INVESTIGATION OF THE USE OF LASER-DOPPLER VELOCIMETRY IN TWO-PHASE BUBBLY FLOWS

Understanding the dynamic phenomena of viability loss of shear sensitive cells and bubble breakage and coalescence within airlift reactors requires knowledge of local, liquid-phase hydrodynamics. The laser-Doppler velocimeter (LDV) is a non-invasive instrument which may be used to obtain this information. Experimental procedures and software were developed to detect and measure Doppler bursts in two-phase flow in a split-cylinder airlift reactor. Off-line analysis of the data indicated a detection rate approximately one order of magnitude greater than that observed using an available commercial frequency tracker. Approximately 400 to 500 observations are needed for the ensemble mean to characterize the local mean velocity to within ±5% for a superficial gas velocity of 10.4 cm/s, the highest superficial gas velocity used in these studies. The limitations, prospects, and signal-processing options for LDV in this application are also discussed     

Barium aluminate hydrates. IV. α-BaO.Al2O3.4H2O

α-BaO.Al₂O₃.4H₂O has been synthesised and studied by infrared, X-ray and thermal analytical techniques. The compound of approximate formula BaO.Al₂O₃.0.5H₂O, described in Part III, forms as a dehydration product, and appears to be identical with the compound β-BAH₂ described by other workers. A possible explanation for the discrepancy in water content is discussed.     

Zinc Coated Steel/Epoxy Adhesive Systems: Investigation of the Interfacial Zone by FTIR Spectroscopy

The present study takes advantage of the ability of Fourier Transform Infrared Spectroscopy (FTIR) for the analysis of ultrathin organic films on metals. FTIR in the reflection mode (IRRAS) is used in order to study the interaction of ultrathin films of dicyandiamide (hardener of most one-pack epoxy resins) with various substrates, model ones such as gold or zinc and industrial ones such as steel and zinc-coated steels.

Pure zinc surfaces and, to a lesser extent, zinc-coated steels are shown to react with dicyandiamide after heating at 180°C, as evidenced by the frequency shift of the absorption band (at about 2200 cm^-1) characteristic for nitrile groups. As real systems consist of thick layers of a fully formulated adhesive cured onto a metallic substrate, the direct investigation of such a buried interphase is no longer possible by FTIR and by most of the known spectroscopies. Some mechanically tested specimens are then analysed, after failure, by FTIR microspectrometry. The spectra obtained, corresponding to the fracture initiation zone which is about 100 μm in diameter, advocate for the presence of an ultrathin layer of modified polymer still covering the substrate.     

Skin and layer formation in films prepared from carbohydrates,poly(ethylene-co-acrylic acid), and polyethylene

Cornstarch, a canary dextrin, and a maltodextrin were compared in films blown from carbohydrates compounded with poly(ethylene-co-acrylic acid) (EAA), low-density polyethylene (LDPE), and aqueous ammonium hydroxide plasticizer. Dextrins or maltodextrins having dextrose equivalent values of one and greater caused dark-colored films with caramel odors, probably due to Maillard reactions. Blown films with hydrophobic skins and water sensitive cores were produced with the dextrinized carbohydrates, but not from natural cornstarch. Water sensitivity of films containing the dextrinized carbohydrate was reduced by recycling the films through the blown film die. A mechanism for development of the skins is proposed, as is a method for preparing thin semipermeable membranes. © 1993 John Wiley & Sons, Inc.

1 This article is a US Government work and, as such, is in the public domain in the United States of America.

     

ON THE DYNAMICS OF THE COMBUSTION OF SINGLE CHAR PARTICLES

Diffusion and reaction models of varying complexity are used to study the stability of the combustion of single char particles. In contrast to past studies which have considered only the reaction of carbon with oxygen, both the heterogeneous reactions of carbon with oxygen and carbon dioxide and the homogeneous oxidation of carbon monoxide are taken into account in the formulation of the mathematical models. Emphasis is placed on the investigation of the feasibility of occurrence of oscillatory combustion. Our results show that high rates of the C-O₂ reaction and high concentration of O₂ in the ambient favor the occurrence of multiple steady states and oscillatory solutions, but the appearance of oscillatory instability is suppressed by the homogeneous reaction in the gas phase and the presence of CO and CO₂ in the ambient. The parametric investigation of the problem reveals, in agreement with the results of past studies, that the heat capacity of the porous solid, the Lewis number, and the thickness of the stagnant film are three key parameters for the occurrence of the oscillatory response of the system. Reasonably large values of solid heat capacity practically eliminate the possibility of oscillatory combustion, but an appropriate combination of large values of stagnant film thickness and small Lewis numbers may offset the effect of solid heat capacity     

