Reproducibility of indoor environment characteristics obtained in a walk through questionnaire. A pilot study

Walk through questionnaires may be feasible tools to obtain data on the indoor environment in community studies. However, limited information is available regarding the reproducibility of the data obtained through these questionnaires. In this pilot study, two construction engineering students inspected ten dwellings twice by means of a standardized walk through questionnaire. The two engineering students inspected the dwellings independent of each other within two months. Time between the two visits varied between 14 and 40 days. The variables presented were based on information from the residents and inspection. The continuous variables recorded included number of rooms in the dwellings, room volume, length of filled shelves and textile area. The inter- and intra-observed variabilities were poorer for number of rooms and shelf factor than for the other variables. For the 3 of the 9 categorical variables based on inspection, the inter-observer comparison showed complete agreement with a kappa statistics of 1.0, these variables being condition of the window frames and construction of outside walls and roof. One of the categorical variables showed a kappa statistics of < 0.5, these variables being presence of basement and presence of condensation at windows. This study indicates a wide variation in observer variability between various items of a walk through questionnaire. Clear definitions of all the parts of the questionnaire are needed, as well as thorough training of observers.     

Selective removal of gallium (III) from aqueous solutions containing zinc or aluminum using sodium di-(n-octyl) phosphinate

Gallium was removed selectively from aqueous solutions containing zinc or aluminum using sodium di-(n-octyl) phosphinate as a ligand (NaL). At low pH or low mole ratios, the gallium was removed by complexation with the ligand as GaL(3(S)), while the zinc or the aluminum remained in the solution. Nearly complete separation of gallium was obtained. By increasing the amount of ligand or by increasing the pH, the zinc or aluminum remaining in the solution was then removed as a solid complex: ZnL(2(S)) or AlL(3(S)), respectively. At a pH between 1.5 and 2 and a mole ratio ligand to total metals of 0.75 for zinc solutions and 1.0 for aluminum solutions, more than 98% of the gallium was selectively removed with a high molar selectivity, alpha(Ga/Zn) and alpha(Ga/Al), respectively. Over 95% of gallium was recovered from the solid GaL(3(S)) complex by treatment of the complex with a 3M NaOH solution and diethyl ether. The gallium was concentrated in the aqueous solution to 4 times its initial concentration and the ligand was extracted into the ether phase. After evaporation of the ether, 95% of the ligand was regenerated in its sodium form as a solid.     

Role of phosphorus in eutrophication and diffuse source control

Many lakes and some streams and estuaries are showing signs of excessive fertilization due to the input of aquatic plant nutrients from man-associated sources. The key element often found limiting aquatic plant populations is phosphorus. The attempt to control phosphorus input to natural waters as the overall approach for controlling excessive fertilization is technically sound and economically feasible for many natural waters. However, a much better understanding of the relationship between the phosphorus input to a lake and the excessive growths of aquatic plants within the lake must be developed. This development will require a combined biological and chemical approach toward assessing the role of phosphorus in eutrophication for a specific water body. The biological approach will use tissue content, enzymatic and kinetic uptake analysis of phosphorus limitations as well as bioassays of phosphorus availability in order to determine the limiting nutrient for a body of water. The chemical aaproach will utilize amounts of each of the forms of phosphorus present in the lake and the rates of interchange of phosphorus between these various forms.There will be some waters where control of phosphorus from treatment of domestic waste water input and removal of phosphorus from detergents will not result in significant improvement in water quality. This is because these waters derive their phosphorus from diffuse sources, such as urban and rural stormwater drainage, the atmosphere, and ground waters. In these instances, it may be necessary to initiate in-lake control of phosphorus by the addition of alum or iron salts.     

Synthesis of ettringite: a way to deal with the acid wastewaters of aluminium anodising industry

Synthesis of ettringite from acid wastewaters of the aluminium anodising industry has been studied as a possible route of reducing the emissions to the environment, recovering at the same time resource materials as a useful marketable mineral. Wastewaters of different concentrations have been subjected to the process of synthesis suspending calcium oxide and calcium aluminate powders at different time and pH conditions. High caustic alkalinity (pH approximately 12) and low sulphate concentrations (<0.1 M) are the most suitable conditions to synthesise ettringite. The mineral characterisation has been performed using X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA) and differential thermal analysis (DTA), proving the high purity of the pursued solid product when hydrated in the appropriate sodium hydroxide concentrations. In such conditions, around 90% of the aluminium initially present in the wastewater solutions is recovered in the form of ettringite.     

