Inside Front Cover: The Elastic Properties and Plastic Behavior of Two‐Dimensional Polymer Structures Fabricated by Laser Interference Lithography (Adv. Funct. Mater. 10/2006)

The probing of the micromechanical properties within a two‐dimensional polymer structure with sixfold symmetry fabricated via interference lithography reveals a nonuniform spatial distribution in the elastic modulus “imprinted” with an interference pattern in work reported by Tsukruk, Thomas, and co‐workers on p. 1324. The image prepared by M. Lemieux and T. Gorishnyy shows how the interference pattern is formed by three laser beams and is transferred to the solid polymer structure. The elastic and plastic properties within a two‐dimensional polymer (SU8) structure with sixfold symmetry fabricated via interference lithography are presented. There is a nonuniform spatial distribution in the elastic modulus, with a higher elastic modulus obtained for nodes (brightest regions in the laser interference pattern) and a lower elastic modulus for beams (darkest regions in the laser interference pattern) of the photopatterned films. We suggest that such a nonuniformity and unusual plastic behavior are related to the variable material properties “imprinted” by the interference pattern.     

A Novel Lattice Reduction Precoding Method

In this work, a novel lattice reduction (LR) precoding method is proposed. The technique combines conventional LR precoding with a method of reducing the singular value coefficients of the LR-reduced basis matrix. The performance of the new technique was comparable to that of sphere encoding, while its complexity was lower than that of other sub-optimal methods.     

Bi-slotted tree based anti-collision protocols for fast tag identification in RFID systems

This paper is intended to present bi-slotted tree based RFID tag anti-collision protocols, bi-slotted query tree algorithm (BSQTA) and bi-slotted collision tracking tree algorithm (BSCTTA). Diminishing prefix overhead and iteration overhead is a significant issue to minimize the anti-collision cost. For fast tag identification, BSQTA and BSCTTA use time divided responses depending on whether the collided bit is `0' or `1' at each tag ID. According to the simulation results, BSQTA and BSCTTA require less time consumption for tag identification than the other tree based RFID tag anti-collision protocols     

Inorganic Drug‐Delivery Nanovehicle Conjugated with Cancer‐Cell‐Specific Ligand

The surface of layered double hydroxide nanoparticles, a potential drug‐delivery nanovehicle, is modified with the cancer‐cell‐specific ligand, folic acid. The surface modification is successfully accomplished through step‐by‐step coupling reactions with aminopropyltriethoxysilane and 1‐ethyl‐3‐(3‐dimethyl aminopropyl)‐carbodiimide. In order to evaluate the cancer‐cell targeting effect of folic‐acid‐grafted layered double hydroxide utilizing fluorescence‐related assay, both layered double hydroxide with and without folic acid moiety are labeled with fluorescein 5′‐isothiocyanate. The uptake of layered double hydroxide and folic acid conjugated into KB and A549 cells is visualized using fluorescence microscopy and measured by flow cytometry. Both chemical and biological assay results demonstrate that the folic acid molecules are indeed conjugated to the surface of layered double hydroxide and thus the selectivity of nanovehicles to cancer cells overexpressing folate receptors increases. In this study, it is suggested that layered double hydroxide nanoparticles can be used as drug‐delivery carriers with a targeting function due to the chemical conjugation with specific ligand.     

Curved Projection Integral Imaging Using an Additional Large‐Aperture Convex Lens for Viewing Angle Improvement

In this paper, we propose a curved projection integral imaging system to improve the horizontal and vertical viewing angles. The proposed system can be easily implemented by additional use of a large‐aperture convex lens in conventional projection integral imaging. To obtain the simultaneous display of 3D images through real and virtual image fields, we propose a computer‐generated pickup method based on ray optics and elemental images, which are synthesized for the proposed system. To show the feasibility of the proposed system, preliminary experiments are carried out. Experimental results indicate that our system improves the viewing angle and displays 3D images simultaneously in real and virtual image fields.     

