The aqueous polymerization of acrylamide initiated by potassium permanganate/β-hydroxybutyric acid has been studied volumetrically at 35 ± 0.01°C in an inert medium. The rate of polymerization shows nearly square root dependence on β-hydroxybutyric acid at low concentration (3.12 – 12.5 · 10?3 mol dm?3). The order with respect to potassium permanganate has been found to be 0.6 indicating thereby a bimolecular mode of termination. The polymerization rate has been varied linearly at low monomer concentrations i.e. from 2.5 –7.0 · 10?2 mol dm?3. The dependence of number average degree of polymerization on the initial rate of polymerization and temperature has been determined. The over-all activation energy has been found to be 51.66 kJ mol?1. A kinetic reaction scheme is proposed on the basis of experimental results. 相似文献
A model for transitional breakage probability of droplets in agitated lean fiquid-liquid dispersions is proposed based on the mechanism of breakage of droplets due to their oscillations resulting from relative velocity fluctuations. A universal transitional breakage probability in terms of non-dimensionalized drop diameter is derived for all dispersed phases whose density and viscosity are almost the same as that of continuous phase. The maximum stable drop diameter ds derived from the model, shows a dependence of NWe?0.6. It is shown that a “power law” approximation Kvn is valid for transitional breakage probability for d/ds up to 2. The exponent 2.67, predicted by this model corresponds rather well with an estimate of 2, obtained from experimental observations. A functional relation for the rate constant K in terms of the parameters and physical properties of the system is derived. A universal non-dimensionalized equilibrium drop-size distribution for agitated lean liquid-liquid dispersions is derived by analytical solution of a population balance equation simplified by order of magnitude estimates. Interestingly enough, this analytical solution is the same as the Gaussian distribution suggested empirically by Chen and Middleman. 相似文献
This paper addresses the flow shop batching and scheduling problem where sequence-dependent family setup times are present and the objective is to minimize makespan. We consider violating the group technology assumption by dividing product families into batches. In order to reduce setup times, inconsistent batches are formed on different machines, which lead to non-permutation schedules. To the best of our knowledge, this is the first time that the splitting of job families into inconsistent batches has been considered in a flow shop system. A tabu search algorithm is developed which contains several neighbourhood functions, double tabu lists and a multilevel diversification structure. Compared to the state-of-the-art meta-heuristics for this problem, the proposed tabu search algorithm achieves further improvement when the group scheduling assumption is dropped. Also, various experiments conducted on the benchmark problem instances confirm the benefits of batching. Therefore, it will be prudent for the practitioners to consider adopting inconsistent batches and non-permutation schedules to improve their operational efficiency within a reasonable amount of computational effort. 相似文献
Crystallization of polypropylene (PP) in the blends of PP with styrene–ethylene butylene–styrene triblock copolymer (SEBS) is studied through differential thermal analysis (DTA) and X-ray diffraction measurements. Analysis of crystallization exotherm peaks in terms of crystallization nucleation and growth rates, crystallite size distribution, and crystallinity revealed differences in the morphology of PP component in the blend in the different regions of blend composition. Crystallinity determined by X-ray diffraction and DTA showed identical variations with blend composition. Variations in tensile properties of these blends with blend composition are also reported. Correlations of the various tensile properties with the crystallization parameters, viz., the crystallinity and crystallite size distribution, are presented, which confirm the influence of crystallization of PP component on the tensile properties of these blends. 相似文献
The univariant element, Q1P0, and the multivariant elements, QP0 and R P0, are compared for the numerical simulation of the flow in extrusion dies. The pressure distribution obtained by using the Q1P0 element was found to be afflicted with the checkerboard pressure mode. On the other hand, the multivariant elements, QP0 and RP0, gave accurate and physically reasonable velocity and pressure distributions. The computed values of the pressure drop across extrusion dies matched well with the pressure drop determined experimentally. 相似文献
Informally stated, we present here a randomized algorithm that given black-box access to the polynomial f computed by an unknown/hidden arithmetic formula ? reconstructs, on the average, an equivalent or smaller formula \({\hat{\phi}}\) in time polynomial in the size of its output \({\hat{\phi}}\). Specifically, we consider arithmetic formulas wherein the underlying tree is a complete binary tree, the leaf nodes are labeled by affine forms (i.e., degree one polynomials) over the input variables and where the internal nodes consist of alternating layers of addition and multiplication gates. We call these alternating normal form (ANF) formulas. If a polynomial f can be computed by an arithmetic formula μ of size s, it can also be computed by an ANF formula ?, possibly of slightly larger size sO(1). Our algorithm gets as input black-box access to the output polynomial f (i.e., for any point x in the domain, it can query the black box and obtain f(x) in one step) of a random ANF formula ? of size s (wherein the coefficients of the affine forms in the leaf nodes of ? are chosen independently and uniformly at random from a large enough subset of the underlying field). With high probability (over the choice of coefficients in the leaf nodes), the algorithm efficiently (i.e., in time sO(1)) computes an ANF formula \({\hat{\phi}}\) of size s computing f. This then is the strongest model of arithmetic computation for which a reconstruction algorithm is presently known, albeit efficient in a distributional sense rather than in the worst case. 相似文献
The intercalation of fluorine in various types of carbon fibers (PAN-based or pitch-based, asreceived or high-temperature treated) has been investigated at room temperature in the presence of gaseous HF. Stage-1 compounds with C2.5F to C4F compositions are obtained for 10 bar F2 pressures, whereas lower pressures (1 bar F2) lead to stage-2 compounds. Although in higher stages (≥2) the electrical conductivity is generally larger than in the pristine fiber, in stage-1 compounds a drastic increase of resistivity is observed, ρ being more than one order of magnitude larger than that of the starting material. Finally, fluorine-intercalated GICs have been found appropriate to investigate the effects of disorder and reduced dimensionality. 相似文献
Batch and continuous wet grinding experiments were carried out in a 40 × 40 cm grate-discharge ball bill. Well-distributed ?4 and ?20 mesh feeds of two complex pyritic ores were used. The vol. % solids in the pulp ranged from 30 to 40, the particle load from 5 to 8 kg, and the solids feed rate from 70 to 110 kg/h.Analysis of the experimental data showed that over the range of operating conditions investigated, a linearized model could be used to predict the size distributions of both the mill product as well as the mill hold-up of the solids, very accurately. The breakage rate parameters, Si, were found to be dependent on the mode of operation, independent of the percent solids in the pulp, and approximately inversely proportional to the mill hold-up weight of the solids. In the case of the continuous mode of operation, with decrease in particle size the rate parameter values became increasingly smaller by comparison with the corresponding expected batch operation values. 相似文献
Multimedia Tools and Applications - Prostate cancer (PCa) has become the second most dreadful cancer in men after lung cancer. Traditional approaches used for treatment of PCa were manual, time... 相似文献
Handwriting recognition is used for the prediction of various demographic traits such as age, gender, nationality, etc. Out of all the applications gender prediction is mainly admired topic among researchers. The relation between gender and handwriting can be seen from the physical appearance of the handwriting. This research work predicts gender from handwriting using the landmarks of differences between the two genders. We use the shape or visual appearance of the handwriting for extracting features of the handwriting such as slanteness (direction), area (no of pixels occupied by text), perimeter (length of edges), etc. Classification is carried out using the Support Vector Machine (SVM) as a classifier which transforms the nonlinear problem into linear using its kernel trick, logistic regression, KNN and at the end to enhance the classification rates we use Majority Voting. The experimental results obtained on a dataset of 282 writers with 2 samples per writer shows that the proposed method attains appealing performance on writer detection and text-independent environment.