Straightforward modeling of dynamic I–V characteristics for microwave FETs

This work presents a straightforward approach aimed at modeling the dynamic I–V characteristics of microwave active solid‐state devices. The drain‐source current generator represents the most significant source of nonlinearity in a transistor and, therefore, its correct modeling is fundamental to predict accurately the current and voltage waveforms under large‐signal operation. The proposed approach relies on using a small set of low‐frequency time‐domain waveform measurements combined with numerical optimization‐based estimation of the nonlinear model parameters. The procedure is applied to a gallium nitride HEMT and silicon FinFET. The effectiveness of the modeling procedure in terms of prediction accuracy and generalization capability is demonstrated by validation of the extracted models under operating conditions different than the ones used for the parameters estimation. Good agreement between measurements and model simulations is achieved for both technologies and in both low‐ and high‐frequency range. © 2013 Wiley Periodicals, Inc. Int J RF and Microwave CAE 24:109–116, 2014.     

HumanTop: a multi-object tracking tabletop

In this paper, a computer vision based interactive multi-touch tabletop system called HumanTop is introduced. HumanTop implements a stereo camera vision subsystem which allows not only an accurate fingertip tracking algorithm but also a precise touch-over-the-working surface detection method. Based on a pair of visible spectra cameras, a novel synchronization circuit makes the camera caption and the image projection independent from each other, providing the minimum basis for the development of computer vision analysis based on visible spectrum cameras without any interference coming from the projector. The assembly of both cameras and the synchronization circuit is not only capable of performing an ad-hoc version of a depth camera, but it also introduces the recognition and tracking of textured planar objects, even when contents are projected over them. On the other hand HumanTop supports the tracking of sheets of paper and ID-code markers. This set of features makes the HumanTop a comprehensive, intuitive and versatile augmented tabletop that provides multitouch interaction with projective augmented reality on any flat surface. As an example to exploit all the capabilities of HumanTop, an educational application has been developed using an augmented book as a launcher to different didactic contents. A pilot study in which 28 fifth graders participated is presented. Results about efficiency, usability/satisfaction and motivation are provided. These results suggest that HumanTop is an interesting platform for the development of educational contents.     

Evolutionary robustness analysis for multi-objective optimization: benchmark problems

This paper presents a new approach to robustness analysis in multi-objective optimization problems aimed at obtaining the most robust Pareto front solutions and distributing the solutions along the most robust regions of the optimal Pareto set. A new set of test problems accounting for the different types of robustness cases is presented in this study. Non-dominated solutions are classified according to their degree of robustness and are distributed along the Pareto front according to specific algorithm parameter values. Verification of the proposed method is carried out using the developed test problems and artificial and real world benchmark test problems present in the literature.     

The use of topology optimization in disposing carbon fiber reinforcement for concrete structures

A topology optimization procedure is presented as a tool for determining the distribution of external strengthening of concrete slabs, using Carbon Fiber Reinforced Polymer (CFRP). Although the procedure is applied to slabs in this work, the technique can be used in any concrete structure to be reinforced. Numerical simulations are performed using the Finite Element Method, in combination with the automated topology optimization procedure, to indicate the optimal region for placement of the reinforcement. The influence of some aspects of the slab’s structural behavior on the optimization results is presented: concrete cracking, boundary conditions and reinforcement rate. A brief discussion is given of the similarity between the topology optimization results obtained by the maximum stiffness and ultimate strength criteria. Gains are found in the stiffness and strength of reinforced parts. A comparison with conventional reinforcement techniques demonstrates that topology optimization can be a useful tool for defining the region of reinforcement, allowing for material cost savings.     

Synthesis and Characterization of Al-MCM-41 and Al-MCM-48 Mesoporous Materials

A novel route in the synthesis of Al-MCM-41 and Al-MCM-48, using tetraethoxysilane (TEOS) and sodium aluminate (NaAlO₂) as Si and Al source has been obtained. The effect of surfactant nature and the synthesis conditions such as surfactant/Si ratio and hydrothermal treatment time on the formed mesostructure regularity has been studied. Different methods of template removal have also been evaluated. The samples were characterized by X-ray diffraction, nitrogen physisorption, FT-IR, and solid-state MAS NMR spectroscopy.     

Wearable cognitive assistants in a factory setting: a critical review of a promising way of enhancing cognitive performance and well-being

Cognition, Technology & Work - Rapid technological innovations are constantly influencing the complexification and automatization of the work lines pushing human operators to use diverse...     

Understanding student participation in undergraduate course communities: A case study

Participation is the cornerstone of any community. Promoting, understanding and properly managing it allows not only keeping the community sustainable, but also providing personalized services to its members and managers. This article presents a case study in which student participation in a course community was motivated using two different extrinsic mechanisms, and mediated by a software platform. The results were compared with a baseline community of the same course, in which participation was not motivated by external means. The analysis of these results indicates that managing a partially virtual course community requires the introduction of monitoring services, community managers and extrinsic mechanisms to motivate participation. These findings allow community managers to improve their capability for promoting participation and keeping the community sustainable. The findings also raise several implications that should be considered in the design of software supporting this kind of community, when managing the participation of its members.     

Structural design using multi-objective metaheuristics. Comparative study and application to a real-world problem

Many structural design problems in the field of civil engineering are naturally multi-criteria, i.e., they have several conflicting objectives that have to be optimized simultaneously. An example is when we aim to reduce the weight of a structure while enhancing its robustness. There is no a single solution to these types of problems, but rather a set of designs representing trade-offs among the conflicting objectives. This paper focuses on the application of multi-objective metaheuristics to solve two variants of a real-world structural design problem. The goal is to compare a representative set of state-of-the-art multi-objective metaheuristic algorithms aiming to provide civil engineers with hints as to what optimization techniques to use when facing similar problems as those selected in the study presented in this paper. Accordingly, our study reveals that MOCell, a cellular genetic algorithm, provides the best overall performance, while NSGA-II, the de facto standard multi-objective metaheuristic technique, also demonstrates a competitive behavior.     

A Novel Vibrating Finger Viscometer for High-Temperature Measurements in Liquid Metals and Alloys

A novel vibrating finger viscometer for high-temperature measurement in liquid metals and alloys up to 1823 K was constructed. The dynamic viscosity (\(\eta \)) of the liquid fluid is measured as a product of \((\rho \cdot \eta )^{0.5}\) and the relative change of the field coil input for a constant amplitude recording at the resonant frequency of the oscillator. The viscometer was calibrated at 298 K using reference silicon oils with varying kinematic viscosities (\(\nu \)), \((0.79\hbox { to } 200)\times 10^{-6}\hbox { m}^{2}\cdot \hbox {s}^{-1}\). In the present study, the viscosity of liquid gold (\(99.99\,\%\) Au), silver (\(99.9\, \%\) Ag), and tin (\(99.9\,\%\) Sn) was measured. The viscosities expressed as an Arrhenius function of temperature are:

$$\begin{aligned} \hbox {for Au:}\quad \quad \hbox {ln }\eta= & {} -0.1990+\frac{2669}{T}\\ \hbox {for Ag:} \quad \quad \hbox {ln }\eta= & {} -0.4631+\frac{2089}{T}\\ \hbox {for Sn:} \quad \quad \hbox {ln }\eta= & {} -0.5472+\frac{671}{T} \end{aligned}$$

The viscosity values are consistent within the range of available literature data.