Blends of nylon 6 with an ethylene-based multifunctional polymer. I. Rheology–structure relationships

An experimental study was conducted to investigate the rheological behavior of a heterogeneous polymer blend system consisting of nylon 6 and an ethylene-based multifunctional polymer (CXA 3101, DuPont Co.). For comparison purposes, we also investigated the rheological behavior of two additional blend systems, namely blends of nylon 6 with a chemically modified polyolefin (Plexar 3, Chemplex Co.) and blends of nylon 6 with ethylene–vinyl acetate copolymer (EVA). We have investigated the thermal and thermomechanical behavior of the blend systems, using differential scanning calorimetry (DSC) and dynamic mechanical analysis (DMA). Also, we have attempted to identify the chemical structure of the functional groups present in the CXA 3101 and Plexar 3 resins, using infrared (IR) spectroscopy. This information has enabled us to interpret the observed rheological behavior. Furthermore, we have used both optical and scanning electron microscopies to investigate the state of dispersion of the constituent components in each of the blend systems. We have concluded that, during melt blending, chemical reactions have taken place between carboxyl or anhydride groups present in the CXA 3101 resin and the amino end groups of the nylon 6, forming a graft copolymer which then acted as an “interfacial agent.”     

Reduction of optical beat interference using gain-saturated RSOA in upstream WDM/SCM optical links

A new scheme for reducing optical beat interference (OBI) noise in optical network units is proposed for subcarrier multiplexing-based access network applications. The optical spectrum of the transmit lasers is broadened by using a radio frequency (RF) clipping tone with a modulation depth greater than one. This reduces the impact of the OBI noise. The distortions caused by an RF clipping tone are also suppressed by introducing a gain-saturated reflective optical amplifier, which shows the characteristics of high-pass filter. The proposed scheme has been verified by measuring the error vector magnitude of 16QAM signal with 20 Mbps. Error-free transmission has been achieved even when the light of OBI-noise-causing lasers is stronger than that of the signal laser by 7 dB     

齿轮键槽拉削胎具

我公司生产的150C刮板机斜齿轮和40t刮板机斜齿轮、正齿轮双键槽(如图1),一直采用插床加工,生产效率低,满足不了产品的生产需要。为此,我们改用拉床拉削键槽,设计制作了如图2所示的键槽拉胎。     

Wavelength and repetition rate tunable optical pulse source using a chirped fiber Bragg grating and a nonlinear optical loop mirror

We experimentally demonstrate a simple and novel scheme for tunable real-repetition-rate multiplication, based on the combined use of fractional Talbot effect in a linearly tunable chirped fiber Bragg grating (FBG) and cross-phase modulation (XPM) effect in a nonlinear optical loop mirror (NOLM). By tuning the group-velocity dispersion of the chirped FBG fabricated with the S-bending method using a uniform FBG, we obtain high quality pulses at pseudorepetition rates of 20/spl sim/50 GHz from an original 8.5-ps 10-GHz soliton pulse train. We subsequently convert this pseudorate multiplication into a real-rate multiplication using XPM effect in an NOLM. A wavelength tuning is also achieved over a /spl sim/15-nm range.     

Cu—Zn—Al系合金热弹性马氏体相变的热滞

本文通过热处理工艺及添加第四组元研究了Cu－Zn－Al系记忆合金的相变热滞。结果表明，淬火冷却速度影响合金的相变热滞大小，随着母相时效时间的延长，马氏体相变热滞变大．Mn元素的加入可以减小CU－Zn－Al合金相变热滞．     

Maternal age and congenital cytomegalovirus infection: screening of two diverse newborn populations, 1980-1990

Cytomegalovirus (CMV) is the leading cause of congenital viral infection in the United States. To prevent damaging congenital CMV infections, it is necessary to have accurate population estimates of prevalence and to identify maternal factors associated with an elevated risk of congenital infection in the newborn. From 1980 through 1990, 17,163 offspring of predominantly low-income nonwhite women who delivered at a public hospital and 9892 newborns of predominantly mid- to upper-income white women who delivered at a private hospital were screened for congenital CMV infection. Women < 20 years old (adjusted prevalence odds ratio [POR], 4.8; 95% confidence interval [CI], 2.6-8.9) at the public hospital and all nonwhite women (adjusted POR, 1.6; 95% CI, 1.1-2.2) had an increased risk of delivering an infected newborn. Newborns of adolescent women in both populations had the highest prevalence of clinically apparent infection. Offspring of nonwhite low-income adolescents are at greatest risk for congenital CMV infection and more damaging sequelae.     

失水山梨醇倍半油酸酯的合成

考察了合成乳化剂失水山梨醇倍半油酸酯（ＡｒｌａｃｅｌＣ）的原料配比、反应温度、反应时间、催化剂用量对产品性能的影响，并找到了最佳反应条件．     

屏蔽暂堵反排解堵效率的实验分析

在一定实验条件下，屏蔽暂堵的反排解堵效率随压差、温度的增大而增大，反排解堵在很短的时间内就可完成。一般的反排解堵率都在60％以上，但反徘不能完全解堵。     

Predicting compliance with annual follow-up evaluations in persons with spinal cord injury

In this study a representative sample of German acute care hospitals is used to describe the effects of dementia within acute care hospitals. Data from hospital patients above age 60 with the diagnosis dementia (ICD 290, 293, 294 and 310), collected over an observation period of 12 years, are compared with nondemented hospital patients at the same ages. The differences in the average length of stay between demented and nondemented patients are only relatively small in German acute care hospitals. The degree of multimorbidity is higher and hospital infections are more frequent for demented patients. The main differences occur with mortality: demented inpatients of both sexes experience a hospital mortality which is about twice as high as for nondemented patients at the same ages.     

Complete nucleotide sequence of HTLV-II isolate NRA: comparison of envelope sequence variation of HTLV-II isolates from U.S. blood donors and U.S. and Italian i.v. drug users

Seven cardiac electrophysiology stimulators from four manufacturers (Biotronik, Bloom, Digitimer and Medtronic) in common current use are reviewed. The stimulators differ in the features provided and the design adopted to achieve these features. The number of output channels ranges from one to four, the number of extra-stimuli available ranges from two to six, and these can be delivered as a variety of sequences. Some of the stimulators (Digitimer and Bloom) are modular while others (Biotronik and Medtronic 532 series) are of an integrated design comprising a single physical unit. The design of the Medtronic EP-2 has both integrated and modular characteristics. The features of the stimulators associated with input, output, control and the user interface are specifically reviewed. The features are also compared against the published recommendations of the American Heart Association. In addition, a summary of stimulator user comments from a number of electrophysiology centres is presented. All of the stimulators fulfil, or are close to fulfilling, basic electrophysiological requirements, but some provide more complex facilities such as would be required by specialist centres.