Regional valuation of infrastructure and transport attributes for Swedish road freight

Is it possible to identify regional differences among shippers in their valuation of infrastructure improvements? In this study, the question is analysed using a random utility approach, where parameters are estimated by a logit model. Data consist of a Swedish stated-preference study from 1992. The results indicate that regional differences exist, but that a considerable heterogeneity in the empirical data means that in some cases the results are not robust. However, when industrial mix, shipping distance, and goods values are held constant, the analysis still indicates the existence of regional differences. Independently of the limitations in the results, the study has implications for any infrastructure benefit analysis where parameters from spatial averages are used. The results are based on short-term decisions, and one should recognise that parameters may vary in the mid- and long-term. Received: May 1999/Accepted: March 2001     

Laboratory examination of anisotropy in the foliation plane of metamorphic rocks

Mechanical testing and ultrasonic measurements were used to establish the properties of metamorphic rocks in different directions of the foliation plane. Tests were undertaken on 42 mm diameter specimens cored at right angles to the foliation of gneissic rocks from southwest Sweden. Ultrasonic and tensile testing was carried out in three diametral directions and the data for each direction were compared. Coefficients, failure load anisotropy and velocity anisotropy were obtained. An anisotropy coefficient of 3% was detected by ultrasonic measurements, while the Brazilian tests indicated 15%. The study has shown that an anisotropy coefficient of the foliation plane is present, albeit small. Electronic Publication     

Metal contamination at a wood preservation site: characterisation and experimental studies on remediation

The aim of this investigation was to determine the occurrence of As, Cu, Cr and Zn in the soil at an abandoned wood preservation unit and to examine some possible extractants for the contaminants in the soil. The mean As content of the contaminated surface soils (0-10 cm) was 186 mg kg(-1), where as the mean concentrations of Cu, Cr and Zn in soils from the contaminated area were 26, 29 and 91 mg kg(-1), respectively. The elevated As content in the mineral soils is related to adsorption of inorganic As phases in the fine grained fractions, which are characterised by large surface area and high positive surface charge under the current acidic conditions. Cu and Cr were found to be rather mobile, which is reflected in their lower abundance in soils and significant accumulation in sediments in the drainage leaving the area. The fine fraction of the soil (<0.125 mm) has an average metal content increased by nearly 34% as compared to the <2-mm fraction conventionally used for the analysis and assessment of soil contamination. The <2-mm fraction constitutes approximately 65% of the total weight while the fine fraction (<0.125 mm) constitutes approximately 10%. These facts, taken together, are essential for the choice of remediation measures. Oxalate solutions have been tested as extractants for soil remediation. Dark acid oxalate extraction dissolves the amorphous Al- and Fe-oxides and hydroxides and mobilises the adsorbed inorganic As species. Oxalate also acts as a ligand for the cationic heavy metals, releasing them from exchangeable sites. With a three-step sequential leaching, up to 98-99% of the metals could be removed. At lower concentrations and higher pH, the leaching decreased to approximately 70%.     

Testing tubewell platform color as a rapid screening tool for arsenic and manganese in drinking water wells

A low-cost rapid screening tool for arsenic (As) and manganese (Mn) in groundwater is urgently needed to formulate mitigation policies for sustainable drinking water supply. This study attempts to make statistical comparison between tubewell (TW) platform color and the level of As and Mn concentration in groundwater extracted from the respective TW (n = 423), to validate platform color as a screening tool for As and Mn in groundwater. The result shows that a black colored platform with 73% certainty indicates that well water is safe from As, while with 84% certainty a red colored platform indicates that well water is enriched with As, compared to WHO drinking water guideline of 10 μg/L. With this guideline the efficiency, sensitivity, and specificity of the tool are 79%, 77%, and 81%, respectively. However, the certainty values become 93% and 38%, respectively, for black and red colored platforms at 50 μg/L, the drinking water standards for India and Bangladesh. The respective efficiency, sensitivity, and specificity are 65%, 85%, and 59%. Similarly for Mn, black and red colored platform with 78% and 64% certainty, respectively, indicates that well water is either enriched or free from Mn at the Indian national drinking water standard of 300 μg/L. With this guideline the efficiency, sensitivity, and specificity of the tool are 71%, 67%, and 76%, respectively. Thus, this study demonstrates that TW platform color can be potentially used as an initial screening tool for identifying TWs with elevated dissolved As and Mn, to make further rigorous groundwater testing more intensive and implement mitigation options for safe drinking water supplies.     

Assessing physical activity in the daily life of cystic fibrosis patients

Physical Activity (PA) plays an important role in the health and quality of life of cystic fibrosis (CF) patients, but little is known about their PA in daily living. With the use of accelerometers it is now possible to monitor activity profiles in detail. The goals of this study are to assess feasibility and acceptance of a longer-term use of accelerometers in daily living in CF patients, study the possibility of detecting changes in PA in relation to the patients’ clinical state and compare the findings between a CF and an age-matched healthy control group. We asked 15 CF patients to wear two accelerometers for 21 days and fill in a diary. Ten of them (age 21 to 40, mean 29.5 years) participated and delivered data that could be evaluated. We also recruited 10 age-matched control subjects. Data was processed for calculating usage time and features extracted to construct models of activity. The younger patients, particularly females, were concerned with fashion and style and considered wearing the sensors a challenge. Overall, the compliance of patients with CF seemed to be lower than reported for elder subjects in the literature. Time-series analysis of the data indicated characteristic patterns of PA over time, provided that data pre-processing and noise-filtering had been optimized. Further studies have to assess whether the continuous recording of PA yields additional clinical information in CF and in particular, whether it is possible to detect or even predict exacerbations in patients with CF or other diseases.     

A process model for robotic disc grinding

Automation of deburring and cleaning of castings is desirable for many reasons. The major reasons are dangerous working conditions, difficulties in finding workers for cleaning sections, and improved profitability. A suitable robot cell capable of using different tools, such as cup grinders, disc grinders and rotary files, is the solution. This robot should be completed with sensors in order to keep the quality of the cleaned surface at an acceptable level. Although using sensors simplifies both the programming and quality control there are still other problems that need to be solved. These involve selection of machining data, e.g. feeding rate and grinding force in a force controlled operation based on parameters such as tool type, disc grinder and geometry. In order to decrease the programming time, a process model for disc grinders has been developed. This article investigates this process model and pays attention to problems such as wavy or burned surfaces and the effect of a robot's repetition accuracy in the results obtained. Many aspects treated in this article are quite general, and can be applied in other types of grinding operations.     

A Molecular Perspective on the d-Band Model: Synergy Between Experiment and Theory

The d-band model of Hammer and Nørskov (Nature 376:238, 1995 [3]) relating adsorption energies to the d-band position, and the adsorption energies to barriers in catalytic reactions, has been extremely successful in predicting reactivities and catalysts. In the present contribution we review recent combined experimental and theoretical work on chemical bond-formation at surfaces. We focus on the adsorbate and how the adsorbate electronic structure can be rehybridized through mixing with unoccupied states to generate the radical state, real or virtual, that can then form electron pairs with the metal d-states, as described by the d-band model. We discuss five important bonding situations: (i) atomic radical, (ii) diatomics with unsaturated π-systems (Blyholder model), (iii) unsaturated hydrocarbons (Dewar–Chatt–Duncanson model), (iv) lone–pair interactions, and (v) saturated hydrocarbons (physisorption). Where the d-band model predicts trends along the series of transition metals, the present work provides intuitive tools for predicting trends among different adsorbates.