Effect of sodium carbonate on the oxidation of sublimates during niobium electron-beam remelting

The effect of sodium carbonate additions on phase formation during the air oxidation of the sublimates of niobium electron-beam remelting is studied by derivatography, X-ray diffraction analysis, and electron-probe microanalysis. The composition of the oxidation products changes with the heating temperature. The formation of sodium niobates and aluminates is detected by X-ray diffraction analysis at temperatures higher than 600°C. The oxidation of the sublimates is completed by the formation of sodium metaniobate and aluminate. Sodium carbonate additions are shown to accelerate the oxidation of the sublimates.     

Modified determination of 2-thiobarbituric acid value in fats and oils

Several methods for the determination of TBA-value were compared with a new direct modification (omitting the previous distillation), using 1-butanol as the sole solvent. The absorbance is measured at 530 nm after heating to 95 degrees C for 120 min, and cooling. The effect of variables was tested by the Youdens ruggedness test (reaction time, temperature, cooling, concentration of sample, thiobarbituric acid, water, heavy metals, antioxidants, chelating agents, bubbling with oxygen or nitrogen). The Lambert-Beers law is valid in the absorbance range between 0.05 and 0.8. The repeatability is better than that of the Dzikowskis procedure and comparable with those of more complicated distillation methods. The standard deviation is in a linear relation with the absorbance (range 0.1-1.0). The method was found satisfactory for evaluating lard, cooking fat, soybean, sunflower, and rapeseed oils in the stage of beginning rancidity.     

Considerations on ex-vessel corium behavior: Scenarios, MCCI and coolability

The aim of this editorial article is to provide some structuring of the subject addressed in this part of the issue, which, in the view of the present authors, has not that clearly been reached by the specific contributions. Ex-vessel corium behavior is a wide field. Therefore, classification of the goals of investigations within a safety philosophy is especially required to get not lost in detailed aspects. The overall goals here are the coolability and retention options under ex-vessel conditions. Based on scenario considerations generally addressing risks and options, general principles of cooling and retention devices are outlined. Since the concrete erosion by melt yields a major risk and has to be considered in the concepts and devices, and also since several contributions to this part are dealing with specific aspects of this molten core-concrete interaction (MCCI), a large part of this editorial paper concerns the status of knowledge and modeling and the lines of research in this area. The status and the perspectives of codes is especially addressed by own contributions of one of the authors with the GRS code WEX and with MEDICIS, both codes included in the European integral code ASTEC. Finally, the coolability questions are discussed with respect to the different concepts in general and those addressed specifically in the present contributions. In some considerations, gas production by erosion plays a role to produce porous or particulate debris and thus to enhance coolability. Water injection from bottom is a more direct and probably more effective measure to reach this, specifically designed in the COMET core catcher concept. Specific contributions in this part deal with this concept, which is most closely related to the general subject of the present issue.     

Internal-corrosion inhibitors for pipelines carrying deaerated heating water

The effect of internal-corrosion inhibitors on heating-system pipelines is investigated. Tests were conducted on a testing device for polarization measurements under conditions corresponding to the Rostov Heat-Supply System. The concentration of OEDP-zinc, which provides a high degree of protection from general corrosion, is determined. The reagent has been successfully incorporated into the Rostov No. 2 TPP. __________ Translated from élektricheskie Stantsii, No. 7, July 2007, pp. 37–43.     

High-rate sulphidogenic fluidised-bed treatment of metal-containing wastewater at high temperature.

The applicability of fluidised-bed reactor (FBR) based sulphate reducing bioprocess was investigated for the treatment of iron containing (40-90 mg/L) acidic wastewater at 65 degrees C. The FBR was inoculated with sulphate-reducing bacteria (SRB) originally enriched from a hot mining environment. Ethanol or acetate was supplemented as carbon and electron source for the SRB. A rapid startup with 99.9, 46 and 29% ethanol, sulphate and acetate removals, in respective order, was observed even after 6 days. Iron was almost completely removed with a rate of 90 mg/L.d. The feed pH was decreased gradually from its initial value of 6 to around 3.7 during 100 days of operation. The wastewater pH of 4.3-4.4 was neutralised by the alkalinity produced in acetate oxidation and the average effluent pH was 7.8 +/- 0.8. Although ethanol removal was complete, acetate accumulated. Later the FBR was fed with acetate only. Although acetate was present in the reactor for 295 days, its oxidation rates did not improve, which may be due to low growth rate and poor attachment ability of acetate oxidising SRB. Hence, the oxidation of acetate is the rate limiting step in the sulphidogenic ethanol oxidation by the thermophilic SRB.