蒸发器泄漏原因分析及处理

对锦州石化分公司第三套催化裂化装置系统蒸发器泄漏原因进行了分析,并提出处理措施。收到较好的效果。     

永8复杂断块油藏水平井地质优化设计

永8块为复杂断块油藏，若全部采用直井开发，不但井网密度大、开采时间长，而且直井防砂后产量低，开发效益不明显。水平井开发的可行性论证认为，出砂的复杂断块油藏适合用水平井开发；水平段应与大断层保持一定的距离且位于正韵律油层的中上部。采用直井和水平井相组合的布井方式，可充分发挥直井钻遇油层层数多和水平井与油层接触面积大、产量高的优势，从而提高复杂断块油藏的开发效果。     

FLOCCULATION OF ASPHALTENES AT HIGH PRESSURE. II. CALCULATION OF THE ONSET OF FLOCCULATION

The influence of pressure on the onset of flocculation of asphaltenes was calculated in the region from 1 to 300 bar and from 50 to 100°C. These calculations are the counterpart to our experimental data which, recently, have been reported in part 1 of an equally titled article [9]. As gas component methane and as precipitant i-octane were used. The asphaltene flocculation was considered to be a liquid-liquid equilibrium. For modelling the van der Waals equation of state (vdW-EOS) in the framework of continuous thermodynamics was applied. The composition of the crude oil was described by a continuous distribution function with respect to the solubility parameter δ of the Scatchard-Hildebrand theory. Within the distribution the asphaltenes represent the species with the highest δ-values. For oils with a very low content of asphaltenes the model developed describes the experimental flocculation data reasonably. In accordance to the experimental data the model predicts that, in the considered pressure range, without addition of i-octane asphaltene flocculation does not occur. However, on contrary to the experimental results, the model predicts the asphaltenes to show a higher flocculation tendency with increasing asphaltene content of the crude oil. For very high asphaltene contents the model even completely fails. Probably, the reason of this lack is the disregarding of asphaltene association.     

某双曲拱坝的体型调整

在某砌石双曲拱坝施工中,由于施工放样的错误,使已建拱坝坝轴线偏离了设计坝轴线,为此需要重新调整拱坝体型。根据已建成的拱冠梁上游面曲线重新确定新的曲线方程,待建部分用新的曲线方程延伸,经空间有限元的应力变形分析,认为调整后的拱坝体型可行。现已付予实施。     

城市规划与城市资源共享--以中山市小榄镇通信网络建设为例

发展经济、保障供给、安置就业人口与合理使用有限的城市资源,是我国加入WTO后城市面临的问题。党的十五大明确提出了我国经济体制改革的总体目标,要在2010年前后基本形成比较完善的社会主义市场经济体制框架。随着我国经济的市场化改革进一步推进,市场在资源配置中将越来越充分地发挥主导性作用。加入WTO后我国对外     

Intermetallic compounds formed at the interface between liquid indium and copper substrates

The interfacial reactions between liquid In and Cu substrates at temperatures ranging from 175°C to 400°C are investigated for the applications in bonding recycled sputtering targets to their backing plates. Experimental results show that a scallop-shaped Cu₁₆In₉ intermetallic compound is found at the Cu/In interface after solder reactions at temperatures above 300°C. A double-layer structure of intermetallic compounds containing scallop-shaped Cu₁₁In₉ and continuous CuIn is observed after the Cu/In interfacial reaction at temperatures below 300°C. The growth of all these intermetallic compounds follows the parabolic law, which implies that the growth is diffusion-controlled. The activation energies for the growth of Cu₁₆In₉, Cu₁₁In₉, and CuIn intermetallic compounds calculated from the Arrhenius plot of growth reaction constants are 59.5, 16.9, and 23.5 kJ/mole, respectively.     

液压集成块校核软件的编制和应用

本文叙述了液压集成块校核软件的编制思想和方法，并重点介绍了编制过程中所使用的相关技术，同时给出部分源程序。     

Nondestructive evaluation of the characteristics of degraded materials using backward radiated ultrasound

The frequency dependency of Rayleigh surface wave is investigated indirectly by measuring the angular dependency of the backward radiation of the incident ultrasonic wave in two kinds of degraded specimens by scuffing or corrosion. Then, the frequency dependency is compared with the residual stress distribution or the corrosion-fatigue characteristics for the scuffed or corroded specimens, respectively. The width of the backward radiation profile increases with the increase of the variation in residual stress distribution for the scuffed specimens. In the corroded specimens, the profile width decreases with the increase of the effective aging layer thickness and is inversely proportional to the exponent, m, in the Paris’ law that can predict the crack size increase due to fatigue. The result observed in this study demonstrates high potential of backward radiated ultrasound as a tool for nondestructive evaluation of subsurface gradient of material degradation generated by scuffing or corrosion.     

Interface stability during displacement reactions between Cu<Subscript>2</Subscript>O and Co<Subscript>1−<Emphasis Type="Italic">X</Emphasis></Subscript>Fe<Subscript><Emphasis Type="Italic">X</Emphasis></Subscript> alloys at 1223 K

The stability of the reactive interface during the solid-state displacement reaction, Cu₂O+Co_1−X Fe _X =2Cu+(Co_1−X Fe _X )O, is studied as a function of Co-Fe alloy composition at 1223 K. For X≤0.03, the reaction zone has a layered structure, and the cation diffusion in (Co, Fe)O is the rate-limiting step. The interface is unstable in the early stages of the reaction; the instability decreases with time as the oxide thickness increases, and the interface becomes planar at long times. The time required for the attainment of interface planarity increases with the value of X. The reaction kinetics are consistent with the available cation-diffusion data in (Co, Fe)O. For X≥0.045, the product zone is a composite of Cu+(Co, Fe)O, and the rate is limited by the oxygen transport in copper. The transition to interface instability occurs when the oxide can support a cation flux that exceeds the maximum possible oxygen flux in copper. During the reaction, composition gradients develop in (Co, Fe)O because of higher diffusion rates for iron than for cobalt.