Design of signed powers-of-two coefficient perfect reconstruction QMF Bank using CORDIC algorithms

Lattice structures have several advantages over the tapped delay line form, especially for the hardware implementation of general digital filters. It is also efficient for the implementation of quadrature mirror filter (QMF), because the perfect reconstruction is preserved under the coefficient quantization. Moreover, if lattice coefficients are implemented in signed powers-of-two (SPT), the hardware complexity can also be reduced. But the discrete coefficient space with the SPT representation is sparse when the number of nonzero bits is small. This paper proposes a structure of orthogonal QMF lattice with SPT coefficients, which has much denser discrete coefficient space than the conventional structure. While the conventional approaches directly quantize the lattice coefficients into SPT form, the proposed algorithm considers the quantization in the SPT angle space. For this, each lattice stage is implemented by the cascade of several variants of COordinate Rotation DIgital Computer. The resulting angle space and corresponding discrete coefficient space is much denser than the one generated by the conventional direct quantization approach. An efficient coefficient search algorithm for this structure is also proposed. Since the proposed architecture provides denser coefficient space, it shows less coefficient quantization error than the conventional QMF lattice.     

A power re-use technique for improved efficiency of pulsed oscillating amplifiers

This letter presents a power re-use technique for pulsed oscillating amplifiers. By rectifying the upconverted switching harmonics of the pulsed oscillating output, some portions of wasted power can be returned to the power supply. The efficiency of the amplifier can be enhanced without degradation of the linearity. The measured results show that the overall efficiency of the amplifier with power re-use is improved up to 22% compared to the pulsed oscillating amplifier without the power re-use at the PCS band.     

A New QoS Resource Allocation Scheme Using GTS for WPANs

IEEE 802.15.4 (for low-rate Wireless Personal Area Networks??WPANs) (IEEE 802.15.4 Standard-2003) and IEEE 802.15.7 (for Short-Range Wireless Optical Communication Using Visible Light) (IEEE 802.15.7 Standard??2011) are two typical standards for WPANs that support Quality-of-Service (QoS) through a Guaranteed Time Slot (GTS) mechanism to allocate a specific duration within a superframe structure for a time division multiplexing transmission. The low bandwidth utilization problem may occur in the GTS mechanism when the allocated bandwidth is less than the available bandwidth. However, this problem has not been resolved thoroughly in any of the standard or current research thus far. This paper analyzes GTS performance in QoS-guaranteed transmission and proposes a new GTS allocation scheme named Unbalanced GTS Allocation Scheme (UGAS), which improves the bandwidth resource efficiency. Our scheme tries to solve the bandwidth under-utilization problem by using Network Calculus theory based on the fluid model and greedy algorithm. The UGAS scheme divides the Contention-Free Period into time slots of different durations to support various bandwidth requirements. Time slots are allocated using an approximation QoS model to minimize under-utilization. Compared with the standard GTS allocation scheme, UGAS makes an efficient bandwidth allocation with the QoS-guaranteed model and without breaking the standard protocol. The numerical results show that the average bandwidth utilization using UGAS can be improved by 30 % as compared with the standard scheme.     

Hole‐Filling Methods Using Depth and Color Information for Generating Multiview Images

This paper presents new hole‐filling methods for generating multiview images by using depth image based rendering (DIBR). Holes appear in a depth image captured from 3D sensors and in the multiview images rendered by DIBR. The holes are often found around the background regions of the images because the background is prone to occlusions by the foreground objects. Background‐oriented priority and gradient‐oriented priority are also introduced to find the order of hole‐filling after the DIBR process. In addition, to obtain a sample to fill the hole region, we propose the fusing of depth and color information to obtain a weighted sum of two patches for the depth (or rendered depth) images and a new distance measure to find the best‐matched patch for the rendered color images. The conventional method produces jagged edges and a blurry phenomenon in the final results, whereas the proposed method can minimize them, which is quite important for high fidelity in stereo imaging. The experimental results show that, by reducing these errors, the proposed methods can significantly improve the hole‐filling quality in the multiview images generated.     

Optimization of a Birefringence‐Enhanced‐Waveguide‐Based Polarization Beam Splitter

We present the optimization of a birefringence‐enhanced‐waveguide (BWG)‐based polarization beam splitter (PBS) in a Mach‐Zehnder interferometer (MZI) configuration and analyze the structure‐dependent or polarization‐dependent phase difference, using a delay‐line MZI (DL‐MZI). We fabricate the DL‐MZI using silica‐based planar lightwave circuit technology and, using the DL‐MZI, demonstrate the ability to optimize a PBS by measuring the birefringence of the BWG and structure‐dependent phase offset.     

