LogGAN: a Log-level Generative Adversarial Network for Anomaly Detection using Permutation Event Modeling

Information Systems Frontiers - System logs that trace system states and record valuable events comprise a significant component of any computer system in our daily life. Each log contains...     

高分2号图像业务化大气校正查找表的设计与实现

为实现高分2号图像(GF2)业务化大气校正,利用矢量6S模型(6SV)将辐射传输散射与吸收进行分离计算,其中散射部分采用涵盖各种大气模式、气溶胶类型、成像几何等条件下的大气校正查找表(look-up tables,LUTs)表示,大气吸收部分采用6SV拟合计算的6种大气模式下大气透过率的经验公式表示,这种处理有效简化了查找表大小.在内存4 GB、主频3.10 GHz条件下,通过比较基于本查找表方法和基于FLAASH大气校正软件对北京地区一景GF2数据处理.结果表明:以6SV模型直接大气校正法结果作为真值,两者的绝对误差分别为0.8%和2.6%,处理时间分别为77 s和240 s,该大气校正查找表在处理精度和效率更加适合业务化大气校正.     

Analytical investigation on thermal-induced warpage behavior of ultrathin chip-on-flex (UTCOF) assembly

The serious warpage issues of ultrathin chip-on-flex (UTCOF) assembly induced by mismatched thermal stresses have greatly affected the mechanical stability and reliability of emerging ultrathin chip packaging technology. Currently, a theoretical prediction as a convenient and straightforward approach is still lacked for describing effectively the thermal-mechanical behavior of UTCOF during the adhesive curing and cooling process. In consideration of the adhesive thickness approximating to ultrathin chip and flexible substrate thickness, we develop a layerwise-model of ultrathin chip-adhesive-flex structure under plain strain condition, where the behavior of thick adhesive bonding can be described precisely through increasing the subdivided mathematical plies. Further, the analytical results show that the concave and convex forms of ultrathin chip warpage yield at the end of the curing and cooling process respectively. Meanwhile, the effects of its structure dimensions and material properties are also revealed for discussing a way to relieve the extent of ultrathin chip warpage. Additionally, in order to verify the validity of the theoretical prediction, we also introduce the corresponding numerical technique and experimental method. These results suggest that a kind of rigid and ultrathin flexible substrate such as metal foil should be adopted for small warpage of ultrathin assembly.     

液压系统进、旁油路联合调速回路分析

在定量液压泵供油的系统中给出进、旁油路联合调速的回路,通过对2种进、旁油路联合调速的定量分析,推导出理论计算依据,得出这2种进、旁油路联合调速的调速特点。     

Phase diagrams and thermodynamics of the systems ZrO2-CaO and ZrO2-MgO

The partial phase diagrams of the systems ZrO₂-CaO and ZrO₂-MgO were determined using precision lattice parameter measurements in order to check uncertainties reported in the literature. The results are in general agreement with the previous investigations by Hellmann and Stubican [83HeI], Grain [67Gra], and Sim and Stubican [87Sim]. Enthalpies of formation of the fluorite cubic solid solution and the Ca₂6Zr₁₉O₄₄ ordered phase, with reference to the monoclinic zirconia and the periclase forms of CaO and MgO, were measured calorimetrically. Assessment of the thermodynamic properties of these two systems shows that it is appropriate to model the systems with a simple single cation sublattice model. The eutectoid of the cubic phase in ZrO₂-CaO, according to both the optimization and the experimental results, is located at 1412 ± 50 K and 16.2 ±1.0 mol% CaO and in the ZrO₂-MgO binary at 1678 ± 5 K and 13.1 ± 0.5 mol% MgO. The calculated phase diagrams are presented for comparison with the experimental results.     

Oxidation behavior and mechanism of aluminum oxynitride (AlON) at elevated temperatures

The oxidation behavior and mechanism of aluminum oxynitride (AlON) powder exposed to air at elevated temperatures between 800°C and 1300°C was investigated by X-ray diffractometry (XRD), scanning electron microscope (SEM), electron spin resonance (ESR), nuclear magnetic resonance (NMR), and simultaneous thermogravimetry, differential thermal analysis, and mass spectrometry techniques (TG-DTA-MS). The weight of AlON gradually increases to a maximum value at 1150°C and then decreases with further heating. Meanwhile, AlON powder undergoes chemical changes, as evidenced by lattice expansion, and turns eventually into alumina. ESR spectra reveal the occurrence of lone pair electrons in the oxidized products and the intensity of corresponding resonance signal increases before disappearing with the increase in temperature. Combined with the results of NMR and TG-DTA-MS, the measured data suggest that Al-N in [AlO₃N] tetrahedron and [AlO₅N] octahedron are gradually oxidized into Al-O-N group with lone pair electrons, which causes continuous weight gain and lattice expansion. Further oxidation at higher temperatures results in alumina and N₂.     

中国的稀有金属

本文简要介绍了中国稀有金属在研究、生产方面的发展概况。     

中厚板轧机工作辊失效分析及对策

介绍了济钢中厚板厂使用国外高镍铬和高铬工作辊的主要失效形式 ,并对该工作辊的断裂和裂纹产生原因进行了分析 ,同时针对所存在的问题提出了对策和具体改进措施。     

铜金粉的颜色及其影响因素

利用分光光度计对国内外铜金粉的颜色进行了测试，研究了铜金粉的成分、微观状态对颜色的影响。结果表明：铜金粉颜色可以用色彩三要素进行描述，其中铜金粉的色相只与合金成分有关，而与铜金粉片的大小、形状及粒度分布无关；明度和纯度与铜金粉片在油墨层中定向排列状态、片的大小、形状及粒度分布有关，而与成分无关；合金成分的微小波动不会引起铜金粉色相的明显改变。     

基于Excel VBA的职称评审专家抽取系统的设计与实现

通过对职称评定过程中专家抽取流程和原则的分析,针对人工抽取的弊端,使用Excel及VBA设计实现了一个操作简单、维护方便的专家抽取系统。实践证明该系统运行可靠性强,有效提高了工作效率,真正实现了专家抽取的公开、公正和公平性。