Multiple-wavelength integration in InGaAs-InGaAsP structures using pulsed laser irradiation-induced quantum-well intermixing

In this paper, we present the characteristics of a quantum-well intermixing technique using pulsed-photoabsorption-induced disordering. Photoluminescence, micro-Raman spectroscopy, and transmission electron microscopy were used to characterize the process. Using this technique, a differential wavelength shift between the intermixed and nonintermixed regions of over 160 nm has been observed from InGaAs-InGaAsP heterostructures. It was found from the micro-Raman measurements that a spatial resolution of better than 2.5 /spl mu/m can be achieved. A theoretical model has been developed to estimate the spatial resolution limit. Theoretical analysis has also been performed to investigate the effect of laser irradiation on the degree of intermixing in InGaAs-InGaAsP structures. To verify the capability of this process in monolithic photonic integration, high-quality bandgap tuned lasers, two-section extended cavity lasers, and multiple-wavelength laser chips have been fabricated.     

A MAC Protocol for Multimedia Traffic in Slotted CDMA Wireless Communication Systems

In this paper, a media access control (MAC) protocol is proposed for multimedia traffic in slotted CDMA wireless communication systems. The channel resource is partitioned into four compartments: video, voice and data compartments, and common resource pool (CRP) which can be used by either voice or data. Video is only permitted to use its pre-allocated channels. Besides assigning voice to its own compartment, a threshold type decision policy is introduced to regulate voice call admission control in CRP. Data can use not only data and CRP compartments, but also the idle capacity of both video and voice. The proposed protocol provides a simple and flexible resource allocation decision for the multimedia traffic such that the bandwidth can be utilized efficiently while satisfying the quality of service (QoS) requirement for each traffic category. Two mathematical analysis methods are applied to evaluate the system performance. The first, Traditional Markov Analysis (TMA) is used to calculate the video and the voice blocking probabilities, and the second, Transient Fluid Analysis (TFA) is adopted to evaluate the average data delay and the channel utilization. Computer simulations verify the accuracy of mathematical models.Miao Ma received the B.Eng. and M.Eng. degrees in Electrical Engineering from Harbin Institute of Technology, China in 1992 and 1996, respectively, and the Ph.D degree in Electrical and Electronic Engineering from Nanyang Technological University, Singapore in 2003. She is a research scientist in the Institute for Infocomm Research in Singapore. Her research interests include network security, media access control, wireless communications and computer networking.Erry Gunawan received the B.Sc. degree in electrical and electronic engineering from the University of Leeds, U.K., in 1983 and the M.B.A. and the Ph.D. degrees, both from Bradford University, in 1984 and 1988, respectively. From 1984 to 1988, he was a Satellite Communication System Engineer at Communication Systems Research Ltd., Ilkley, U.K. In 1988, he moved to Space Communication (SAT-TEL) Ltd, Northampton, U.K. He joined the School of Electrical and Electronic Engineering, Nanyang Technological University, Singapore, in 1989, and currently, he is an Associate Professor in the same school. His research interests include the fields of digital communications, mobile and satellite communications, error coding, and spread spectrum. He has published over 60 international research papers and has been a consultant to a local company on the study of DECT system and BLUETOOTH.     

Multi-objective robust optimization using a sensitivity region concept

In multi-objective design optimization, it is quite desirable to obtain solutions that are multi-objectively optimum and insensitive to uncontrollable (noisy) parameter variations. We call such solutions robust Pareto solutions. In this paper we present a method to measure the multi-objective sensitivity of a design alternative, and an approach to use such a measure to obtain multi-objectively robust Pareto optimum solutions. Our sensitivity measure does not require a presumed probability distribution of uncontrollable parameters and does not utilize gradient information; therefore, it is applicable to multi-objective optimization problems that have non-differentiable and/or discontinuous objective functions, and also to problems with large parameter variations. As a demonstration, we apply our robust optimization method to an engineering example, the design of a vibrating platform. We show that the solutions obtained for this example are indeed robust.     

A mechanistic study into the reactions of ammonium nitrate with pyrite

The reaction of ammonium nitrate with pyrite was studied using a simultaneous differential scanning calorimetry and thermogravimetric analyser (TGA/DSC). When a mixture of pyrite and ammonium nitrate is heated at a constant heating rate of from room temperature to , two exothermic reactions occur at about 200 and , respectively. The first exothermic reaction is considered to take place between ammonium nitrate and pyrite where NO, NH₃, SO₂ and N₂O gases are produced. The second exothermic reaction is due to the oxidation of the remaining pyrite by atmospheric oxygen. Based on the quantitative analysis of the gaseous and solid products of the reaction, a new overall reaction is proposed at the first exothermic peak of interest, which is thermodynamically favourable. The results have significant implication in the understanding of stability of ammonium nitrate-based industrial explosives in reactive mining grounds containing pyritic minerals.     