Diversity combining with up‐link power control

We introduce in this paper a new adaptive power‐controlled diversity combining scheme that reduces the average transmitted power of the mobile units (MUs) while meeting a certain minimum required quality of service. The key idea is (i) to collect and combine all the available diversity paths at the base station (BS) and then (ii) to request the MU to increase or decrease its transmitted power just to track the required target signal‐to‐noise ratio (SNR). Four power control variants accounting for practical implementation constraints including discrete power levels and transmitter gain saturation are proposed and studied. Some selected numerical results show that the proposed scheme offers considerable savings in the transmitted power levels over a wide SNR range but amplifier saturation leads to a violation of the target BER requirement in the low average SNR range. Additional numerical examples show that the power control variants that take into account practical implementation constraints conserve the main features of the ideal continuous power algorithm. Copyright © 2007 John Wiley & Sons, Ltd.     

A dynamic decoupling control scheme for high-speed operation ofinduction motors

In a high-speed operation of a vector-controlled induction motor, coupling between d-q current dynamics impairs the characteristics of torque response. The feedforward decoupling scheme does not perform well if an error exists in the motor parameter estimation. We derive a dynamic decoupling condition when the two additional proportional integral current controllers are used. A great advantage of this dynamic decoupling controller is the robustness to the motor parameter estimation errors. Further, we observe that overmodulation methods lead to the violation of the decoupling condition, thereby yielding a poor performance in the high-speed high-power operation. As a method of resolving this problem, we propose a decoupling preserving overmodulation algorithm which also enhances the torque transient response. Through simulation and experimental results, we demonstrate the improved performance of the proposed controller     

A comparison of gamma radiation effects on bromine- and hydrazine-treated HgCdTe photodiodes

In this study, we investigated the effects of gamma radiation on ZnS/CdTe-passivated HgCdTe photodiodes that were fabricated with one of two different surface treatments using bromine, Br₂, or hydrazine, N₂H₄. Unlike the ZnS-passivated HgCdTe photodiodes, the ZnS/CdTe-passivated HgCdTe photodiodes showed no degradation in resistance-area product at zero bias (R₀A) values after gamma irradiation of up to 1 Mrad. However, there is a significant difference between the bromine- and hydrazine-treated samples. Regardless of the dose of gamma radiation, there was little change in the forward current characteristics of the hydrazine-treated diode in comparison with the conventional bromine-treated diode. The hydrazine-treated diode showed fairly uniform R₀A values of >10⁷ Ω-cm² up to 1 Mrad of gamma irradiation, whereas the bromine-treated diode showed an abrupt change in R₀A values from ∼10⁶ Ω-cm² to ∼10⁷ Ω-cm² after gamma irradiation. Therefore, for use in a gamma radiation environment, the best combination for high-performance HgCdTe photodiodes is a ZnS/CdTe passivant that has been treated with hydrazine.     

Network modelling of periodic patch loaded slotline

A network model of a patch loaded slotline (PLS) is proposed for the efficient design of related microwave circuits. The unit model is established by combining the network model for a slotline-to-microstrip transition with the equivalent circuits for microstrip step-discontinuities and open-ends. Therefore, this model is useful for the analysis of periodic PLS structures only by cascading it with a uniform slotline. To validate it, the computed results are compared with the EM simulated and measured ones, and they are shown to give good agreement in a wide frequency range.     

The Doherty Power Amplifier With On-Chip Dynamic Bias Control Circuit for Handset Application

A monolithic-microwave integrated-circuit Doherty power amplifier (PA) with an on-chip dynamic bias control circuit for cellular handset application has been designed and implemented. To improve the linearity and efficiency in the operation power ranges, the base and collector biases of the amplifiers, except the drive amplifier of the main path, are controlled according to the average output power. The base biases are controlled using the on-chip circuit and collector biases by the dc/dc chip to reduce the average dc consumption power. The power-added efficiency (PAE) is improved approximately 6% by the base dynamic bias control, and approximately 14% by the collector/base dynamic control from the class AB at Pout=16 dBm, respectively. If the dc/dc converter efficiency is 100%, the PAE could be improved approximately 17.5% from class AB, reaching to 29.2% at Pout=16 dBm. In the intermediate power level from 22 to 28 dBm, the PAE is over 34.3%. The average current consumption of the PA with the dynamic bias control is 22.5 mA in urban and 37.3 mA in suburban code-division multiple-access environments, which are reduced by 36%-46.7%, compared to the normal operation. The adjacent channel power ratio is below 47.5 dBc, and the PAE at the maximum power is approximately 43.3% in the dynamic bias operations