PI control of discrete linear repetitive processes

Repetitive processes are a distinct class of 2D systems (i.e. information propagation in two independent directions) of both systems theoretic and applications interest. They cannot be controlled by direct extension of existing techniques from either standard (termed 1D here) or 2D systems theory. In this paper, we exploit their unique physical structure to show how two term, i.e. proportional plus integral (or PI) action, can be used to control these processes to produce desired behavior (as opposed to just stability).     

Octave-tunable miniature RF resonators

The development and testing of a miniaturized, high-Q, broadly tunable resonator is described. An exemplary device, with a center frequency that is continuously tunable from 1.2 to 2.6GHz, was tested in detail. Experimental results demonstrated a resonator Q of up to 380, and typical insertion loss of -1.9dB for a 25MHz 3-dB bandwidth. These resonators have been used to stabilize a broadly-tunable oscillator with phase noise of -132dBc/Hz at 100-kHz offset, with a center frequency tunable from 1.2-2.6GHz, and a tuning speed of 1GHz/ms.     

The impact of agricultural management practices on nutrient losses to water: data on the effects of soil drainage characteristics.

Against the background of increasing nutrient concentrations in Irish water bodies, this study set out to gain information on the potential of agricultural grassland to lose nutrients to water. Overland flow, flow from artificial subsurface drains and stream flow were gauged and sampled during heavy rainfall events. Dissolved reactive phosphorus (DRP), potassium (K), total ammonia (TA), and total oxidised nitrogen (TON) were measured in water samples. When the nutrient concentrations in water were examined in relation to the grassland management practices of the study catchments it emerged that soil P levels, the application of organic and inorganic fertilisers before heavy rainfall and the presence of grazing animals could all influence nutrient concentrations in surface and subsurface drainage water. Overall, the drainage characteristics of soil were found to have a considerable influence on the potential of land to lose nutrients to water.     

Anomalous splitting in microwave mode-beating spectra of semiconductor ring lasers

Mode-beating spectra are investigated in long-perimeter (1.028 cm) monolithically integrated multiple-quantum-well semiconductor ring lasers. The beating line near 8 GHz is found to be split into two components. With increasing pumping current, a normal component shifts to lower frequencies, while an anomalous higher-frequency component shifts in the opposite direction. It is suggested the anomalous blue-shifting line results from power-induced perturbation of the refractive index in the vicinity of a strong mode.     

A time-based energy-efficient analog-to-digital converter

Dual-slope converters use time to perform analog-to-digital conversion but require 2/sup N+1/ clock cycles to achieve N bits of precision. We describe a novel current-mode algorithm that also uses time to perform analog-to-digital conversion but requires 5N clock cycles to achieve N bits of precision via a successive subranging technique. The algorithm requires one asynchronous comparator, two capacitors, one current source, and a state machine. Amplification of two is achieved without the use of an explicit amplifier by simply doing things twice in time. The use of alternating voltage-to-time and time-to-voltage conversions provides natural error cancellation of comparator offset and delay, 1/f noise, and switching charge-injection. The use of few components and an efficient mechanism for amplification and error cancellation allow for energy-efficient operation: in a 0.35-/spl mu/m implementation, we were able to achieve 12 bit of DNL limited precision or 11 bit of thermal noise-limited precision at a sampling frequency of 31.25 kHz with 75 /spl mu/W of total analog and digital power consumption. These numbers yield a thermal noise-limited energy efficiency of 1.17 pJ per quantization level, making it one of the most energy-efficient converters to date in the 10-12 bit precision range.     

A 4-MB on-chip L2 cache for a 90-nm 1.6-GHz 64-bit microprocessor

A 4-MB L2 data cache was implemented for a 64-bit 1.6-GHz SPARC(r) RISC microprocessor. Static sense amplifiers were used in the SRAM arrays and for global data repeaters, resulting in robust and flexible timing operation. Elimination of the global clock grid over the SRAM array saves power, enabled by combining the clock information with array select signals. Redundancy was implemented flexibly, with shift circuits outside the main data array for area efficiency. The chip integrates 315 million transistors and uses an 8-metal-layer 90-nm CMOS process.     

Multiple quasi-phase-matched device using continuous phase modulation of /spl chi//sup (2)/ grating and its application to variable wavelength conversion

We propose a new multiple quasi-phase-matched wavelength converter based on the continuous phase modulation of a /spl chi//sup (2)/ grating for use in variable wavelength conversion. A numerical study shows that the proposed device exhibits a high conversion efficiency, flexible design, and robust fabrication tolerance. A waveguide device fabricated by annealed proton exchange agrees well with the numerical design. Fine-tuning the device enabled us to demonstrate variable wavelength conversion between signals on the standard optical frequency grid. Using the device, we also demonstrated fast (<100 ps) wavelength switching of 4-channel 40-Gb/s signals. The obtained results clearly show that the proposed multiple quasi-phase-matched devices will be useful when constructing future flexible photonic networks.     

Opening the terahertz window with integrated diode circuits

The terahertz region of the electromagnetic spectrum, spanning from 100 GHz through 10 THz, is of increasing importance for a wide range of scientific, military and commercial applications. This interest is spurred by the unique properties of this spectral band and the very recent development of convenient terahertz sources and detectors. However, the terahertz band is also extremely challenging, in large part because it spans the transition from traditional electronics to photonics. This paper reviews the importance of this frequency band and summarizes the efforts of scientists and engineers to span the "terahertz technology gap." The emphasis is on solid-state circuits that use nonlinear diodes to translate the functionality of microwave technology to much higher frequencies.     

Gaussian Cramer-Rao bound for direction estimation of noncircular signals in unknown noise fields

This paper focuses on the stochastic Cramer-Rao bound (CRB) on direction of arrival (DOA) estimation accuracy for noncircular Gaussian sources in the general case of an arbitrary unknown Gaussian noise field parameterized by a vector of unknowns. Explicit closed-form expressions of the stochastic CRB for DOA parameters alone are obtained directly from the Slepian-Bangs formula for general noncircular complex Gaussian distributions. As a special case, the CRB under the nonuniform white noise assumption is derived. Our expressions can be viewed as extensions of the well-known results by Stoica and Nehorai, Ottersten et al., Weiss and Friedlander, Pesavento and Gershman, and Gershman et al. Some properties of these CRBs are proved and finally, these bounds are numerically compared with the conventional CRBs under the circular complex Gaussian distribution for different unknown noise field models.     

Investigation of texture effect on visual colour difference evaluation

The texture effect on visual colour difference evaluation was investigated in this study. Five colour centers were selected and textured colour pairs were generated using scanned textile woven fabrics and colour‐mapping technique. The textured and solid colour pairs were then displayed on a characterized cathode ray tube (CRT) monitor for colour difference evaluation. The colour difference values for the pairs with texture patterns are equal to 5.0 CIELAB units in lightness direction. The texture level was represented by the half‐width of histogram, which is called texture strength in this study. High correlation was found between texture strength and visual colour difference for textured colour pairs, which indicates that an increasing of 10 units of texture strength in luminance would cause a decreasing of 0.25 units visual difference for the five colour centers. The ratio of visual difference between textured and solid colour pairs also indicates a high parametric effect of texture. © 2005 Wiley Periodicals, Inc. Col Res Appl, 30, 341–347, 2005; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/col.