溶聚丁苯橡胶聚合溶液粘度的研究

研究了（乙二醇二甲醚、二乙二醇二甲醚）－正丁基锂－抽余油体系地溶聚乙苯橡胶不同聚合时间聚合溶液粘度的变化，发现聚合溶粘度与活性种的活性有关，高温严重破坏活性种的活性，计节剂量是杀死活性种活性的另一因素。同时考察了不同苯乙烯／丁二烯（S／B）体系，正丁基锂引发剂用量对聚合粘影响规律，发现S／B越大，聚合粘度越小，S／B越小，聚合粘度越大，引发剂用量减少，聚合液粘度增大。     

Ni-Mo-O催化剂中协同作用对丙烷氧化脱氢的影响

在 Ni-Mo-O体系中 ,加入 Mo O3 能极大地提高丙烷氧化脱氢制丙烯的反应活性。选用固混法、沉淀法、柠檬酸法制备了 Mo O3 过量 1 5 % (摩尔分数 )的α -Ni Mo O4催化剂 ,其中用沉淀法制得催化剂在 5 0 0℃ ,V( C3 H8) /V ( O2 ) /V ( N2 ) =1 0 /1 0 /5 0 ,反应气流量为 70 m L/min的条件下丙烷转化率可达 38.7% ,丙烯选择性达 70 .1 4 %。经 XRD,XPS,TPR表征说明 ,在含有过量 Mo O3 的催化剂中 ,α -Ni Mo O4与 Mo O3 两种晶体之间可产生微小的相互吸引 ;从而发挥协同作用 ,是提高催化剂活性     

浓缩大豆磷脂制取工艺及设备的研究

对水化油脚采用新工艺和新设备制取浓缩大豆磷脂，并对制取浓缩大豆磷脂的影响因素进行分析和优化，得到了制取浓缩大豆磷脂新工艺和最佳工艺参数。     

PP-g-MAH对PA6/PP/TLCP三元共混物的增容改性作用

研究了PP-g-MAH对PA6／PP／TLCP三元共混体系的增容作用以及对共混物流变性能和力学性能的影响。通过共混物的DSC、SEM、POM、流变性能和力学性能测试，结果表明，PP－g-MAH对共混体系有明显的增容作用，共混物的力学性能（拉伸强度和冲击强度）得到提高；由于TLCP的加入，共混物的熔体粘度大大低于PA6的熔体粘度。     

MPEG-4自然视频编码技术

对MPEG－4自然视频编码的关键技术作了详细的分析和阐述。首先介绍MPEG－4频语法结构，并对视频编码的框架概要分析。接着分析了自然视频编码中涉及到的关键技术，包括：VOP的产生；二值和灰度级α平面的编码技术；运动估计和补偿方法；纹理编码；基于对象的时间分级和空间分级；MPEG－4提供的再同步和各种错误掩盖，刷新方法，精 编码技术和零树小波基的静止图像编码技术。指出MPEG－4和MPEG－1，MPEG－2等标准的异同，突出MPEG－4的三个主要特点。最后给出MPEG－4技术在网络视频传输中的应用，并给出测试和分析。     

Shrinkage and splitting of microcracks under pressure simulated by the finite-element method

The two-dimensional finite-element method is applied to analyze the shrinkage and splitting of microcracks regularly arranged on or perpendicular to a grain boundary under pressure. Grain-boundary and surface diffusions are coupled by the boundary conditions at the triple point of the microcrack surface and the grain boundary. The shrinkage and splitting processes for the two kinds of microcracks are revealed by detailed finite-element analyses. For the microcrack lying on a grain boundary, it first shrinks to a small void shape, then the void is split by the grain boundary and the two split voids assume a cylindrical shape under the capillary force of the surface. For the microcrack perpendicular to the grain boundary, it is split into two segments by the grain boundary during the early stage of shrinkage. Then, the split microcracks stop shrinking and evolve into two cylindrical channels with a circular section by the capillary force of the surface. These evolution processes are controlled by the applied pressure, microcrack spacing, ratio of grain-boundary diffusion to surface diffusion, and equilibrium dihedral angle, defined by surface and grain-boundary tensions. The influences of these controlled parameters on the evolution processes are numerically clarified based on a great number of finite-element analyses.     

优化印制电路板地线设计

印制电路板地线是印制电路板设计的一个基本问题，本文详细分析了印制电路板地线对电路的干扰，介绍了减小地线对电路干扰的方法，阐述了印制电路板地线的设计规则，将其应用到实际的印制电路板设计中，可大大提高印制电路板的抗干扰能力，实现电磁兼容。     

长庆上古生界气层CO2增能压裂工艺

长庆上古气藏物性差,压力系数低,水锁伤害大,采用常规水力压裂,入井液返排困难,气井产量低。在储层改造地质研究的基础上,通过对CO2泡沫压裂技术进行室内攻关,引进开发了CO2泡沫压裂酸性交联技术,优化了CO2泡沫方案设计及现场施工工艺,配套了CO2增能压裂工艺技术。经过现场应用,充分说明了CO2增能压裂是一项行之有效的工艺技术,对于提高单井产量和长庆气田整体开发水平都是有益的。     

Iterative receivers for space-time block-coded OFDM systems indispersive fading channels

We consider the design of iterative receivers for space-time block-coded orthogonal frequency-division multiplexing (STBC-OFDM) systems in unknown wireless dispersive fading channels, with or without outer channel coding. First, we propose a maximum-likelihood (ML) receiver for STBC-OFDM systems based on the expectation-maximization (EM) algorithm. By assuming that the fading processes remain constant over the duration of one STBC code word and by exploiting the orthogonality property of the STBC as well as the OFDM modulation, we show that the EM-based receiver has a very low computational complexity and that the initialization of the EM receiver is based on the linear minimum mean square error (MMSE) channel estimate for both the pilot and the data transmission. Since the actual fading processes may vary within one STBC code word, we also analyze the effect of a modeling mismatch on the receiver performance and show both analytically and through simulations that the performance degradation due to such a mismatch is negligible for practical Doppler frequencies. We further propose a turbo receiver based on the maximum a posteriori-EM algorithm for STBC-OFDM systems with outer channel coding. Compared with the previous noniterative receiver employing a decision-directed linear channel estimator, the iterative receivers proposed here significantly improve the receiver performance and can approach the ML performance in typical wireless channels with very fast fading, at a reasonable computational complexity well suited for real-time implementations