Voltage transfer function synthesis using current conveyors

A synthesis procedure for generating current conveyor active filters is presented, and a novel network which realises the general 2nd-order voltage transfer function is given.<>     

Fast search techniques for use in vector quantisation and related pattern matching applications

Two techniques for the design and fast search of a vector quantiser codebook are proposed. These classify speech data vectors according to (i) the sign and (ii) the slope between successive samples. With both techniques the performance obtained is superior to that obtained from a conventional gain/shape vector quantiser and comparable to that of a full search vector quantiser. A major attraction of both approaches is that they significantly reduce the number of computations required for the codebook search.     

A 16-Mbit/s adapter chip for the IBM token-ring local area network

The authors describe a 9.02×9.02-mm chip built in 1-μm CMOS with two levels of metal and an additional mask level for fabricating capacitors. It contains both analog and digital circuits and has provisions for self-test. The function includes the transmitter, receiver, protocol handler, an microprocessor, as well as interfaces for RAM/ROM storage, IBM PC bus, IBM PS/2 bus, IBM 3174 bus, and Motorola 68000 bus. The physical design terrains are formed by 24K circuits of standard cell gates, a 10K-circuit equivalent hand-honed custom microprocessor, and an analog macro. The chip operates from a single 5-V supply, and the power consumption is 0.8 W nominal at 16 Mb/s. The chip can also be operated at 4 Mb/s     

Optimal characteristic polynomials for digital multistep pseudorandom numbers

The digital multistep method generates uniform pseudorandom numbers by transforming sequences of integers obtained by multistep recursions. The statistical independence properties of these pseudorandom numbers depend on the characteristic polynomial of the recursion. We describe a method of calculating characteristic polynomials that are optimal with respect to statistical independence of pairs of successive pseudorandom numbers. Tables of such optimal characteristic polynomials for degrees ≤64 are included.     

Absolute Measurements of the Magnetic Field Generated by Different Coils in the Center of EGYPTOR Tokamak

The present work is devoted to measure the absolute magnetic field produced by different coils in the EGYPTOR tokamak using a calibrated pickup coil. Scaling these measurements in different equations connected with the discharge currents from each supply system are performed. The pickup coil used in the present study is well calibrated with Helmholz coils at the IPP in Prague, Czech Republic. A 0.2% deviation has been found between an evaluation done in the present study and the calibration using Helmholz coils. Experimental measurements of the toroidal magnetic field are in good agreement with calculations to within 2%. Very low values of stray magnetic field components arising from TF and OH coils are recorded which proves that the compensation coils for these components are sufficient.     

Controlled undercooling of liquid iron in contact with ZrO2 and MgO substrates under varying oxygen partial pressures

The objective of this study is to determine the conditions under which the inclusions present in liquid steel can act as heterogeneous nucleants for solidification. In order to study the factors that define the undercooling of a given metal/oxide couple, the undercooling of a pure iron sessile droplet in contact with Al₂O₃, ZrO₂, and MgO substrates was measured under controlled oxygen partial pressures by observing droplet recalescence. The results showed that the undercooling of iron, in contact with a particular substrate, did not have a unique value, but was significantly affected by the oxygen content on the gas phase. For oxygen partial pressures between 10⁻²¹ and 10⁻¹⁹, the undercooling of iron on ZrO₂ substrates was stable and around 290 °C. In the same range of oxygen partial pressure, the undercooling of iron on MgO substrates remained below 100 °C due to the low stability of this oxide. At lower oxygen contents, substrate decomposition might be the cause for the observed drop in the undercooling of iron on ZrO₂ substrates to below 100 °C. The undercooling also decreased for increasing oxygen content as verified when the gas was changed from gettered Ar/Ar-H₂ to CO/CO₂ mixtures. The variation in undercooling was related to the wetting of the substrate by the liquid metal, where the deep undercooling observed in the ZrO₂ experiments occurred when the highest contact angle between the liquid metal and the substrate was achieved.