Development of Mechanical Anchor for CFRP Tendons Using Integrated Sleeve

A durable and very efficient external strengthening system is achieved if steel tendons for posttensioning applications can be replaced with carbon fiber-reinforced polymer (CFRP) tendons, and if reliable anchorage systems are developed. This paper presents a newly developed and simple-to-use, two-piece wedge anchorage for CFRP tendons with an integrated sleeve and a differential angle between barrel and wedge sections. Three longitudinal slits are cut into the one-piece wedge, with one slit open and the other two stopping 1 mm from the inner wedge hole. The integrated sleeve holds the wedge’s sections together during presetting and loading, resulting in a circumferential confined gripping of the CFRP tendon and optimized surface friction area. Therefore, the one-piece wedge differs from conventional wedge systems, where the wedges act separately with adjacent spaces, wedging the separate tendon sleeve in the longitudinal direction. Evaluation of the failure modes during testing was one of the main keys in achieving an increasingly better performance of the anchorage until the final anchorage was developed. The obtained failure modes are therefore described to enlighten the importance of addressing them when testing. The test setup used and measured behavior are described further together with the loading procedure. The anchorage reached the full capacity of the CFRP tendon and was seen to ensure a stable load of fracture.     

Armstrong axioms and Boyce-Codd-Heath Normal Form under bag semantics

The theory of functional dependencies is based on relations, i.e. sets of tuples. Over relations, the class of functional dependencies subsumes the class of keys. Commercial database systems permit the storage of bags of tuples where duplicate tuples can occur. Over bags, keys and functional dependencies interact differently from how they interact over relations.We establish finite ground axiomatizations of keys and functional dependencies over bags, and show a strong correspondence to goal and definite clauses in classical propositional logic. We define a syntactic Boyce-Codd-Heath Normal Form condition, and show that the condition characterizes schemata that will never have any redundant data value occurrences in their instances. The results close the gap between the existing set-based theory of data dependencies and database practice where bags are permitted.     

德国并不是加热欧洲太阳能市场的唯一国家

据iSuppli公司,虽然德国作为新增太阳能安装之王获得了光伏(PV)市场的王冠,但欧洲其它国家也在扩大自己的2010年及未来光伏计划.实际上,欧洲其它可以替代德国成为投资热点的地区大量涌现,意大利和法国的投资回报(ROI)就非常吸引人.iSuppli公司已经看到,大多数德国太阳能投资者涌向这些国家,以拓宽投资范围.     

Predicting the site specific soil N supply under winter wheat in Germany

The expected amount of plant nitrogen (N) at harvest which originates from soil N supply is of high relevance for N fertilization planning. Due to mineralization–immobilisation turnover processes, soil N supply is influenced by N fertilization which complicates its assessment. The soil N supply consists of two components: the soil mineral N measured at early spring and the ‘effective’ N mineralization (Min^eff) under winter wheat (Triticum aestivum L.). Min^eff was defined as the difference between crop N uptake (N^crop) at harvest and N supply. Our aim was the identification and quantification of climate and site-related factors in order to achieve an improved assessment of the site-specific (long term average) Min^eff. We used N rate experiments from 411 collective seasons, carried out at 98 sites across Germany in order to analyze the impact of climate and site-related factors on Min^eff. Quadratic curves were fitted in order to describe the grain N uptake as a function of N supply. A fixed marginal N efficiency was defined in order to analyze Min^eff at a reasonable N supply. Starting with estimates for Min^eff as function of preceding crop, we found that climate (average temperature during May, annual rainfall) and site-related factors have a significant influence on Min^eff. In order to ensure that the regression model is transferable to unknown sites, a “leave one site out” cross validation was carried out. Compared to considering preceding crop only (reference), the regression model reduced the RMSE by 9.5 (calibration) or 8.3 (cross validation) kg N/ha.     

Isolation of Lysozyme from Hen Egg Albumen by Alcohol-Insoluble Cross-Linked Pea Pod Solid Ion-Exchange Chromatography

ABSTRACT: Albumen from hen eggs was diluted 3-fold with 0.05 M NaCl solution at pH 4.0 and was further treated with 30% ethanol for 8 h. The supernatant (77900 U/mg protein) thus obtained was further diluted (2.5-fold) with distilled water and its pH value was adjusted to 8.0 before being subjected to alcohol-insoluble cross-linked pea pod solid (AICLPPS) ion-exchange chromatography for lysozyme isolation. Results showed that AI-CLPPS ion-exchange chromatography increased the purification to 68-fold with a 72% lysozyme recovery from the starting albumen.     

