微观尺度下单晶铜熔点多因素影响的分子动力学模拟研究

基于分子动力学方法,利用嵌入原子势(EAM)函数,在微观尺度下研究了影响单晶铜熔点的多种因素。首先利用势函数计算单晶铜的晶格常数和弹性常数,以此验证本研究所采用势函数的准确性,然后利用能量体积法、径向分布函数法和键对分析技术对模拟得到的结果进行分析,测得单晶铜熔点约为1 380K。分析了模型大小、升温速率、晶体缺陷对铜熔点的影响,研究发现模型大小、升温速率对熔点的影响不大,随着升温速率的增大,达到熔点所需的时间越短。晶体缺陷的存在使金属材料晶格点阵稳定性下降,熔化需要的热量减少,熔点相应降低,与实际熔点情况一致。     

墨汁碳纳米粒增强壳聚糖复合膜的制备及性能研究

利用墨汁中碳纳米粒为增强体,以流延法制备墨汁/壳聚糖复合膜。采用扫描电子显微镜(SEM)对复合膜的结构进行了表征,研究不同的墨汁加入量对墨汁/壳聚糖复合膜力学、耐水以及光透过率等性能的影响。结果表明低含量墨汁中碳纳米粒可均匀分散在壳聚糖基体中。与纯壳聚糖膜相比,加入墨汁后的复合膜的力学性能和耐水性能得到了明显的提高。复合膜的光透过率随着复合膜中墨汁含量的增加急剧下降,具有非常优异的光阻隔性能。     

面向3D打印机的彩色三维模型成型技术

针对3D打印技术打印速度慢、打印精度低、不能多色打印等缺陷,研究3D打印机的STL文件载入和读取、基于OpenGL的模型显示、彩色图片像素采集以及基于RGB颜色空间的数据处理算法等技术,以便将数据转化成相应的G代码发送给下位机.     

Enhanced Thermal Conductivity of 5A Molecular Sieve with BNs Segregated Structures

5A molecular sieves have been widely used as adsorbents in cryogenic distillation for hydrogen isotope separation in fusion reactor engineering, but its low thermal conductivity is detrimental to the process stability. Improving the thermal conductivity of 5A molecular sieves is one of the most important goals for high‐performance devices. Here, firm segregated structures with boron nitride sheets (BNs) are constructed around 5A molecular sieve particles. SEM results show 30 µm BNs tend to form the better networks in comparison with that of 0.12 µm BNs at 40 wt% loadings. It is further verified that BNs with the larger size promote the thermal conductivity. Meanwhile, the thermal conductivity increases with the increasing amounts of BNs. XRD and specific surface area results indicate that the sintering and the addition of BNs exert negligible effects on the structure of 5A molecular sieve. These results indirectly show 5A molecular sieve with BNs segregated structures is very likely to be used for the application of hydrogen isotopic separation. Besides, this work provides new insight into the construction of segregated structure in inorganic porous materials.

     

脒端基对聚丙烯腈原丝氧碳化行为的影响

以偶氮二异丁脒盐酸盐(AIBA)、偶氮二异丁腈(AIBN)为引发剂,分别制备了具有不同端基结构的丙烯腈与衣康酸共聚物PAN-AIBA和PAN-AIBN,采用湿法纺丝技术制备PAN原丝。采用两种梯度升温方式对PAN原丝进行热稳定化处理,对优选的预氧化纤维进行高温碳化制得碳纤维。采用多种手段表征纤维结构与组成的变化规律。结果表明,脒端基可提高PAN预氧纤维的相对环化率,使其氧含量和体密度平稳增长,因此有利于预氧化纤维的结构调控。PAN-AIBA基碳纤维的皮芯结构差异小于PAN-AIBN基碳纤维,与其相对温和的热稳定化行为相符。     

