仿真系统互操作性研究

如何提升系统的互操作性是当前仿真领域需要着力解决的问题,而理解互操作问题产生的根源则是提升互操作性的前提。从互操作性的概念分析人手,剖析了仿真系统互操作问题产生的原因,将之概括为组织、抽象和实现三个层面,并提出了相应的解决框架。框架通过建立概念模型库和平台无关模型库解决抽象层面的问题,利用模型实现的自动化和服务化解决实现层面的问题,可以作为领域内解决互操作问题的借鉴。最后提出了使用对比法和测试法评估系统互操作性的思路。     

仪表空气干燥器控制系统的升级改进

利用工厂现有优势资源,自主对故障率逐步升高的仪表空气干燥器控制系统进行升级改进,从而提高重要单元设备运行的可靠性。     

基于DeviceNet的PowerFlex70变频器的远程控制

介绍DeviceNet的特点以及AB变频器接入DeviceNet的硬件和软件结构,并提出在DeviceNet环境下对变频器进行实时监控的方法。     

节能型电磁装置电控系统设计

介绍节能型电磁装置,采用PLC,设计其电控系统。     

Binary particle swarm optimization with multiple evolutionary strategies

This paper introduces a novel variation of binary particle swarm optimization(BPSO) algorithm and a further extension to improve its performance.Firstly,mimicking the behaviors of some creatures group,multiple evolutionary strategies BPSO(MBPSO) is introduced which takes different evolutionary strategies for various particles according to their performances.Then,on the basis of MBPSO,a new strategy is discussed to improve the performance of the MBPSO(M2BPSO) which adopts the concept of the mutation operator aiming to overcome the premature convergence and slow convergent speed during the later stages of the optimization.The proposed two algorithms are tested on seven benchmark functions and their results are compared with those obtained by other methods.Experimental results show that our methods outperform the other algorithms.     

Joint spatial registration and multi-target tracking using an extended PM-CPHD filter

An extended product multi-sensor cardinalized probability hypothesis density (PM-CPHD) filter for spatial registration and multi-target tracking (MTT) is proposed. The number and states of targets and the biases of sensors are jointly estimated by this method without the data association. Monte Carlo (MC) simulation results show that the proposed method (i) outperforms, although computationally more expensive than, the extended multi-sensor PHD filter which has been proposed for joint spatial registration and MTT; (ii) outperforms the multi-sensor joint probabilistic data association (MSJPDA) filter which is also extended in this study for joint spatial registration and MTT when the clutter is relatively dense.     

油罐常用安全附件的维护与保养

目前油田使用的各式储罐基本上可分为钢制拱顶地上油罐和单盘式外浮顶储油罐两大类。这些储罐在日常运行和维护保养中的操作比较繁琐,带来的安全隐患也比较多,尤其是油罐安全附件的安全运行、检查、维护与保养,都关系到油区的日常安全生产。文章从日常运行管理方面,探讨了日常使用的油罐安全附件的日常运行、安检、维护和保养方法。     

储能设备获最大功率的改进型光伏充电系统设计

针对光伏充电系统中能量利用率不高的问题,给出了改进型光伏充电系统的硬件及软件系统的设计方法。该系统基于低功耗单片机MSP430F1611,利用扰动观察法,通过控制数字电位器来间接调节MPPT变换器的输出电压,从而光伏电池功率与MPPT变换器效率在比值最优的情况下,可使得储能设备获得最大功率。经过仿真验证,该方法可以达到预期的效果,储能设备在同等条件下能获得更多的电能。     

一种新的纸基微流开关及其活跃方法

提出了一种新的、基于声表面波的纸基微流开关。通过软光刻技术制作内含两个微孔的聚二甲基硅氧烷(PDMS)微架,其上固定经折叠、长度可变的纸通道。PDMS微架贴附于压电基片之上,并在待连接的两微通道之下方,折叠纸通道最低端离压电基片间距为2 mm。压电基片上采用微电子工艺光刻一对叉指换能器和反射栅。当足够强度的电信号加到叉指换能器对时,激发两相向声表面波,使得压电基片上微流体输运到折叠纸通道,改变其长度,连接其上待连通的两纸基微通道,完成开关功能。对可编程微流器件提供了一种新的编程和开关控制方法。