小剂量辐照小鼠胸腺细胞膜流动性的变化

报道了以茈为荧光探针,探讨小剂量~(60)Co γ射线照射后小鼠胸腺细胞膜流动性的变化。结果表明,剂量在0.25-1.00Gy范围,胸腺细胞膜流动性降低与剂量之间呈明显线性关系。从0.50Gy起,辐照组荧光强度比值I_1/I_2与I_3/I_2与对照组的比较存有显著差异(P<0.05)。提示淋巴细胞膜流动性的变化可作为小剂量辐照早期效应的敏感指标。     

纳米羟基磷灰石的合成及分散性能研究

采用中和反应制备羟基磷灰石（HA），在反应过程中添加了六偏磷酸钠、三聚磷酸钠和“快易”作分散剂。采用X射线衍射仪（XRD）、扫描电镜（SEM）、透镜电镜（TEM）、热重和差示扫描分析（TG-DSC）等测试手段对所合成的粉末进行了表征。结果表明：分散剂添加的时间对合成粉末的粒径没有明显的影响；三种分散剂中六偏磷酸钠和三聚磷酸钠的均有较好的分散效果，粉末粒径达到纳米级。     

不锈钢上激光熔敷涂层结构特征与质量研究

采用5kW连续CO2激光器对经等离子喷涂的NiCoCrAlY结合层和ZrO2陶瓷层进行二次重熔处理，并利用金相显微镜、扫描电镜、电子探针和显微硬度计对激光熔敷涂层进行了显微结构、元素分布以及显微硬度观察与测试，结果表明：多道搭接工艺能降低熔敷涂层气孔率，ZrO2陶瓷层稀释度低，与基体结合完好，并观察到NiCoCrAlY合金层中存在明显的对流图案，加入了TiO2-Al-Ti添加剂的ZrO2陶瓷层激光重熔后得到了无裂纹的定向生长柱状晶，并且呈现一次枝晶平均间距为2．3μm的表层和平均间距为3．8μm的次表层结构。     

底部框剪砌体房屋空间弹塑性地震反应分析

本文提出了底部框剪砌体房屋这类上下混合承重结构体系的空间弹塑性地震反应时程分析方法。针对砌体结构和框架抗震墙结构截然不同的抗震性能，对上部砌体结构采用空间剪扭分析法，而对下部框架抗震墙结构采用空间协同分析法，建立了组合型串联刚片系振动模型。对单向和双向地震波输入结构层位移反应进行了比较。     

Relating the Morphology of Poly(p‐phenylene vinylene)/Methanofullerene Blends to Solar‐Cell Performance

The performance of bulk‐heterojunction solar cells based on a phase‐separated mixture of donor and acceptor materials is known to be critically dependent on the morphology of the active layer. Here we use a combination of techniques to resolve the morphology of spin cast films of poly(p‐phenylene vinylene)/methanofullerene blends in three dimensions on a nanometer scale and relate the results to the performance of the corresponding solar cells. Atomic force microscopy (AFM), transmission electron microscopy (TEM), and depth profiling using dynamic time‐of‐flight secondary ion mass spectrometry (TOF‐SIMS) clearly show that for the two materials used in this study, 1‐(3‐methoxycarbonyl)propyl‐1‐phenyl‐[6,6]‐methanofullerene (PCBM) and poly[2‐methoxy‐5‐(3′,7′‐dimethyloctyloxy)‐1,4‐phenylene vinylene] (MDMO‐PPV), phase separation is not observed up to 50 wt.‐% PCBM. Nanoscale phase separation throughout the film sets in for concentrations of more than 67 wt.‐% PCBM, to give domains of rather pure PCBM in a homogenous matrix of 50:50 wt.‐% MDMO‐PPV/PCBM. Electrical characterization, under illumination and in the dark, of the corresponding photovoltaic devices revealed a strong increase of power conversion efficiency when the phase‐separated network develops, with a sharp increase of the photocurrent and fill factor between 50 and 67 wt.‐% PCBM. As the phase separation sets in, enhanced electron transport and a reduction of bimolecular charge recombination provide the conditions for improved performance. The results are interpreted in terms of a model that proposes a hierarchical build up of two cooperative interpenetrating networks at different length scales.     

Insulating safety analysis of the hot-line sweeping robot

This paper presents a method of calculating the insulating safety distances for hot-line working robots at high voltage when dielectric is adulterated with conducts. Also, finite element method is adopted to calculate the electric field strength to find whether it is beyond the critical. The above methods have been applied to analyze the insulating safety of the robot for hot-line sweeping post insulators in a 220 KV substation. They have also been testified by experimentations.     

低温液体冷却循环器的研究与开发

根据低温生物、生化实验研究和产品小试时应用低温条件的特点，提出机械制冷的冷却循环器，讨论了工作原理和制冷量计算，对其制冷系统和温度控制进行介绍。     

石墨电极高温抗氧化技术研究现状

概述石墨电极抗氧化技术的研究现状，重点介绍选择抗氧化涂层体系的要求及涂层制备方法，包括包埋浸渗法、化学气相沉积法、等离子喷涂法及溶胶--凝胶法．展望了石墨电极材料高温抗氧化涂层研究的方向．     

DCA-112催化裂化抑焦剂的工业应用

针对改善催化裂化反应微环境研制开发的DCA - 112催化裂化抑焦剂 ,具有抑制生焦、改善产品分布、应用流程简单、加注方便等特点 ,经中石化长炼分公司 1Mt/a重油催化装置工业应用表明 ,在相近的工艺条件下 ,掺渣比提高 4 13个质量百分点 ,总液收提高 1 0 2个质量百分点。