Schrifttumsberichte

Ohne Zusammenfassung     

Effects of microelements on soil nematode assemblages seven years after contaminating an agricultural field

Long-term effects of Cd, Cr, Cu, Se and Zn were studied 7 years after artificially contaminating plots of an agricultural field on a calcareous chernozem soil. Effects of three to four different contamination levels (originally 10, 30, 90 and 270 mg kg⁻¹) were studied. Nematode density was significantly reduced by 90 and 270 mg kg⁻¹ Se as well as by 270 mg kg⁻¹ Cr, while 90 and 270 mg kg⁻¹ Se also reduced nematode generic richness. Maturity Index values (calculated for c-p 2–5 nematodes) consistently decreased with increasing Cr and Se concentration and to a lesser extent in Zn plots as well. Structure Index showed decreasing trends in increasing Cr, Se and (to a lesser extent) in Zn treatments, while in Cd it shows a moderate increase. Distribution of c-p groups was negatively affected by the increasing Cr and Se concentration, while in Zn plots, this decrease was not significant. Response of feeding groups to pollutions was similar to other parameters: Cr and Se caused significant changes toward the loss of variability. The proportion of the most sensitive omnivorous and predatory nematodes decreased clearly as a consequence of Cr and Se treatments. Zn pollution also resulted in a slight decrease in this group, while Cd caused an increase. Nematode diversity profiles showed a significant decrease in the plots of increased Cr and Se concentrations, while increased concentrations of Cu and Zn resulted in ambiguous effects. Besides providing evidence on the harmful effects of Cr and Se on a soil nematode assemblage, our results suggest that simultaneous analysis of Maturity Index, Structure Index and diversity profiles provide a promising tool in nematological indication of soil pollution.     

Characterization of Oleogels Based on Waxes and Their Hydrolyzates

In this paper, the structuring of liquid oils, also known as oleogelation, is systematically investigated for the first time using a quasi-quaternary mixing system approach. Native waxes with different quantities of wax esters (WE), n-alkanes (hydrocarbons (HC)), fatty acids (FA), and fatty alcohols (FaOH) are applied in mixtures with hydrolyzed waxes to systematically change the composition. Hydrolyzed waxes contain high levels of FA and FaOH. The model systems are investigated on microscopic level (brightfield light microscopy (BFM), cryogenic scanning electron microscopy (cryo-SEM)) as well as on their macroscopic properties (rheology, gel hardness) and calorimetric behavior (differential scanning calorimetry (DSC)). It is found that sunflower wax (SFW)-based gels (12% structurant) become less hard on any admixture. Beeswax (BW)-based gels show significant increases in hardness when 25% and 50% (w/w) hydrolyzate are admixed. This could be related to stepwise crystallization. Further analysis reveals that the dissolution/melting behavior of the wax ester mixtures can be surprisingly well described as ideal solubility of a single pseudocomponent. The approach to unravel the individual contributions of the different species present in waxes is successful and marks a first step to better understand the systematic of wax functionality as oleogelators. Practical Application: The substitution of hardstock fats in structured oil phases is of interest for two reasons. The improved nutritional profile oleogels offer are beneficial for public health while the elimination of palm oil based ingredients appears to be a general public desire. Among the technical solutions for non-TAG oil structuring waxes are very promising. This is primarily due to their availability, prior consumption, potentially low cost for functionality. Currently waxes are technically and scientifically wrongly treated as single components. In order to better utilize the potential of waxes and design future sourcing strategies it is necessary to understand the wax functionality at a compositional/molecular level. This contribution marks the first step into this direction by considering classes of molecules with respect to their contribution to functionality. This understanding is considered as a key for future compositional design.     

Egg handling and storage

The relative importance of fat and lean tissue mass in determining bone mineral mass among postmenopausal women was examined in this 1-year longitudinal study. Fifty postmenopausal Caucasian women entered the study; 45 of them completed a 1-year follow-up. Dual-energy X-ray absorptiometry was employed for measuring total and regional bone mineral density (BMD) and bone mineral content (BMC), fat tissue mass (FTM), lean tissue mass (LTM), and body weight. Results from linear regression analysis using the cross-sectional data (n = 50) of the study indicated that LTM explained a larger percentage of variation in bone mineral mass than did FTM. FTM and LTM were found to be moderately correlated (r = 0.55); when FTM was entered in the same predicting regression models, LTM was a significant predictor (p < 0.05) of the total and regional BMC, but not BMD. The percent FTM (and inversely %LTM) was correlated with BMD and BMC, but significant correlation was primarily found only for total body BMD (or BMC). Weight was the best predictor of total body BMD and BMC. Longitudinally (n = 45), annual changes in both FTM and weight were significantly associated with annual changes in regional BMD after adjustment for initial bone mineral values (p < 0.05). We conclude that bone mineral mass is more closely related to LTM than to FTM, while annual changes in regional BMD are more closely correlated with changes in FTM in healthy postmenopausal women. Meanwhile, increased body weight is significantly associated with increased bone mineral mass.     

