彩钢岩棉夹芯屋面板、墙面板节点性能研究

为了掌握彩钢岩棉夹芯屋面板、墙面板与檩条的螺钉连接节点抗拉破坏机理,采用理论分析、试验验证及有限元模拟相结合的方法研究了不同钢板厚度及芯材厚度时节点破坏情况.分析结果表明:屋面板节点连接破坏是由于钢板局部屈曲引起的,墙面板则是钢板被冲剪破坏造成的,同时,结合对有限元模拟结果的回归,提出了节点承载力设计公式,可为以后节点设计提供参考.增加岩棉刚度及其与侧向钢板的粘结,或增加钢板厚度对提高屋面板节点极限承载力起着重要作用.     

电子屏幕智能防近视系统

当下,电子屏幕的使用越来越广泛,电子屏幕在带给我们便捷生活的同时,也带来了一个很大的问题——损害视力.该研究针对此现象设计了一套系统,旨在帮助人们在使用电子屏幕时能够时刻注意与屏幕之间的距离,从而达到保护眼睛的目的.系统采用STM32单片机作为控制模块,在电子屏幕的正上方安装了一个人体红外传感器与一个超声波测距传感器,以达到检测人体与实时测距的功能.系统配备有LED灯与YS-M3语音模块,作为主要的报警模块,能够有效实现实时报警提醒的功能,对于保护视力起了很大作用.     

Degradability and biocompatibility of bioglass/poly(amino acid) composites with different surface bioactivity as bone repair materials

Bioglass (BG) possesses excellent bioactivity and has been widely used in the manufacture of biomaterials. In this study, a composite with different surface bioactivity was fabricated via in situ melting polymerization by incorporating BG and poly(amino acid) (PAA) at a suitable ratio. The structure of the composite was characterized by Fourier transform infrared spectroscopy and XRD. The compressive strength of the BG/PAA composites was 139 MPa (BG:PAA = 30:70). The BG/PAA composites were degradable, and higher BG in composite showed higher weight loss after 4 weeks of incubation in simulated body fluid. In addition, the BG/PAA composite maintained adequate residual compressive strength during the degradation period. The SEM results showed the differences in surface bioactivities of the composites directly, and 30BG/PAA composite showed thicker apatite layer and higher Ca/p than 15BG/PAA. in vitro MG-63 cell culture experiments showed that the composite was noncytotoxic and thus allows cells to adhere, proliferate, and differentiate. This indicates that the composite has good biocompatibility. The implantations in the bone defects of rabbits for 4 and 12 weeks were studied. The composites had good biocompatibility and were capable of guiding new bone formation without causing any inflammation. The composite may be successfully used in the development of bone implants.     

EL-CID电磁铁心故障检测试验的应用研究

为了检验发电机定子铁心质量,在制造过程中和安装现场,对发电机定子铁心进行试验是必不可少的.目前国内针对定子铁心更多地是采用常规试验方法,但是常规铁损试验所需的设备容量大、试验线路复杂,而且经济性较差、效率低下.而采用电磁定子铁芯故障探测仪(EL-CID)铁心试验只需提供约4％的额定磁通量,即可完成对铁心故障的诊断,其所需的励磁电源容量较小且容易配备和携带.为了更好地利用EL-CID检测方式进行铁心质量的判定,本文通过模拟多种故障状况下的试验,论证了EL-CID的使用条件和影响因素,为实际工作中EL-CID的应用提供更好的参考依据.     

建立健全我国工业控制系统信息安全体系

通过分析我国工业控制系统信息安全现状,提出应从健全我国工控系统信息安全标准、发展自主可控检测认证工具集、推进工业控制系统信息安全培训、提供工业控制系统信息安全服务这几个方面入手,建立健全我国工业控制系统信息安全体系,进一步提升我国工控领域信息安全防护水平,以确保关系国家关键基础设施的工控产业安全健康发展。     

Experimental study of stable surfaces for anti-slug control in multi-phase flow

Severe slugging flow is always challenging in oil & gas production, especially for the current offshore based production. The slugging flow can cause a lot of problems, such as those relevant to production safety, fatigue as well as capability. As one typical phenomenon in multi-phase flow dynamics, the slug can be avoided or eliminated by proper facility design or control of operational conditions. Based on a testing facility which can emulate a pipeline-riser or a gas-lifted production well in a scaled-down manner, this paper experimentally studies the correlations of key operational parameters with severe slugging flows. These correlations are reflected through an obtained stable surface in the parameter space, which is a natural extension of the bifurcation plot. The maximal production opportunity without compromising the stability is also studied. Relevant studies have already showed that the capability, performance and efficiency of anti-slug control can be dramatically improved if these stable surfaces can be experimentally determined beforehand. The paper concludes that obtaining the stable surface on the new developed map can significantly improve the production rate in a control scheme. Even though the production rate can be further improved by moving the stable surface using advanced control strategies, the constant inputs can in some cases be preferable due to the easier implementation.