泡沫钢的制备及压缩吸能特性

为制备高强轻质泡沫钢吸能材料,本文以430L不锈钢粉为原料、CaCl₂为造孔剂,采用粉末冶金烧结-溶解法制备了孔隙率为64%~80%,孔径1~4 mm的泡沫钢.利用SEM和XRD对试样进行微观组织结构分析,并对试样进行轴向准静态压缩测试,分析讨论了孔隙率和孔形对泡沫钢压缩变形行为和吸能特性的影响,以及变形过程中孔结构变形和坍塌机理.研究表明：泡沫钢孔结构呈近球形且分布均匀,孔之间通过孔壁上的微孔形成有效连通.在压缩变形过程中,变形区首先发生在孔形不规则且孔壁较薄处,后诱发周围孔变形并形成多个变形带.泡沫钢试样压缩屈服平台应力随着孔隙率的增加而减小,当孔隙率为64.81%~78.82%时,其对应的屈服平台应力为59.37~17.04 MPa.在孔隙率相同的条件下,孔形为近球形的泡沫试样,其屈服平台应力远高于孔形不规则的试样.当应变量为40%时,孔隙率为64.81%~78.82%的泡沫钢,其单位体积的能量吸收值为23.92~7.32 MJ/m³,约为泡沫铝的5~7倍.4种不同孔隙率泡沫钢样品的理想吸能效率(I)均达0.85以上,表明泡沫钢可以作为一种理想的吸能材料.     

用于纤维材料表面耐磨涂层的制备与性能表征

为使涤纶织物应用范围更广,更耐磨,本文制备了一种有机硅树脂基纳米硼化钛碳化钛复合涂层,通过正交实验法得到最佳的涂层方案,并尝试将其应用于涤纶织物,以改善涤纶织物的表面结构,进而实现涤纶织物表面优异的耐磨性能.为测试涂层对涤纶织物性能的影响, 采用泰伯式耐磨仪、液滴形状分析仪、电子织物强力机、扫描电子显微镜(SEM)研究了涂层织物的耐磨性能、疏水性能、物理机械性能和磨损织物的表面微观形态.研究表明：当有机硅树脂与无水乙醇质量比为75: 25,含量(质量分数)为93%;超分散剂含量为1.5%;乙醇增稠剂含量为1.5%;纳米硼化钛和碳化钛质量比为2: 1,含量为4%时,所得涂层溶液应用于涤纶织物后会形成一层包覆层,耐磨性能最优.对于涂覆量为15 g/m²的涤纶,拉伸断裂强力由573.92 N提高到620.48 N,顶破强力由652.34 N提高到790.07 N,撕裂强力由9.87 N降低到5.78 N,疏水性能有较大提高,接触角可达到120°以上.     

DOC‐LS,a new liposome for dermal delivery,and its endocytosis by HaCaT and CCC‐ESF‐1 cells

The main objective of this work was to investigate the uptake channels of skin cells through which coumarin 6, transported by deoxycholate‐mediated liposomes (DOC‐LS), was internalised; this was also compared against the action of conventional LS. Coumarin 6‐loaded DOC‐LS and LS were characterised for size distribution, zeta potential, and shape, and analysed in vitro in human epidermal immortal keratinocyte (HaCaT) (epidermal) and human embryonic skin fibroblast (CCC‐ESF‐1) (dermal) cell lines. Various endocytosis inhibitors were incubated with cells treated with the nanocarriers. Flow cytometry results indicated that HaCaT and CCC‐ESF‐1 cells internalise the tested preparations through pinocytotic vesicles, macropinocytosis, clathrin‐mediated endocytic pathways, and via lysosomes, which consume a considerable amount of energy. The endocytosis pathways of DOC‐LS and LS showed no difference. This study provides a basis for the application of LS being combined with a microneedle system for efficient intracellular drug delivery, targeting cutaneous histocyte disorders.Inspec keywords: drugs, nanoparticles, lipid bilayers, nanomedicine, biomedical materials, electrokinetic effects, biomembrane transport, drug delivery systems, skin, organic compoundsOther keywords: dermal delivery, CCC‐ESF‐1 cells, skin cells, deoxycholate‐mediated liposomes, coumarin 6‐loaded DOC‐LS, endocytosis inhibitors, clathrin‐mediated endocytic pathways, endocytosis pathways, HaCaT cell lines, size distribution, zeta potential, nanocarriers, flow cytometry, pinocytotic vesicles, macropinocytosis, microneedle system, efficient intracellular drug delivery, targeting cutaneous histocyte disorders     

Erratum to: High-purity helical carbon nanotubes by trace-waterassisted chemical vapor deposition: Large-scale synthesis and growth mechanism

Nano Research - The first author, Fanbin Meng, and the second author, Ying Wang, contributed equally to this work was unfortunately forgotten to write on the first pages of the main text and the...