃ (Sm doped ceria (SDC)-30N) nano-composite electrolytes were densified in a single step via cold sintering process (CSP). At 200°C and 450 MPa of uniaxial pressure, samples up to 97% of their theoretical density could be obtained. The effect of processing parameters, such as temperature, uniaxial pressure, processing duration, and moisture content, on the densification of the nano-composite electrolytes was investigated. The thermal, microstructural, and electrical properties of nano-composites were investigated by differential scanning calorimetry, X-ray diffractometer, scanning electron microscope, and EIS analysis. SDC crystallite sizes were found to be around 25 nm, barely coarsened after CSP by which the true nano nature of the nano-composite could be preserved. Because, by conventional processing high density values could not be attained and high processing temperatures in excess of 600°C had to be used, promoting particle coarsening. The highest total electrical conductivity was found to be 2.2 × 10⁻² S cm⁻¹ at 600°C, with an activation energy of 0.83 eV for SDC-30N nano-composites. The present investigation revealed that the implementation of cold sintering technique resulted in significant enhancements in the densification of nano-composite electrolytes, thereby rendering them suitable for efficient utilization in SOFC applications, as compared to the conventional production methods.     

Microstructure and densification of ZrB2–SiC composites prepared by spark plasma sintering

ZrB₂–SiC composites were prepared by spark plasma sintering (SPS) at temperatures of 1800–2100 °C for 180–300 s under a pressure of 20 MPa and at higher temperatures of above 2100 °C without a holding time under 10 MPa. Densification, microstructure and mechanical properties of ZrB₂–SiC composites were investigated. Fully dense ZrB₂–SiC composites containing 20–60 mass% SiC with a relative density of more than 99% were obtained at 2000 and 2100 °C for 180 s. Below 2120 °C, microstructures consisted of equiaxed ZrB₂ grains with a size of 2–5 μm and α-SiC grains with a size of 2–4 μm. Morphological change from equiaxed to elongated α-SiC grains was observed at higher temperatures. Vickers hardness of ZrB₂–SiC composites increased with increasing sintering temperature and SiC content up to 60 mass%, and ZrB₂–SiC composite containing 60 mass% SiC sintered at 2100 °C for 180 s had the highest value of 26.8 GPa. The highest fracture toughness was observed for ZrB₂–SiC composites containing 50 mass% SiC independent of sintering temperatures.     

Wear and friction behavior of metal impregnated microporous carbon composites

Metal-matrix composites have been prepared by pressure-infiltration casting of copper-base alloy melts into microporous carbon preforms. The carbon preforms contained varying proportions of amorphous carbon and graphite. Load dependence of the wear and friction behavior of the composite pins has been examined under ambient conditions against cast-iron plates, using a pin-on-plate reciprocating wear tester. The wear resistance of the composite is significantly improved, as compared with the base alloy. Contrary to the normally expected behavior, the addition of graphite to the amorphous carbon does not reduce the friction coefficient, especially at high loads. The wear and friction behavior of the composites is very sensitive to the size and distribution of the microstructural constituents.     

Neural Models for the Resonant Frequency of Electrically Thin and Thick Circular Microstrip Antennas and the Characteristic Parameters of Asymmetric Coplanar Waveguides Backed with a Conductor

Neural models for computing the resonant frequency of electrically thin and thick circular microstrip antennas, based on the multilayered perceptrons and the radial basis function networks, are presented. Five learning algorithms, delta-bar-delta, extended delta-bar-delta, quick-propagation, directed random search and genetic algorithms, are used to train the multilayered perceptrons. The radial basis function network is trained according to its learning strategy. The resonant frequency results of neural models are in very good agreement with the experimental results available in the literature. In this paper, the characteristic impedance and the effective permittivity of the asymmetric coplanar waveguide backed with a conductor are also computed by using only one neural model trained by the backpropagation with momentum and the extended delta-bar-delta algorithms. When the performances of neural models are compared with each other, the best results for test are obtained from the multilayered perceptrons trained by the extended delta-bar-delta algorithm.     

