Crosslinked quaternized poly(arylene ether sulfone) copolymer membrane applied in an electric double-layer capacitor for high energy density

The low energy density of supercapacitors, especially supercapacitors based on aqueous electrolytes, is the main factor limiting their application, and the energy density is closely related to the operating potential window of the supercapacitor. The polymer electrolyte is the main contributor to the safe operation and good ion conductivity of the supercapacitor. In this study, a crosslinked quaternized poly(arylene ether sulfone) (PAES) membrane was prepared via crosslinking during membrane formation with a thermal-only treatment and applied in an electric double-layer capacitor (EDLC). The pre-prepared PAES membrane formed a polymer electrolyte with 1 mol/L Li₂SO₄ and was then fabricated into an EDLC single cell. The properties of both the membrane and ELDC were investigated. The preferred cPAES-N-0.2 polymer electrolyte showed an ionic conductivity of 1.18 mS/cm. The optimized EDLC exhibited a single-electrode gravimetric capacitance of 104.92 F/g at a current density of 1.0 A/g and a high operating potential window (1.5 V); it, thereby, achieved a high energy density of 8.20 W h/kg. The EDLC also exhibited excellent cycling properties over 3000 charge–discharge cycles. The crosslinked structures promoted the tensile strength and thermal stability of the PAES membranes; this was accompanied by a slight decrease in the ionic conductivity. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47759.     

基于中压加氢改质方案的炼油流程协同优化

中国石化北京燕山分公司(简称燕山分公司）为增产高附加值产品、提升效益，对炼油系统进行了流程协同优化。中压加氢裂化装置掺炼催化裂化柴油，由加氢裂化方案改为加氢改质方案运行，将改质柴油送入三号催化裂化装置（简称三催化装置）的提升管进行回炼；同时，将焦化蜡油改入加氢裂化装置进行加工，而蜡油加氢装置不再加工焦化蜡油以改善催化裂化原料。协同优化后，中压加氢改质装置的柴油产品十六烷值提高7个单位；三催化装置的液化气收率提高1.96百分点，汽油收率增加0.88百分点，总液体收率增加2.28百分点；高压加氢裂化装置喷气燃料产品的密度（20 ℃）降低至806 kg/m3，烟点为23.8 mm，尾油BMCI由11.8降低至10.8；蜡油加氢装置精制蜡油的饱和分质量分数提高4.68百分点，芳香分质量分数降低5.96百分点，氮质量分数降低0.06百分点，使催化裂化原料性质得以改善。通过将中压加氢改质装置的喷气燃料馏分抽出送催化裂化装置回炼，与回炼改质柴油相比，催化裂化汽油的研究法辛烷值（RON）增加1.0个单位，改质柴油十六烷值提高4.8个单位。通过全炼油板块系统性优化，燕山分公司车用柴油产品的十六烷值由53.5降低至51.5，解决了质量过剩问题。     

一种高精度的非平稳随机信号实时建模算法研究

针对传统的非平稳随机信号时变参数筹分模型算法的不足,论文把非平稳随机信号时变参数差分模型与一种带自适应遗忘因子的RLS算法结合起来,形成一种有效的非平稳随机信号实时建模算法,仿真分析表明该算法不仅能获得快的收敛速度而且能获得高的建模精度。     

"十一五"规划国家级重点通信项目

《信息产业科技发展“十一五”规划》提出设立部分重大项目,力争实现重点突破,形成一批具有自主知识产权的核心技术和创新产品,打造较为完整的产业链,形成世界一流的产业群。这其中,与通信相关的重点项目主要有:宽带无线移动通信、下一代网络、家庭网络、智能终端、数字电视等。本部分将对我国在以上领域的现状、项目的具体内容和目标、实现这些目标的具体计划以及相关厂商在各领域的努力和成绩进行介绍。     

用CMOS工艺实现非接触IC卡天线的集成化设计

论述了用CMOS工艺实现非接触式IC卡天线的集成化需要考虑的各个方面,建立了集成天线的模型,给出了合理的设计方案,并通过实验验证了模型和设计方案.实验结果表明,采用片上天线完全可以提供非接触式IC卡工作所需要的能量.在频率为2 2 .5 MHz、感应强度为6×10 - 4 T的磁场中,面积为2 m m×2 mm的集成天线可以为10 kΩ的负载提供1.2 2 5 m W的能量.     

Monte Carlo simulation of gas phase polymerization of 1,3‐butadiene. Part II: Kinetics optimization and confirmation

Studies on the deactivations and initiations of gas phase polymerizations of 1,3‐butadiene have been achieved by Monte Carlo simulation. Initiation and deactivation control the reaction before and after the peak of the polymerization rate, respectively. The influence of polymerization temperature has been studied. Monte Carlo modeling of polymerization kinetics and mechanism was confirmed by the agreement of experimental data and simulation results of polymerizations run with a temporary evacuation of monomer. The balance of catalysts and active chains is established by both initiation and chain transfer reactions with cocatalyst, which causes a ‘pseudo‐stability’ stage. © 2003 Society of Chemical Industry     

基于网格技术的下一代电信网络架构与运作模式

首先详细介绍了基于网格技术的下一代电信网络架构及其应用．然后探讨了在此基础上的新运营模式．并讨论了引入网格技术对电信运营模式的影响。     

斜拉索-磁流变阻尼器系统半主动控制的神经网络法

磁流变阻尼器具有良好的可变阻尼特性，能用于结构的半主动控制。针对斜拉桥拉索-磁流变阻尼器系统，本文提出了利用神经控制器进行半主动控制的神经网络法，该神经控制器根据过去时刻的加速度响应和控制信号预测下一时间步的控制信号，并给出了训练方法及开展了数值仿真研究。仿真结果显示，采用神经网络半主动控制能取得很好的减振效果，证明该方法是可行的。     

燕皮传统加工工艺中碱液对肉糜特性的影响

燕皮是以猪肉和甘薯粉为原料,手工制成的薄如纸且经煮不烂的传统食品。在传统制作燕皮过程中添加山榉灰配制的碱液是影响肉糜品质的关键步骤。通过测定制作燕皮过程中各工序样品的氮溶解指数、持水性、乳化稳定性、pH值和粘度,利用SDS-PAGE分析样品中的蛋白质组分、利用光学显微镜观察它们的结构变化,证实植物碱液能够提高样品的氮溶解指数、持水性和乳化稳定性并且延迟了肉糜硬化。同时实验证明碳酸碱(Na2CO3或K2CO3)可替代传统工艺中的植物碱,为后续标准化、工业化生产提供可行条件。     

Unicast-based multicast communication in wormhole-routed networks

Multicast communication, in which the same message is delivered from a source node to an arbitrary number of destination nodes, is being increasingly demanded in parallel computing. System supported multicast services can potentially offer improved performance, increased functionality, and simplified programming, and may in turn be used to support various higher-level operations for data movement and global process control. This paper presents efficient algorithms to implement multicast communication in wormhole-routed direct networks, in the absence of hardware multicast support, by exploiting the properties of the switching technology. Minimum-time multicast algorithms are presented for n-dimensional meshes and hypercubes that use deterministic, dimension-ordered routing of unicast messages. Both algorithms can deliver a multicast message to m-1 destinations in [log ₂ m] message passing steps, while avoiding contention among the constituent unicast messages. Performance results of implementations on a 64-node nCUBE-2 hypercube and a 168-node Symult 2010 2-D mesh are given