内转子的冷挤压成形工艺及模具设计

介绍了内转子零件的冷挤压成形工艺及其模具设计。     

Preparation and characterization of TiO2 photoelectrode codoped with aluminum and boron and its application in dye-sensitized solar cell

Nanocrystalline titania films codoped with aluminum and boron were prepared by cathodic vacuum arc deposition. In the process, titanium alloy target was used under an O2/Ar atmosphere, and sensitization of films were carried out by natural dye-sensitized complex in anhydrous ethanol. The structure, surface morphology and UV-vis spectra of titania films codoped were measured by X-ray diffraction analysis, scanning electron microscopy and ultraviolet-visible spectrometer. Theas-deposited films are found to be amorphous. The films annealed were examinedto be of anatase structure with orientation along the (101) planes, the averagecrystal size is in the range between 41 and 45 nm. SEM results show that thereare some pores in the codoped titania films, the optical properties of the dye-sensitized films were also measured which reveals that the spectral responses of films shift to the visible region. Under simulated sunlight illumination, the overall energy conversion efficiency of dye-sensitized nanocrystalline solar cell is 0.9%.     

Formation and thermal stability of amorphous Ni-Mo-P alloys

The experimental researches on the chemical deposition of Ni-Mo-P amorphous alloys were carried out by adding Na2 MoO4 into acidic solutions. The optimum technology conditions were obtained by orthogonal design experiments. The structures and the relationship between compositions and their thermal stability were studied by energy spectrum (EC), scanning electron micrograph and X-ray diffraction spectrum. Compared with Ni-P amorphous alloys, the Ni-Mo-P amorphous alloys have high crystallization temperature and thermal stability, and the hardness reaches its peak when the annealing temperature is 500 ℃. With the increase of the heat treatment temperature, the surface morphology of the alloys changes.     

冷轧工作辊摩擦不稳定分析及其抑制对策

对冷轧机工作辊由于摩擦力引起的垂直、横向振动作了定性分析，指出了它们的危害，提出了预防措施。     

软起动器和变频器的时分多机复用技术及其应用

本文提出了时分多机复用的概念，并对其技术和应用加以具体说明，展现了该技术良好的应用前景。     

ZL114铝合金激光--龟弧的复合焊接

设计了一种激光-电弧复合热源焊接ZL114合金的新工艺，并对焊后的试件进行了X光检测、抗拉强度和全相组织等实验。结果表明，该种新工艺对铝合全有良好的适应性和可行性，是焊接领域的一个趋势。     

CA6140车床数控改造中机械装置设计技巧

介绍了普通车床数控改造中机械装置的几个独特设计，使得数控车床纵向进给系统结构更简单、性能更可靠、装拆更方便。     

高效动态存储再分配方案与实现

为提高大小和数量都不确定的数据动态存储的空间利用率和处理速度,针对常规系统动态存储分配存在的问题,提出一种高效的动态存储再分配方案。通过减少系统动态存储分配的执行次数,在有效提高存储空间利用率的同时,提高存储空间动态分配的速度,给出动态存储再分配方案的具体实现算法,用实际数据对其性能进行测试。测试结果表明,该方案能节省36％至75％的系统存储空间,分配速度提高了20至50倍。     

Trust-based group services selection in web-based service-oriented environments

Multi-agent technologies have been widely employed for the development of web-based systems, including web-based e-markets, web-based grid computing, e-governments and service-oriented software systems. In these service-oriented systems, service provider agents and service consumer agents are autonomous and rational entities, which can enter and leave the environments freely. For simplicity, we use terms ‘provider’ and ‘consumer’ to represent this two types of agents. How to select the most suitable service providers according to a service request from a consumer in such an open environment is a very challenging issue. In this paper, we propose an innovative trust model, called the GTrust model, for service group selection in general service-oriented environments. In the GTrust model, the trust evaluation for a service group is based on the functionality coverage of the group, the dependency relationships among individual services in the group, the ratings of individual services on the attributes of the service request and a similarity measurement of the extent to which reference reports can reflect the service request in terms of the priority distribution of attributes. The experimental results and analysis demonstrate the good performance of the GTrust model on the service group selection in service-oriented environments.