First experiences with the modelling and simulation package MIRACLES applied to a picture archiving and communication system (PACS) in a clinical environment

Since the construction of picture archiving and communication systems (PACS) appears to be extremely difficult, computer modelling and simulation are used as decision support tools. The package MIRACLES (Medical Image Representation, Archiving and Communication Learned from Extensive Simulation) has been developed at BAZIS in order to support the construction of simulation models of image information systems. This article discusses the application of MIRACLES to a prototypical PACS as being installed in a clinical environment. Attention is focussed to the required system analysis and difficulties which arose during the construction of the simulation model. The emphasis is on the presentation of the results of the simulation study, which show that simulation can be fruitfully used to predict, to analyse and to assist in solving performance problems. The simulation study confirmed assumptions and suppositions concerning both the system performance itself and strategies to improve the performance. The study also resulted in a number of concrete recommendations which might be useful for the set-up of the prototypical PACS.     

Improving metastable impact electron spectroscopy and ultraviolet photoelectron spectroscopy signals by means of a modified time-of-flight separation

The separation of ultraviolet photoelectron spectroscopy (UPS) and metastable impact electron spectroscopy (MIES) is usually performed by a time-of-flight (ToF) separation using pre-set ToF for both types of signal. In this work, we present a new, improved ex situ signal separation method for the separation of MIES and UPS for every single measurement. Signal separation issues due to changes of system parameters can be overcome by changing the ToF separation and therefore allowing for the application of a wider range of measuring conditions. The method also enables to identify and achieve separation of the two signals without any time consuming calibration and the use of any special material for the calibration. Furthermore, changes made to the discharge source are described that enable to operate an existing MIES/UPS source over a broader range of conditions. This allows for tuning of the yield of UV photons and metastable rare gas atoms leading to an improved signal to noise ratio. First results of this improved setup are well in agreement with spectra reported in literature and show increased resolution and higher signal intensities for both MIE and UP spectra compared to the previous, non-optimized setup.     

Realization strategies of dedicated path protection: A bandwidth cost perspective

Communication networks have to provide a high level of availability and instantaneous recovery after failures in order to ensure sufficient survivability for mission-critical services. Currently, dedicated path protection (or 1 + 1) is implemented in backbone networks to provide the necessary resilience and instantaneous recovery against single link failures with remarkable simplicity. However, in order to satisfy strict availability requirements, connections also have to be resilient against Shared Risk Link Group (SRLG) failures. In addition, switching matrix reconfigurations have to be avoided after a failure in order to guarantee instantaneous recovery. For this purpose, there are several possible realization strategies improving the characteristics of traditional 1 + 1 path protection by lowering reserved bandwidth while conserving all its favorable properties. These methods either utilize diversity coding, network coding, or generalize the disjoint-path constraint of 1 + 1.In this paper, we consider the cost aspect of the traditional and the alternative 1 + 1 realization strategies. We evaluate the bandwidth cost of different schemes both analytically and empirically in realistic network topologies. As the more complex realizations lead to NP-complete problems even in the single link failure case, we propose both Integer Linear Programming (ILP) based optimal methods, as well as heuristic and meta-heuristic approaches to solve them. Our findings provide a tool and guidelines for service providers for selecting the path protection method with the lowest bandwidth cost for their network corresponding to a given level of reliability.     

Electrosynthesis and comparative studies on carboxyl-functionalized polythiophene derivatives

Electrochemical synthesis of a novel carboxylic acid functionalized polythiophene – poly(3-thiophene-butyric-acid), PTBA – has been realized. Its morphology, electrochemical, spectral and conducting properties have been compared to those of poly(3-thiophene-acetic-acid), PTAA, which is widely used to immobilise both bioactive molecules and inorganic nanoparticles. According to scanning electron microscopic (SEM) images, the difference in the real and geometric surface area of the modified electrodes is much more expressed in the case of PTBA. Both the symmetry of the cyclic voltammograms and the concurrent, sustained optical changes proved that this polymer possesses an improved and more stable redox activity. According to simultaneously performed in situ ac. impedance and UV–Vis measurements, both films could be uniformly transformed between the insulating and conducting forms, but PTAA exhibited some degradation. The development of the conducting state during the redox switching of both thiophene derivative polymers proved to be primarily connected to the formation of di-cationic species. The electrochemical quartz crystal microbalance (EQCM) results evidenced also differences between the two polymers, which difference can be interpreted by assuming the more expressed effect of the deprotonation-connected (self-) doping process in PTAA. The results confirm that the new conducting polymer, PTBA is much more convenient for being considered as the polymer matrix of practically applicable composites.     

A process for the production of a diacylglycerol‐based milk fat analogue

We propose a novel process for the production of a DAG‐rich acylglycerol mixture derived from milk fat. This product has potentially interesting nutritional properties, derived from both its high content of DAG and of short‐chain fatty acids (FAs). The proposed process consists of three steps: lipase‐catalysed partial ethanolysis of milk fat, extraction of the by‐product fatty acid ethyl esters (FAEEs) using supercritical carbon dioxide (SC‐CO₂) and isomerization of DAG to increase the proportion of 1,3‐DAG. The experimental investigation of the process steps was done using milk fat and trilaurin. Several lipases were tested for maximizing the percentage of DAG in the acylglycerol mixture produced by ethanolysis. The selectivity of the chosen lipase was such that the produced AG mixture was enriched in short‐chain FAs in relation to the original milk fat. FAEEs were completely extracted from the ethanolysis mixture by SC‐CO₂. In the final process step, we explored the reaction conditions for facilitating acyl migration in the DAG mixture, so that the equilibrium proportion of 1,3‐DAG (～64%) was attained. Our results set the basis for the development of a simple process for the production of a DAG‐rich milk fat analogue.