Surface Chemical Characterization of Ceramic Materials: Adsorption and Degradation of 3,6,9-Trioxadecanoic Acid on Nano-ZrO2

This paper deals with the specific interaction of the dispersant 3,6,9-trioxadecanoic acid (TODA) with nano-ZrO₂ surfaces. Special interest was directed towards degradation behavior of the adsorbates and its influence on dispersant capabilities of TODA regarding stabilization of ethanolic nano-ZrO₂ suspensions. ZrO₂ adsorption sites and the adsorbates formed are examined by diffuse reflectance infrared Fourier transform spectroscopy, thermal analysis, ¹H-, and ¹³C-cross polarization magic angle spinning solid-state nuclear magnetic resonance spectroscopy. ¹H as well as ¹³C-chemical shifts and the configurations of the corresponding adsorbed TODA species on zirconia sites are predicted by means of density functional theory quantum chemical calculations for supporting the interpretation of the experimental spectral data obtained. This work shows that combination of analytical and theoretical methods is an effective approach characterizing surface chemical properties of ceramic materials, determining sorption properties of organic process additives, investigating correspondent elementary and degradation reactions as well as clarifying cause-effect relationships in ceramic processes.     

Planar-junction, top-illuminated GaInAs/InP pin photodiode with bandwidth of 25 GHz

A top-illuminated GaInAs/InP pin photodiode has been produced in a planar-junction configuration, which combines high reliability (no change in dark current over 4700 h at 175 degrees C) with the widest bandwidth (25 GHz), and highest quantum efficiency (80% at 1.55 mu m), yet reported for this type of device.<>     

In situ observations on the austenite stability in TRIP‐steel during tensile testing

In‐situ deformation tests have been performed on a steel displaying the transformation‐induced plasticity (TRIP) effect, while monitoring the phase transformation by means of X‐ray diffraction. A tensile stress is applied to 0.4 mm thick samples of this steel with mass contents of 0.26 % Si, 1.5 % Mn, and 1.8 % Al in a transmission geometry for a synchrotron‐radiation beam of 25 μm · 25 μm. On the diffraction patterns every grain appears as a discrete spot. The austenite {200} reflections are analysed during this investigation. The diffraction patterns are treated like a powder pattern for five different η‐angles, with η representing the angle between the tensile direction and the normal direction of the diffracting {200} planes. The results of the analysis show that η = 0° and η = 90° are the preferential orientations for the transformation to martensite. The Ludwigson and Burger model [9] is used to gain more information about the stress dependence of the deformation induced martensite formation. The microdiffraction patterns also reveal the changes in carbon concentration in austenite at each retained austenite fraction.     

Beyond Good Partition Shapes: An Analysis of Diffusive Graph Partitioning

In this paper we study the prevalent problem of graph partitioning by analyzing the diffusion-based partitioning heuristic Bubble-FOS/C, a key component of a practical successful graph partitioner?(Meyerhenke et al. in J. Parallel Distrib. Comput. 69(9):750?C761, 2009). We begin by studying the disturbed diffusion scheme FOS/C, which computes the similarity measure used in Bubble-FOS/C and is therefore the most crucial component. By relating FOS/C to random walks, we obtain precise characterizations of the behavior of FOS/C on tori and hypercubes. Besides leading to new knowledge on FOS/C (and therefore also on Bubble-FOS/C), these characterizations have been recently used for the analysis of load balancing algorithms?(Berenbrink et al. in Proceedings of the 22nd Annual Symposium on Discrete Algorithms, pp. 429?C439, 2011). We then regard Bubble-FOS/C, which has been shown in previous experiments to produce solutions with good partition shapes and other favorable properties. In this paper we prove that it computes a relaxed solution to an edge cut minimizing binary quadratic program (BQP). This result provides the first substantial theoretical insight why Bubble-FOS/C yields good experimental results in terms of graph partitioning metrics. Moreover, we show that in bisections computed by Bubble-FOS/C, at least one of the two parts is connected. Using the aforementioned relation between FOS/C and random walks, we prove that in vertex-transitive graphs both parts must be connected components.     

Enhancement of bonding strength by graded structure at interface between apatite layer and bioactive tantalum metal

Tantalum metal is a candidate for use as an implant material in high load-bearing bony defects, due to its attractive features such as high fracture toughness and high workability. This metal, however, does not have bone-bonding ability, i.e. bioactivity, and therefore the development of bioactive tantalum metal is highly desirable. It is known that the essential prerequisite for an artificial material to show bioactivity is to form a bonelike apatite layer on its surface in the body environment. The same type of apatite layer is formed in a simulated body fluid (SBF) with inorganic ion concentrations nearly equal to those of human blood plasma. The present authors previously showed that the apatite formation on tantalum metal in SBF was remarkably accelerated by treatment with 0.5 M-NaOH aqueous solution and subsequent firing at 300 °C, while untreated tantalum metal spontaneously formed the same apatite after a long soaking period. In the present study, the bonding strength of the apatite layer to the substrate was quantitatively evaluated in comparison with that to the untreated tantalum metal. Adhesive strength was measured as an estimation of bonding strength, and the surface microstructure of both the substrates was characterized in order to discuss the difference in the bonding strength in terms of surface structure. The apatite layer formed on the NaOH- and heat-treated tantalum metal shows higher adhesive strength than that formed on the untreated metal. The amorphous sodium tantalate layer formed on the tantalum metal by NaOH and heat treatments, has a smooth graded structure where its concentration gradually changes from the surface into the interior metal. Smooth graded structure with complex of apatite is constructed after soaking in SBF. The higher bonding strength of the apatite layer formed on the treated metal is attributed to its smooth graded structure.