Process for dense 2D SiC fiber-SiC matrix composites

A new process using SiC fiber fabrics and SiC tapes to produce dense 2D SiC fiber-SiC (SiC/SiC) composites is demonstrated. The strategy for fabricating the SiC/SiC composites involves: (i) alternately stacking the SiC fiber fabrics and SiC tapes at room temperature, (ii) pyrolyzing of the stacked composites, and (iii) hot-pressing the pyrolyzed composites. By controlling the hot-pressing temperature, it is possible to obtain dense 2D SiC/SiC composites with relative densities of >98%. The 2D SiC/SiC composites show no degradation of the SiC fibers and a higher mechanical strength.     

The form error prediction in side wall machining considering tool deflection

In this research, an effective method for the form error prediction in side wall machining with a flat end mill is suggested. The form error is predicted directly from the tool deflection without surface generation by cutting edge locus with time simulation. The developed model can predict the surface form error accurately about 300 times faster than the previous method. Cutting forces and tool deflection are calculated considering tool geometry, tool setting error and machine tool stiffness. The characteristics and the difference of generated surface shape in up milling and down milling are discussed. The usefulness of the presented method is verified from a set of experiments under various cutting conditions generally used in die and mold manufacturing. This study contributes to real time surface shape estimation and cutting process planning for the improvement of form accuracy.     

A timing controller embedded driver IC with 3.24‐Gbps eDP interface for chip‐on‐glass TFT‐LCD applications

This paper presents a timing controller embedded driver (TED) IC with 3.24‐Gbps embedded display port (eDP), which is implemented using a 45‐nm high‐voltage CMOS process for the chip‐on‐glass (COG) TFT‐LCD applications. The proposed TED‐IC employs the input offset calibration scheme, the zero‐adjustable equalizer, and the phase locked loop‐based bang‐bang clock and data recovery to enhance the maximum data rate. Also, the proposed TED‐IC provides efficient power management by supporting advanced link power management feature of eDP standard v1.4. Additionally, the smart charge sharing is proposed to reduce the dynamic power consumption of output buffers. Measured result demonstrates the maximum data rate of 3.24 Gbps from a 1.1 V supply voltage with a 7.9‐inch QXGA 60‐Hz COG‐LCD prototype panel and 44% power saving from the display system.     

DCT statistics-based digital dropout detection in degraded archived media

With the rapid development of visual digital media, the demand for better quality of service has increased the pressure on broadcasters to automate their error detection and restoration activities for preserving their archives. Digital dropout is one of the defects that affect archived visual materials and tends to occur in block by block basis (size of 8 × 8). It is well established that human visual system (HVS) is highly adapted to the statistics of its visual natural environment. Consequently, in this paper, we have formulated digital dropout detection as a classification problem which predicts block label based on statistical features. These statistical features are indicative of perceptual quality relevant to human visual perception, and allow pristine images to be distinguished from distorted ones. Here, the idea is to extract discriminant block statistical features based on discrete cosine transform (DCT) coefficients and determine an optimal neighborhood sampling strategy to enhance the discrimination ability of block representation. Since this spatial frame based approach is free from any motion computation dependency, it works perfectly in the presence of fast moving objects. Experiments are performed on video archives to evaluate the efficacy of the proposed technique.     

Repeatedly foldable AMOLED display

In this study, a 5.9‐inch foldable active‐matrix organic light emitting diode (AMOLED) display was developed. A folding test was performed repeatedly. The display survived the folding test (100,000 folds) with a curvature radius of 2 mm. To protect an organic light emitting diode (OLED) against moisture, inorganic passivation layers are provided on the upper and lower sides of the flexible display. Using our transfer technology, high density passivation layers can be obtained. The measured water vapor transmission rate of the layer is 7 × 10^?6 g/m²?day or less, which improves OLED reliability. With these techniques, we have developed a book‐type display, which is repeatedly foldable like a book, and a tri‐fold display including a display area, which is foldable in three.     

