Weld defect formation in FSWed coppers

This work was undertaken to explore the formation of weld defects in FSWed copper metals via both numerical and experimental approaches. The 4 mm-thick copper sheets were friction stir welded at a tool rotational speed of 710 rpm and tool translational speed of 40 mm/min. Microstructural evaluations were performed on the welded specimens. Also a 3D arbitrary Lagrangian Eulerian numerical model was developed to obtain temperature and material velocity profiles. To this aim, DEFORM-3D was implemented for developing the numerical simulation. Numerical results for temperature values showed good agreement with the recorded experimental data. They also suggest that on the advancing side (AS) of the trailing side, the pin velocity has the minimum amount (zero), and this is the main reason for the formation of tunneling cavity. Experimental results show that a force is created between the reminder of material at the joint and the rim of AS. This force causes a prong of surface material from the AS rim to penetrate into lower parts of weld. It seems that the inadequate pressure (low values of the plunge depth), inadequate surface materials, and the trapped air are the main causes for the formation of the weld defects.     

Performance of advanced color difference and CAM02‐based formulas in prediction of the Crispening effect for reflective samples

The Crispening effect is defined as an increase in the perceived color difference of the two stimuli, when their color (chromaticity or luminance) is close to the background on which the two stimuli are compared. In this study, the amount of the Crispening effect for three achromatic backgrounds and also the performance of six different color difference formulas (CDFs) for prediction of this effect have been investigated, by preparing 85 sample pairs in 9 CIE's recommended color centers. Regarding the results, the maximum (50%) and the minimum (4%) amount of the Crispening effect belong to the gray and the purple centers, respectively. According to the results of a comparative test, the Crispening intensifies when two stimuli have just lightness difference instead of just chromaticity difference. The highest variation was for the gray samples, in which the amount of the Crispening effect increased from 35% to 65%. By using PF/3 and STRESS index, it is also concluded that CMC and CIEDE2000 perform better than CAM02‐SCD and CAM02‐UCS in prediction of the Crispening effect on the dark gray and gray backgrounds. According to the results, the significant differences between the performances of the CDFs disappear when the luminance of the background increases. Huang's power functions also do not improve these results significantly. Furthermore, the results indicate that the traditional L* equation used in CIELAB performs similar to the Whittle's formula in prediction of the Crispening effect for reflective samples, and no significant difference was obtained.     

Multiscale modeling of elastic properties of cortical bone

We model cortical bone as a composite material with hierarchical structure. At a nanostructural level, bone is composed of cross-linked collagen molecules, containing water and non-collagenous proteins in their gaps, reinforced with hydroxyapatite-like nanocrystals. Such a nanocomposite structure represents a mineralized collagen fibril, which serves as a primary building block of bone. At a sub-microstructural level (few microns), the mineralized collagen fibrils are embedded in an extrafibrillar hydroxyapatite matrix to form a single lamella, which also contains the lacunar cavities. At a microstructural level (hundreds of microns) one can distinguish two lamellar structures in the mature cortical bone: osteons, made of concentric layers of lamellae surrounding long hollow Haversian canals, and interstitial lamellae made of remnants of old osteons. At a mesostructural level (several millimeters), the cortical bone is represented by a random collection of osteons and resorption cavities in the interstitial lamellae. A macrostructural level is the whole bone level containing both the cortical (compact) and trabecular (spongy) bone types. In this paper, we predict analytically the effective elastic constants of cortical bone by modeling its elastic response at these different scales, spanning from the nanostructural to mesostructural levels, using micromechanics methods and composite materials laminate theories. The results obtained at a lower scale serve as inputs for the modeling at a higher scale. The predictions are in good agreement with the experimental data reported in literature.     

Designing and planning a multi-echelon multi-period multi-product closed-loop supply chain utilizing genetic algorithm

Designing and planning a closed-loop supply chain in a comprehensive structure is vital for its applicability. To cope with the design and planning issue of a comprehensive closed-loop supply chain network, this paper develops an extended model, which is multi-echelon, multi-product, and multi-period in a mixed integer linear programming framework. The word “comprehensive,” in our mathematical approach, in designing and planning a closed-loop supply chain problem, can be analyzed from two complementary angles: including all possible entities (facilities) of a real condition and considering minimum limitations on possible flows between entities. In our proposed model, customers can be supplied via manufacturers, warehouses, and distributors, as an example. The proposed model is solved by CPLEX optimization software and by a developed genetic algorithm. During this computational analysis, we compare results of proposed pretuned genetic algorithm with a global optimum of CPLEX solver. Then, a sufficient number of large-size instances are generated and solved by the proposed genetic algorithm. To the best of our knowledge, there has been no similar multi-period multi-product closed-loop supply chain design and planning problem utilizing any kind of meta-heuristics let alone genetic algorithms. Therefore, in this issue, it is an original research, and results prove the acceptable performances of the developed genetic algorithm.     