The Role of Autophagy in Chemical Proteasome Inhibition Model of Retinal Degeneration

We recently demonstrated that chemical proteasome inhibition induced inner retinal degeneration, supporting the pivotal roles of the ubiquitin–proteasome system in retinal structural integrity maintenance. In this study, using beclin1-heterozygous (Becn1-Het) mice with autophagic dysfunction, we tested our hypothesis that autophagy could be a compensatory retinal protective mechanism for proteasomal impairment. Despite the reduced number of autophagosome, the ocular tissue morphology and intraocular pressure were normal. Surprisingly, Becn1-Het mice experienced the same extent of retinal degeneration as was observed in wild-type mice, following an intravitreal injection of a chemical proteasome inhibitor. Similarly, these mice equally responded to other chemical insults, including endoplasmic reticulum stress inducer, N-methyl-D-aspartate, and lipopolysaccharide. Interestingly, in cultured neuroblastoma cells, we found that the mammalian target of rapamycin-independent autophagy activators, lithium chloride and rilmenidine, rescued these cells against proteasome inhibition-induced death. These results suggest that Becn1-mediated autophagy is not an effective intrinsic protective mechanism for retinal damage induced by insults, including impaired proteasomal activity; furthermore, autophagic activation beyond normal levels is required to alleviate the cytotoxic effect of proteasomal inhibition. Further studies are underway to delineate the precise roles of different forms of autophagy, and investigate the effects of their activation in rescuing retinal neurons under various pathological conditions.     

The application of polyimide/silicon nitride dual passivation to AlxGa1−xN/GaN high electron mobility transistors

PECVD silicon nitride passivation is quite frequently done at the end of AlGaN/GaN HEMT fabrication before substrate back-side lapping. However, the PECVD silicon nitride process is likely to produce pinholes in the passivation film. A very thick PECVD silicon nitride film may produce mechanical stress on the underlying device. Polyimide passivation has also been known to be effective for AlGaN/GaN HEMT and it can also serve as a stress buffer. However, polyimide can take up water while PECVD silicon nitride is a good diffusion barrier for water, etc. Thus it is expected that a dual PECVD silicon nitride/polyimide passivation will be a better choice than just a single layer of PECVD silicon nitride or polyimide. In this paper, we will demonstrate the application of a dual PECVD silicon nitride/polyimide passivation to AlGaN/GaN HEMT process.     

High performance wire‐array silicon solar cells

Nano/micro‐wire silicon solar cells, consisting of wire‐arrays of radial p–n junction structures, are expected to offer performance enhancement at lower costs, using smaller volumes of low carrier lifetime, cheaper silicon. Using inexpensive microsphere‐lithography‐based fabrication that is scalable to large areas, we have demonstrated wire‐array solar cells that outperform the control cell. Key to the design of these cells is the impact of various parameters, such as wire diameter and junction depth, that influences the competing effects of light trapping ability of the wire‐array, quantum efficiency, and series resistance of the resulting device. Using capacitance measurements we can identify two possible types of junction structure in a wire‐array solar cell: radial and planar. We show that the former is the prerequisite for performance‐enhancing wire‐array solar cells. Copyright © 2010 John Wiley & Sons, Ltd.     

Performance of DS/CDMA-based equatorial LEO satellite system usingturbo-codes

Improving the bit error rate (BER) performance at low elevation angles is a crucial determining factor for the capacity of any low earth orbit (LEO) satellite system. In previous work, it has been demonstrated that the BER performance of a DS/CDMA-based equatorial LEO satellite system on a downlink can be improved significantly by using satellite diversity. The authors address the issue of improving BER at low elevation angles by using turbo codes     

Performance study of close-loop power control algorithms for acellular CDMA system

Performance of a reverse link code-division multiple-access (CDMA) system with fast close-loop power control algorithms is studied. It is found that if the fast close-loop power control algorithm functions effectively, the speed of the mobile unit is in the range such that its Doppler frequency is less than one tenth of the power control updating rate. This paper also proposes a new predictive power control algorithm with better performance in terms of system capacity than the conventional and adaptive step size algorithms. An increase in system capacity as high as 22% compared with the conventional algorithm can be achieved depending on the mobile velocity     

Application of Reproducing Kernel Hilbert Spaces to a Minimization Problem with Prescribed Nodes

The theory of reproducing kernel Hilbert spaces is applied to a minimization problem with prescribed nodes. We re-prove and generalize some results previously obtained by Gunawan et al. [2,3], and also discuss the Hölder continuity of the solution to the problem.