NR/SiO_2复合体系结合胶及动态力学性能研究

研究了白炭黑用量和Si69原位改性对NR/SiO2复合体系结合胶含量及其与动态力学性能之间关系的影响。结果表明,随着白炭黑用量的增大,2种复合体系(NR/SiO2/Si69和NR/SiO2)结合胶含量均呈现先增大后减小的趋势。当白炭黑用量达到临界值时,复合体系结合胶含量最大,此时Payne效应开始显现。当白炭黑用量超过临界值时,复合体系结合胶含量减小,形成完善的填料网络结构,出现明显的Payne效应。与NR/SiO2复合体系相比,NR/SiO2/Si69复合体系结合胶含量大大提高,白炭黑用量的临界值也相应提高,Payne效应减弱。     

Strengthening effects of sprayed fiber reinforced polymers on concrete

The objectives of this study were twofold. The first was to investigate the compressive and flexural behaviors of small‐sized concrete specimens strengthened with sprayed fiber reinforced polymer (SFRP), considering various fiber lengths, fiber volumes, and concrete strengths. The second was to evaluate the strengthening effects of SFRP on the flexural behaviors of large‐sized reinforced concrete beams. U‐shaped strips and shear keys were applied to the test specimens to improve the interfacial bond resistance between the concrete surface and SFRP. POLYM. COMPOS., 36:722–730, 2015. © 2014 Society of Plastics Engineers     

Swelling of thermosensitive interpenetrating polymer networks composed of poly(vinyl alcohol) and poly(acrylic acid)

The swelling behavior of interpenetrating polymer networks (IPNs) composed of poly(vinyl alcohol) (PVA) and poly(acrylic acid) (PAA) in water was studied. The PVA/PAA IPN gels were prepared by four synthetic methods. The swelling behaviors of these IPNs made by different methods were compared. The differences in swelling behaviors of samples are discussed on the basis of their structural and physical differences. © 1996 John Wiley & Sons, Inc.     

Plasma surface graft of acrylic acid onto a porous poly(vinylidene fluoride) membrane and its riboflavin permeation

Acrylic acid was grafted onto the surface of commercial poly(vinylidene fluoride) (PVDF) membrane using plasma polymerization techniques. Graft reaction was confirmed by X-ray photoelectron spectroscopy (XPS) spectra and attenuated total reflectance Fourier transform infrared spectra. Grafting rate was dependent on plasma exposure time. For argon plasma at 30 W, grafting rate decreased after maximum rate was observed at 30 s exposure. PVDF membrane with 30 s plasma exposure and subsequently grafted with acrylic acid (AA-3) showed the greatest O_1s/F_1s area ratio in XPS spectra. Thus its graft density and degree of polymerization were the largest among the graft membranes. Permeation of riboflavin through all poly(acrylic acid)-g-PVDF membranes showed a decrease in permeability of riboflavin in pH 4–5. © 1996 John Wiley & Sons, Inc.     

Causal Effects of Aroma Compounds on Royal Gala Apple Flavours

Volatile flavour compounds produced by Royal Gala apple have been identified by GC-MS. Major components were 2-methylbutyl acetate, butyl acetate, hexyl acetate, butanol, 2-methylbutanol and hexanol. Odour-port evaluation of the components separated by GC indicated that the first four compounds were important contributors to the aroma and flavour. Use of analytical sensory panels revealed that 2-methylbutyl acetate, butanol and hexyl acetate had the greatest causal effect on those aroma and flavour attributes considered important for Royal Gala apples.     

太子参化学成分及生物活性研究进展

太子参为石竹科植物孩儿参的干燥块根,味甘、微苦,性平,归脾肺经,具有益气健脾、生津润肺之功效,常用于气虚津伤的肺虚燥咳,被国家卫生健康委员会批准用于保健食品。现代药理和临床研究表明,太子参中特征性化学成分多糖和环肽具有免疫调节、抗炎、改善记忆等作用。近年来对太子参的化学成分、结构和药理作用的综述仅局限于特征成分,对其他成分还鲜有系统梳理报道。因此本文系统梳理了太子参的化学成分及生物活性研究进展,以期为太子参的开发利用提供参考和依据。     

Optimal design of the cure cycle for consolidation of thick composite laminates

Autoclave cure of the prepreg lay-up has been an importance method for fabrication of advanced fiber reinforced composites in the aerospace industry. Quality of the autoclave cured composite is largely affected by the cure cycle. In this study, the genetic algorithm is applied to design a cure cycle for the consolidation of thick laminated composites. The objective of the design is to select a cure cycle that results in a shorter cycle time for the process while avoiding the thermal runaway inside the composites. The results show that the genetic algorithm is a feasible and robust search algorithm to determine the cure cycle for the consolidation process.     

Compressibility and relaxation of fiber reinforcements during composite processing

In many reinforced composite manufacturing processes it is necessary to compact the fiber materials to obtain the desired fiber/resin ratio in the finished part. Detailed knowledge of applied surface force versus material fiber volume is particularly important in processes such as pultrusion, resin transfer molding, and compression molding. The force required to compact a stack of reinforcing material is strongly dependent on the type of fiber used and its material form. Complicated interactions are possible, particularly when mixtures of unidirectional, oriented cloth and random fiber mats are used. This paper will present results of an experimental and analytical investigation of the response of various dry reinforcing materials subjected to compressive forces applied normal to their principle plane. Experiments were conducted by applying up to 8.6 MPa normal force to thick stacks of E-glass, graphite cloth, mat and unidirectional material and combinations of two different fiber orientation. Pressure versus fiber volume data were generated for both individual materials and various combinations. Experimental results were compared to analytical predictions. Data showed that the force versus deformation is very strongly dependent on the details of the fiber form or forms being used. There is structural relaxation during fiber compression. Relaxation is very related to fiber orientation, span length, and fiber breakage during compaction. Relaxation behavior decreases with fiber alignment. Random mats and 0/90 cloth show much more relaxation than unidirectional fibers. Data of relaxation is very well fitted with a Maxwell-Wiechert viscoelastic model.     

数字滤波器不同实现结构下的有限字长效应分析

文中针对导弹武器系统中的数字滤波器,从弹上计算机定点实现的特点出发,说明了不同实现结构下的有限字长效应。以IIR滤波器为例,给出滤波器实现时常用的3种基本结构,然后从弹上计算机定点实现的角度出发,说明选择滤波器结构的一些原则。     

中间轧制冷却工艺(IRQ)在炉卷生产线上的应用

介绍了安钢炉卷轧机生产线开发、应用IRQ控轧工艺替代传统控轧生产工艺的工艺流程及实施效果.