The interleukin-10 promoter genotype predicts diastolic dysfunction in maintenance hemodialysis patients

Interleukin-10 (IL-10) predominantly acts as an anti-inflammatory factor. Polymorphisms in the IL-10 gene promoter determine quantitative cytokine production. Doppler echocardiography and tissue Doppler imaging (TDI) are superior to conventional echocardiography to evaluate diastolic dysfunction. The IL-10 gene promoter polymorphism at position (-1082) was studied for its association with conventional and Doppler echocardiographic and TDI parameters in 112 hemodialysis (HD) patients. Blood pressure, serum C-reactive protein (CRP), and albumin levels were also examined for the association study. The genetic association study showed that among the HD patients, there was no difference in the prevalence of systolic and diastolic dysfunction between genotypes on conventional echocardiography. However, using Doppler echocardiography and TDI, high producers for the IL-10 -1082 promoter (-1082/GG) have higher E velocities, E/A values, lateral, and septal E' velocities and a lower isovolumic ventricular relaxation time than low (-1082/AA) and intermediate producers (-1082/GA). Significantly higher levels of serum CRP levels and lower plasma albumin levels were found in low and intermediate producers for the IL-10 -1082 promoter than high producers. The IL-10 genotype may balance the effects of inflammatory cytokines on the myocardium and may be a determinant of LV function in HD patients.     

Effects of the time dependence of a bioluminescent source on the tomographic reconstruction

There are two goals in this simulation study: (1) to show that the time variation of the bioluminescence source can cause artifacts in the tomographic images such that quantification and localization becomes impossible; and (2) to show that the a priori knowledge of the light kinetics can be used to eliminate these artifacts. These goals are motivated by the fact that the half-life of luciferase has been reported as 30 min to 2 h in vivo. We perform two-dimensional simulations. We consider a 40 mm diameter circular region with an inclusion of 6 mm diameter located 10 mm away from the center. The measurement data is simulated using a finite-element-based forward solver. We model the noncontact measurements such that four-wavelength data is collected from four 90 degrees apart views. The results show that the ratio of the total imaging time to the half-life of the exponentially decaying bioluminescent source is the deciding factor in the reconstruction of the source. It is also demonstrated that a priori knowledge of the source kinetics is required to perform tomographic bioluminescence imaging of short half-life bioluminescent sources and the use of spatial a priori information alone is not adequate.     

Effect of oxygen partial pressure on the microstructural and physical properties on nanocrystalline tin oxide films grown by plasma oxidation after thermal deposition from pure Sn targets

In this work, microstructural and physical properties were studied in the tin oxide films deposited by thermal evaporation of Sn films on stainless steel substrates followed by in situ D.C. plasma oxidation at 200 °C substrate temperature. The surface properties were studied by scanning electron microscopy, X-ray diffraction, atomic force microscopy and four-point probe electrical resistivity. The typical calculated grain size of the films deposited by thermal evaporation was between 28 nm and 66 nm and the texture structure was found to be dependent on the thermal deposition pressure. A cassiterite structure of SnO₂ was produced by D.C. plasma oxidation with the main diffraction peaks of the (101), (200), (211), (310) and (221) planes at the 25% and 50% O₂ partial pressure conditions. However, at 12.5% O₂ partial pressure oxidation conditions, amorphous tin oxide structure and crystalline SnO phases were detected. Increasing thermal deposition pressure resulted in preferential texture formation at (211) and (310) planes. The surface structure investigation of the produced films by SEM and AFM studies showed large SnO₂ islands with approximately 1.0 μm and 1.5 μm sized nodules, and they are called as grape-like structures. The grape-like grains possess nano grains, which are between 20 nm and 30 nm in diameter calculated by Scherer's formula. The grape-like grains were seen to be separated by large cavities and the size of these cavities and nano grains was seen to be larger when the O₂ partial pressure is increased. The four-point probe resistivity of the films, grown at different oxidation temperatures, decreased with the increase in oxygen partial pressure. The values of resistivity for SnO₂ phase were measured as low as 10⁻⁵ Ω-cm and observed to decrease with increasing thermal deposition pressure and oxygen partial pressure.