Hybrid cascode compensation with feedforward stage for high-speed area-efficient three-stage CMOS amplifiers

Hybrid cascode feedforward compensation (HCFC) is proposed for low-power area-efficient three stage amplifiers driving large capacitive loads. With no overhead in power or area, the total compensation capacitor is divided and shared between two internal high-speed loops instead of solely one loop as is common in prior art. Detailed analysis of HCFC shows significant improvement in terms of stability and bandwidth. This is verified for a 1.2-V amplifier driving a 500-pF capacitive load in 90-nm CMOS technology, where HCFC reduces the total capacitor size and improves the gain-bandwidth by at least 30 and 40 %, respectively, compared to the prevailing schemes.     

Design of a neuro-fuzzy–regression expert system to estimate cost in a flexible jobshop automated manufacturing system

We propose a cost estimation model based on a fuzzy rule backpropagation network, configuring the rules to estimate the cost under uncertainty. A multiple linear regression analysis is applied to analyze the rules and identify the effective rules for cost estimation. Then, using a dynamic programming approach, we determine the optimal path of the manufacturing network. Finally, an application of this model is illustrated through a numerical example showing the effectiveness of the proposed model for solving the cost estimation problem under uncertainty.     

Mathematical programming approach to optimize material flow in an AGV-based flexible jobshop manufacturing system with performance analysis

An automated manufacturing system (AMS) is a complex network of processing, inspecting, and buffering nodes connected by system of transportation mechanisms. For an AMS, it is desirable to be capable to increase or decrease the output with the rise and fall of demand. Such specifications show the complexity of decision making in the field of AMSs and the need for concise and accurate modeling methods. Therefore, in this paper, a flexible jobshop automated manufacturing system is proposed to optimize the material flow. The flexibility is on the multi-shops of the same type and also multiple products that can be produced. An automated guided vehicle is applied for material handling. The objective is to optimize the material flow regarding the demand fluctuations and machine specifications. An illustrative example is presented to test the validity of the proposed mathematical model.     

Recent Approaches in the Development of Encapsulated Delivery Systems for Probiotics

The concept of probiotics has been well-known for more than a century. The availability and survival of the consumed probiotics in the colon has not been proved convincingly and needs further studies and clarification. It was not known whether the fastidious probiotics could reach the targeted site of action due to gastrointestinal stress. However, probiotics must sustain themselves in high number, survive during passage through the stomach to the intestine, and react symbiotically with the host when they reach the colon. This review consolidates some of the recent findings and new strategies on the development of a delivery system for targeted colonic delivery of probiotics.     

Effects of Acidity and Method of Preparation on Nucleate Pool Boiling of Nanofluids

Past research has shown contradicting trends in the rate of heat transfer during pool boiling of nanofluids, which could be attributed either to their stability or to their method of preparation or to both. An experimental study has been conducted to investigate the effects of electrostatic stabilization and preparation method of nanofluids on their pool boiling rate of heat transfer. Nanofluids made from water and alumina nanoparticles at 0.1 vol% concentration were used. The effect of electrostatic stabilization was investigated by changing the pH value from 6.5, neutral, to 5, acidic. The effect of preparation method has been investigated by using nanofluids prepared from dry particles and from ready-made suspensions. Compared with water, all nanofluids investigated resulted in deterioration in the rate of heat transfer during pool boiling. Neutral nanofluids made from ready-made suspensions and from dry particles resulted into almost the same deterioration in the rate of heat transfer of 49% and 45%, respectively, with respect to that of pure water. The most significant effect of electrostatic stabilization was found in the case of acidic nanofluids made from dry particles, which resulted in deterioration in the rate of heat transfer of 31%. However, acidic nanofluids made from ready-made suspensions resulted in a deterioration of 46%, which is almost the same as that of suspension-made and dry particles-made nanofluids. These results indicate that electrostatic stabilization using acid addition is most effective with nanofluids made from dry particles.     

Metaheuristics for fuzzy dynamic facility layout problem with unequal area constraints and closeness ratings

Dynamic facility layout problem deals with the problem of arranging and rearranging the layout plan of a system throughout several periods. In each period, the material handling costs are different from the past period due to the change in the market demand and product mix. In this paper, the uncertainty that exists in transportation values’ forecast is modeled by fuzzy theory. In this paper, departments have unequal areas. This means that in each period, departments can be placed only in certain places due to different spacing requirements. In addition, closeness rating matrix is considered in order to model the goodness of different layout plans with regard to qualitative factors according to decision maker. Accordingly, fuzzy dynamic facility layout problem with unequal areas and closeness rating matrix is considered that aims to minimize the uncertain material handling costs as well as the shifting costs, and maximize closeness rating with regard to space requirements of unequal area departments. A number of fuzzy algorithms are developed in order to deal with the problem. A number of ranking criteria from the literature are implemented in order to compare the performance of the developed algorithms.