ATM switching and CPE adaptation in the North Carolina InformationHighway

This article describes the approach which has been used to implement a sector of the information highway throughout the state of North Carolina, with specific attention focused on the functionality of the equipment that comprises the North Carolina Information Highway (NCIH). This implementation of this information highway is based on ATM technology, used in both the switching systems of the network and the customer premises equipment (CPE). The large ATM switching systems provide the extensive number of connections that are predicted for the information highway. Multiple services can also be supported on the ATM switches. The information streams for these different services can all be converted into ATM format using the appropriate ATM adaptation layer for transport through the ATM network. By being able to support multiple services, and transport them across common ATM facilities, the ATM switches offer the NCIH great flexibility in the applications that can be provided to the customers. Use of the ATM technology allows the NCIH to provide the backbone for various services. To provide the distance learning service application and other applications on the NCIH, ATM capabilities are also being provided in CPE on a service multiplexer     

Data to frequency mappings in various MSK schemes

Minimum shift keying (MSK) is a digital modulation scheme which is suited to demanding applications requiring good bandwidth efficiency and error performance. It can be regarded as continuous phase frequency shift keying (CPFSK) with two signalling frequencies. In general, there is no unique mapping from the input data polarity to the particular signalling frequency during a given bit interval. The simplest formulation maps zeros of the data (marks) to the lower frequency, and ones (spaces) to the higher frequency. Other formulations of MSK employ more complex mappings. The article summarises the most commonly encountered mappings, then shows how to convert from one formulation to another by manipulating the input or output data. It is, therefore, possible to establish communication between different MSK modems employing different formulations of MSK by simple processing of the data     

Measurement techniques for monolithic microwave integrated circuits

Introduces the basic technologies that are associated with measurements of monolithic microwave integrated circuits. The use of test fixtures and wafer probe stations at ambient room temperature is reviewed and their role at thermal and cryogenic temperatures is discussed. With the increasing need for performing non-invasive measurements, advances in experimental field probing techniques are explored     

The flagship is dropping behind the fleet [UK telecommunicationindustry]

Following privatisation in 1984, BT was mainly preoccupied with customer service, operating costs and business exploitation. BT, its competitors and the industry regulators now have to address major new network issues. Their success in meeting the challenges of the new technologies will have a major impact on the future of UK telecommunications equipment manufacturers. The author takes a hard look at the facts. He argues that duplicating local telecommunications plant is a mistake and should stop; price cap regulation produces the wrong result; and an authoritative engineering agency is needed to co-ordinate technology nationally     

Uniplanar techniques for monolithic microwave integrated circuits

`Uniplanar' techniques have recently been introduced for the design of monolithic microwave integrated circuits (MMICs). The aim of these techniques is to achieve a higher level of integration of circuitry and to overcome the need for through-substrate via holes and the related back-face processing steps. This is achieved by using coplanar waveguide (CPW), slotline, and miniature `thin-film microstrip' transmission-line media as opposed to conventional microstrip. The design and performance of a number of uniplanar MMIC couplers, amplifiers, and other test circuits fabricated using the GEC-Marconi (Caswell) foundry are described     

Phase II study of vinorelbine (Navelbine) in previously treated small cell lung cancer patients. EORTC Lung Cancer Cooperative Group

26 previously treated patients with progressive recurrent small cell lung cancer (SCLC) were given vinorelbine (Navelbine), 30 mg/m2 weekly. All patients had responded to first-line chemotherapy and were off therapy for at least 3 months. Partial response was observed in 4 out of 25 eligible patients (16%; 95% confidence interval 4-36%), stable disease in 7 patients and progression in 12 patients. The limiting toxicity was a non-cumulative leucopenia (80%, 32% WHO grade 3-4). Reaction at the site of injection was observed in 5 patients, causing treatment discontinuation in 2 cases. Other non-haematological toxicities were moderate. These results suggest acceptable toxicity and some antitumour activity of vinorelbine in pretreated SCLC patients.     

Thrombolytic therapy for unstable angina

Thrombolytic therapy for unstable angina has not gained acceptance as a primary treatment for unstable angina (UA) despite the evidence showing a reduction in mortality when these agents are given for myocardial infarction. The purpose of this review is to examine the clinical value of thrombolytic therapy for UA. The multiple lines of evidence supporting intracoronary thrombus formation as a key mechanism in the pathogenesis of UA are reviewed. Studies examining the effect of thrombolytic therapy on angiographic endpoints have shown little effect on the extent of luminal narrowing, but do reveal a decrease in angiographically detected thrombus. Twelve randomized, controlled trials of thrombolytic agents in 611 UA patients with predefined clinical endpoints have been published. These trials varied widely in design and adjunctive therapy both in treated and control grops. Review of these trials show a tendency to fewer clinical events such as death, infarction, and need for revascularization in treated patients, with a corresponding increase in bleeding complications. Clinical efficacy of thrombolytic therapy cannot be excluded by the available data, perhaps in part because of insufficient numbers of patients treated. Determination of the net clinical value of thrombolytic therapy must await larger and more definitive trials.     

Analysis of interfacial failure in a composite microbundle pull-out experiment

Modeling of the failure of polymer-matrix composites requires substantial information about the mechanisms of failure at the interface, and load redistribution around fiber breaks in the composite. Current interface experiments involving the use of ‘microcomposites’ of single embedded fibers in a matrix generally do not include all the key geometric features of the real composite; in particular, they do not include the effects of fiber volume fraction and the higher matrix shear resulting from closely neighboring fibers. A new experiment was recently devised to assess some of these effects: it is referred to as the single-fiber pull-out from microbundle (SFPOM) experiment. It consists of a hexagonal arrat of seven fibers in a matrix where the outer six fibers are restrained and the center fiber is pulled out. Recent experimental data from tests with this geometry are analyzed here using three mechanical models of the failure process, and parametric studies of the data are performed to assess the appropriateness of each model. Two of the models, based on fracture energy considerations as applied earlier to single embedded fibers in a matrix and adapted to our geometry, were found to model data from the SFPOM experiments poorly. The third model assumes the existence of three zones near a fiber break, including elastic, plastic and frictional debond zones, and was found to provide reasonable fit to the data under realistic assumptions.     

Development of an octocalcium phosphate cement

From previous studies it is known that alpha-tertiary calcium phosphate and dicalcium phosphate form a cement upon mixing with water. In this study this cement was optimized in terms of the milling of the constituents, their molar ratio, the amount of hydroxyapatite added and the water/powder ratio. The optimum Ca/P molar ratio of the cement mixture was 1.36±0.03. X-ray diffraction showed the reaction product to be octocalcium phosphate. Addition of precipitated hydroxypatite of over 3% diminished the final strength of the cement significantly. However, admixtures of only 2% of precipitated hydroxyapatite (a) kept the final compressive strength at 30±5 MPa after soaking in Ringers solution at 37°C, (b) diminished the initial setting time from 27.5 to 10 min and the final setting time from 65 to 40 min, (c) diminished the time in which the final strength was reached from 36 to less than 14 h. The tensile strength of this cement is 19±1% of its compressive strength. The optimum water/powder ratio as found in this study was 0.30 g/g.