Observations on the changes in nitrate concentrations along streams in seven upland moorland catchments in Northeast Scotland

River water has been sampled under baseflow conditions in both summer and winter at c. 250-m intervals along the length of each of seven rivers in northeast Scotland, and the nitrate contents have been determined. The resultant data have been examined in the context of the nitrogen saturation hypothesis. Capacity of the catchment soils to retain nitrate was generally minimal in winter. Although biological uptake of nitrate was evident in summer, in the upper part of each catchment substantial nitrate leaching still occurred. The phenomenon was most marked in water draining from hill peats, except where these were conspicuously waterlogged. The results are discussed in the context of possible nitrogen saturation effects on upper catchment slopes.     

Oxygen consumption and activity of the white sucker (Catostomus commersoni), in lethal and nonlethal levels of the organochlorine insecticide, methoxychlor

The survival, oxygen consumption and spontaneous activity of suckers were determined at 15°C in water containing different concentrations of methoxychlor in ethanol, ethanol, and no added substances. A dynamic bioassay was used to estimate the 96 h LC50, which was found to be 0·0345 ppm. Routine oxygen consumption was determined in a continuous-flow respirometer, and the activity was recorded in separate experiments by measuring the water disturbance using silver wire electrodes.After 24 h fish exposed to untreated, ethanol-treated and 0.01 ppm methoxychlor-treated water had oxygen uptake rates which were relatively constant and near standard levels. At 0.10 ppm methoxychlor (lethal to all fish within 85 h), oxygen consumption rates were 2–3.5 × as high as those of control fish. Activity also greatly increased. The fish lost their balance along with the coordination between opercular and locomotor movements. Suckers that died in 0.04 ppm methoxychlor showed oxygen uptake rates and poisoning symptoms similar to 0.10 ppm treated fish, while those that survived this treatment had rates similar to control fish. The increase in ventilation which accompanies this hyperactivity may result in increased uptake of insecticide and thereby explain the irreversible nature of the response.     

Oxygen transfer in a rotating disc treatment plant

In this paper experiments are described in a bio-disc pilot plant. A new method has been developed for a reproducible measurement of the thickness of the waterfilm on the rotating discs. The results were used to calculate the oxygen transfer coefficient into water (K_L). The values of K_L, calculated in this way, appeared to be considerably higher than experimental K_L-values, which is mainly due to the fact that the water layer on the rotating disc is outdistanced by the disc. This effect has not been taken into account in the literature so far.     

Classic and novel brominated flame retardants (BFRs) in common sole (Solea solea L.) from main nursery zones along the French coasts

Brominated flame retardants (BFRs) were investigated in juvenile common sole from nursery zones situated along the French coast in 2007, 2008 and 2009. Extensive identification was performed with regard to PBDEs, novel BFRs 1,2-bis(2,4,6-tribromophenoxy)ethane (BTBPE) and decabromodiphenylethane (DBDPE), and other non-PBDE BFRs, namely, hexabromobenzene (HBB) and 2,2′,4,4′,5,5′-hexabromobiphenyl (BB-153). Polybrominated diphenyl ether (PBDE) concentrations (Σ 14 congeners) ranged from 0.01 ng/g to 0.16 ng/g wet weight (ww) in muscle, and 0.07 ng/g to 2.8 ng/g ww in liver. Concentrations were in the lower range of those reported in the literature in other European locations. Lower PBDE concentrations, condition indices and lipid contents were observed in the Seine estuary in 2009, possibly in relation to a lower water flow. The PBDE patterns and ratios we observed suggested that juvenile sole have a relative high metabolic degradation capacity. Non-PBDE BFRs were detected at lower levels than PBDEs, i.e., within the < method detection limit - 0.005 ng/g ww range in muscle, and < method detection limit - 0.2 ng/g ww range in liver. The data obtained is of particular interest for the future monitoring of these compounds in the environment.     

A Microcomputer Model for Flood Prediction with Applications

Abstract: A generally applicable mathematical model, tailored for use on a Personal Computer, as the design tool to simulate unsteady flood flow in a network of interconnected rivers has been developed and applied to the Sham Chun River along the border between Hong Kong and the People's Republic of China. The effect on the improved Sham Chun River due to the proposed river training in the River Indus, one of its tributaries, is evaluated. The one-dimensional unsteady flow model itself is broadly applicable to a wide range of hydrologic conditions and varying field situations. It incorporates real hydraulic features including branched channels and 'tidal flats' flooding and drying. The time history of water stages and discharges are computed at any desired location throughout the connected essentially one-dimensional channel network subject to initial and boundary conditions. Details are given of techniques adapted in using the computational scheme to quantify the unsteady flow condition and the means to assure an efficient numerical solution as well as to verify the accuracy of the computed outputs by subjection to carefully selected schematic simplified test cases and real prototype cases with numerical solution method is a useful predictive engineering tool in river design.