Development of a robot assisted carotid blood flow measurement system

The ultrasound diagnosis of the carotid artery is one of the most common non-invasive methods to detect early stage heart and cerebrovascular diseases. However, the precision and repetitiveness of the probe positioning depend exclusively on the operator's skills and dexterity. For this purpose, we propose the development of a robot assisted system to enhance the accuracy and repetitiveness of the probe positioning to measure the wave intensity (WI) index. In this paper, the Waseda-Tokyo Women's Medical-Aloka Blood Flow Measurement Robot System No. 2 Refined (WTA-2R) is presented. The WTA-2R consists of a conventional ultrasound diagnosis system, a 6-DOFs parallel link slave manipulator, a 6-DOFs serial link passive arm, and a master device. Experiments were carried out to verify its effectiveness in terms of accuracy and required time to perform the task. From the experimental results, the positioning accuracy and reduction of required time were confirmed.     

A case of Leukonychia with scanning electron microscope observation

Leukonychia is a medical term for white discoloration appearing on nails. The pathophysiologic mechanisms that cause white discoloration are not entirely clear. We processed a case of leukonychia with scanning electron microscope observation and found many crispy, obviously dissociated "layers" in the lower part of the white nail plate. The dissociated "layers" were composed of thick, loose, coarse keratin bundles intertwined with each other. We believe the dissociated "layers" are related to the clinically noted white discoloration appearing on the nails.     

ESPAR array design for the UHF RFID wireless sensor communication system

In this paper, in order to improve the received signal strength (RSS) and signal quality, three arrays of electronically steerable parasitic array radiator (ESPAR) antennas are suggested for the ultra-high frequency (UHF) radio frequency identification (RFID) communication and sensing system applications. Instead of the single antenna, the array antennas have recently been widely used in many communication systems because of their peak gains, better radiation patterns, and higher radiation efficiency. Also, there are some important issues to use the antenna array like high data rates in wireless communication systems and to better understand the many targets or sensors. In this article, a wireless sensor network (WSN) is being investigated to overcome multipath fading and interference by antenna nulling technology that can be achieved through beam control ESPAR array antennas. The proposed ESPAR array antennas exhibit higher gains like 9.63, 10.2, and 12 dBi and proper radiation patterns from one array to another. Moreover, we investigate the mutual coupling effect on the performance of array antennas with different spacing (0.5λ, 0.75λ, λ) and configurations. It is found that the worst mutual coupling reduced by −28 to −34 dB for 2 × 2 array, −3 to −43 dB for 2 × 3 array, and finally −42 dB to −51 dB due to the antenna spacing from 0.5λ to λ. Thus, these suggested antennas could effectively be applied in the WSN communication systems, internet of things (IoT) networks, and massive wireless and backscatter communication systems.     

Photonic Crystal Palette of Binary Block Copolymer Blends for Full Visible Structural Color Encryption

Structural color (SC) arising from a periodically ordered self-assembled block copolymer (BCP) photonic crystal (PC) is useful for reflective-mode sensing displays owing to its capability of stimuli-responsive structure alteration. However, a set of PC inks, each providing a precisely addressable SC in the full visible range, has rarely been demonstrated. Here, a strategy for developing BCP PC inks with tunable structures is presented. This involves solution-blending of two lamellar-forming BCPs with different molecular weights. By controlling the mixing ratio of the two BCPs, a thin 1D BCP PC film is developed with alternating in-plane lamellae whose periodicity varies linearly from ≈46 to ≈91 nm. Subsequent preferential swelling of one-type lamellae with either solvent or non-volatile ionic liquid causes the photonic band gap of the films to red-shift, giving rise to full-visible-range SC correlated with the pristine nanostructures of the blended films in both liquid and solid states. The BCP PC palette of solution-blended binary solutions is conveniently employed in various coating processes, allowing facile development of BCP SC on the targeted surface. Furthermore, full-color SC paintings are realized with their transparent PC inks, facilitating low-power pattern encryption.