Preadhesion Laser Treatment of Aluminum Surfaces

An excimer laser may be used for preadhesion treatment of aluminum alloys. This method presents an alternative to the use of ecologically unfriendly chemicals involved in conventional anodizing pretreatments.

Experimental results indicate that preadhesion laser surface treatment significantly improved the shear strength of modified-epoxy bonded aluminum specimens compared with untreated and anodized substrates. The best results were obtained with laser energy of about 0.2 J/Pulse/cm² where single lap shear strength was improved by 600-700% compared with that of untreated Al alloy, and by 40% compared with chromic acid anodizing pretreatment.

The mode of failure changed from adhesive to cohesive as the number of laser pulses increased during treatment. The latter phenomenon has been correlated with morphology changes as revealed by electron microscopy, and chemical modification as indicated by Auger and infrared spectroscopy.

It can be concluded that the excimer laser has potential as a precise, clean and simple preadhesion treatment of Al alloys.     

The hydration of jet cement at 20°C

Two types of jet cement having different retarders were investigated. Both physical properties such as mechanical strength, pore size distribution and porosity and chemical processes of hydration such as rate of hydration and the kind of hydrate produced upon hardening of jet cement are strongly affected by the method of the regulation of setting. The difference between the mechanical strength developed is discussed.     

Comparison of selective cytotoxicity of alkyl lysophospholipids

Alkyl lysophospholipids have been shown to be cytooxic to a number of neoplastic tissues. One, ET-18-OCH₃, has been used to selectively purge leukemic cells from mixtures with normal marrow progenitor cells,in vitro andin vivo. We have measured the 50% inhibitory (IC₅₀) effect of a series of ether, lipids (EL) on leukemic cells (HL60, K562, Daudi, KG-1, KG-1a) and normal marrow progenitor cells. Cells were incubated with varying concentrations of EL for 4 hr and assayed for viability, [³H]thymidine incorporation and clonogenicity in semi-solid media. The effect on protein kinase C (PKC) activity was assayed for each compound. Compounds tested included three glycerophosphocholine analogs-ET-18-OCH₃, ET-16-NHCOCH₃, and BM 41.440. In addition, a lipoidal amine, CP 46665, an ethyleneglycolphospholipid, AEPL, and four single chain alkylphosphocholine analogs, HePC₂, HePC₃, HePC₄ and HePC₆ were also tested. During the period of incubation, the cells remained viable (>70%) as judged by trypan blue dye exclusion. The glycerophosphocholines were the most active and showed the highest therapeutic index. The lipoidal amine was active, but toxic to normal marrow progenitor cells. The ethyleneglycolphospholipid was active against HL60, but not against the other cell lines. The single chain alkylphosphocholine analogs were less active. All of the compounds inhibited PKC activity; however, the glycerophosphocholines were the most inhibitory. Based on a paper presented at the Third International Conference on Platelet-Activating Factor and Structurally Related Alkyl Ether Lipids, Tokyo, Japan, May 1989.     

Effect of additives on formation of natural gas hydrate

The formation of natural gas hydrate (NGH) is studied in this work. Kinetics data of hydrate formation with no agitation were collected at various concentrations of the aqueous solutions with different additives such as alkylpolyglucside, sodium dodecyl benzene sulfonate and potassium oxalate monohydrate. Various kinds of additive increased the formation rates of NGH and its storage capacity and reduced the induction time of NGH formation. Moreover, the storage capacity, the induction time and the hydrate formation rate were influenced by the concentration of the aqueous solution.