Compact 2.5 Gb/s Burst‐Mode Receiver with Optimum APD Gain for XG‐PON1 and GPON Applications

This letter presents a compact 2.5 Gb/s burst‐mode receiver using the first reported monolithic amplifier IC developed with 0.25 …m SiGe BiCMOS technology. With optimum avalanche photodiode gain, the receiver module can obtain a fast response, high sensitivity and wide dynamic range, satisfying the overhead timing and various power specifications for a 2.5 Gb/s next‐generation passive optical network (PON), as well as a legacy 1.25 Gb/s PON in the upstream.     

Data retention characteristics of MANOS-type flash memory device with different metal gates at various levels of charge injection

We investigated the impact of charge injection and metal gates (Al and Pt) on the data retention characteristics of metal–alumina–nitride–oxide–silicon (MANOS) devices for NAND flash memory application. Through the theoretical and experimental results, the highly injected charge (ΔV_TH) could cause the band bending of Al₂O₃, which reduced the tunneling distance across Al₂O₃. Thus, the dominant charge loss path is not only toward SiO₂ but also toward Al₂O₃ direction. Compared to low-metal work function (Ф_M), ONA stack with high-Ф_M showed better data retention characteristics, even if ΔV_TH is high. This could be explained by Fermi level alignment for different Ф_M, which results in the reduction of electric field across the Al₂O₃ compensated by the ΔФ_M (Ф_Pt ? Ф_Al).     

High efficiency red phosphorescent organic light-emitting diodes using a spirobenzofluorene type phosphine oxide as a host material

High efficiency red phosphorescent organic light-emitting diodes have been developed using a spirobenzofluorene type phosphine oxide (SPPO2) as a host material. The SPPO2 had a high glass transition temperature of 119 °C and a smooth surface morphology with a surface roughness less than 1 nm. The red device with the SPPO2 as a host showed a quantum efficiency of 14.3% with a current efficiency of 20.4 cd/A.     

16‐QAM‐Based Highly Spectral‐Efficient E‐band Communication System with Bit Rate up to 10 Gbps

This paper presents a novel 16‐quadrature‐amplitude‐modulation (QAM) E‐band communication system. The system can deliver 10 Gbps through eight channels with a bandwidth of 5 GHz (71‐76 GHz/81‐86 GHz). Each channel occupies 390 MHz and delivers 1.25 Gbps using a 16‐QAM. Thus, this system can achieve a bandwidth efficiency of 3.2 bit/s/Hz. To implement the system, a driver amplifier and an RF up‐/down‐conversion mixer are implemented using a 0.1 µm gallium arsenide pseudomorphic high‐electron‐mobility transistor (GaAs pHEMT) process. A single‐IF architecture is chosen for the RF receiver. In the digital modem, 24 square root raised cosine filters and four (255, 239) Reed‐Solomon forward error correction codecs are used in parallel. The modem can compensate for a carrier‐frequency offset of up to 50 ppm and a symbol rate offset of up to 1 ppm. Experiment results show that the system can achieve a bit error rate of 10^?5 at a signal‐to‐noise ratio of about 21.5 dB.     

Two-level protection and guarantee for multimedia traffic in IEEE 802.11e distributed WLANs

In order to support multimedia applications such as voice and video over the wireless medium, a contention-based channel access function, called Enhanced Distributed Channel Access (EDCA), has been developed in the emerging standard IEEE 802.11e. In the EDCA, differentiated channel access is provided for different traffic classes. In this paper, we propose a two-level protection and guarantee mechanism for voice and video traffic in the EDCA-based distributed wireless LANs. In the first-level protection, the existing voice and video flows are protected from the new and other existing voice and video flows via a distributed admission control with tried-and-known and early-protection enhancements. In the second-level protection, the voice and video flows are protected from the best-effort data traffic by adopting frame-based and limit-based data control mechanisms. Performance evaluations are conducted in terms of throughput, delay, transmission limit, number of collisions, and throughput square relative difference. Extensive simulation results demonstrate that the proposed two-level protection and guarantee mechanism is very effective in terms of the protection and guarantee of existing voice and video flows as well as the utilization of the channel capacity. An early version of this paper was presented at IEEE INFOCOM 2004.